Kramer TP-46 Component Video or Computer Graphics Video with Audio over Twisted Pair Receiver
Kramer TP-46 Component Video or Computer Graphics Video with Audio over Twisted Pair Receiver is a twisted pair transmitter and receiver for component video (YUV) or computer graphics video and unbalanced stereo audio or S/PDIF audio signals. The TP-45 transmitter converts an audio and video signal to a twisted pair signal and the TP-46 converts the twisted pair signal back into audio and video signals.
NOTE: This product has been discontinued. See the above SIMILAR Tab for equivalent products or, if not there, call us at 833-WOLFPACK (833-965-3722) right now to discuss your needs.
Kramer TP-46 Component Video or Computer Graphics Video with Audio over Twisted Pair Receiver
Sync Polarity Settings - H & V switches for improved HDTV compatibility with the CAT 5 outputs.
Power Connect System - Only one unit in a system, the transmitter or the receiver needs to be connected to a power source when the devices are within 50m (150ft) of each other.
Link LED - Indicates the receiver is receiving a signal.
System Range - Up to 100m (330ft).
Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5.
Why not buy this Kramer TP-46 Component Video or Computer Graphics Video with Audio over Twisted Pair Receiver today?
Specs
Kramer TP-46 Component Video or Computer Graphics Video with Audio over Twisted Pair Receiver
INPUT: 1 CAT 5 LINE IN on an RJ-45 connector (video/audio)
OUTPUTS
1 CAT 5 line extension on an RJ-45 connector (video/audio)
1 VGA/UXGA 1Vpp/75? on a 15-pin HD connector
1 stereo analog audio, 0dBu/1k?, 0.5V/75?, on a 3.5mm jack
1 digital S/PDIF audio on an RCA connector
1 component 1Vpp/75? (Y, Pb, Pr) on 3 RCA connectors
Call 833-WOLFPACK (833-965-3722) for Free Lifetime Tech Support or Product Suggestions )
