This Kramer DTAXRD2-IN2-F34/STANDALONE 2-Channel 4K HDR HDMI over HDBaseT 2.0 DSC Input Card with Analog Audio is a 2−channel, 4K@60Hz (4:4:4), DSC, HDMI, analog audio, bidirectional RS−232, Ethernet, & IR over HDBaseT twisted pair receiver card for compatible Kramer Modular Multi−Format Digital Matrix Switchers. DTAxrD2−IN2−F34 inputs two extended−reach HDBaseT signals with selectable embedded/de–embedded analog audio, bidirectional RS−232, Ethernet, and IR from the line to the chassis.
Kramer DTAXRD2-IN2-F34/STANDALONE 2-Channel 4K HDR HDMI over HDBaseT 2.0 DSC Input Card with Analog Audio Features:
- Max. Data Rate — 18Gbps (6Gbps per graphics channel), 10Gbps DSC over CAT cable.
- Max. Resolution — 4K@60Hz (4:4:4).
- Analog Audio Embedding/De–embedding — On the same jack.
- HDBaseT Technology — HDTV compatible, HDCP 2.2/1.4 compliant.
- System Range — Up to 100m at normal mode (4K), up to 130m (430ft) at normal mode (2K), up to 180m (590ft) ultra mode (1080p @60Hz @24bpp). Note: When using Kramer HDBaseT cables.
- Ethernet Extension — Ethernet interface data flows in both directions, allowing extension of up to 100Mbps Ethernet connectivity for LAN communication and device control.
- Bidirectional RS–232 Extension — Serial interface data flows in both directions, allowing data transmission and device control.
- Bidirectional Infrared Extension — IR interface data flows in both directions, allowing remote control of peripheral devices located at either end of the extended line.
- 3D Pass–Through
Why not buy this Kramer DTAXRD2-IN2-F34/STANDALONE 2-Channel 4K HDR HDMI over HDBaseT 2.0 DSC Input Card with Analog Audio today?
Kramer DTAXRD2-IN2-F34/STANDALONE 2-Channel 4K HDR HDMI over HDBaseT 2.0 DSC Input Card with Analog Audio Specifications:
INPUTS
- 2 HDBaseT: On RJ–45 connectors
PORTS
- 2 Unbalanced Audio: On a 6–pin terminal block connector
- 2 RS-232: On a 6–pin terminal block connector
- 2 IR: On a 4–pin terminal block
- 1 Ethernet: On an RJ–45 connector
EXTENSION LINE
- Compression: Low–level standard DSC compression for signals above 4K@60 (4:2:0)
- 4K@60 (4:4:4) Range with Compression: Up to 100m (330ft)
- 4K@60 (4:2:0) Range with No Compression: Up to 100m (330ft)
- Full HD (1080p@60Hz) Range with No Compression: Up to 130m (430ft),
- Full HD (1080p@60Hz) Range in Ultra−Long Mode: Up to 180m (590ft)
- Compliance: HDBaseT 2.0
- Note: Use Kramer shielded cables to achieve optimum extension ranges
VIDEO
- Max Bandwidth with Compression: 17.95Gbps (5.98Gbps per graphic channel)
- Max Bandwidth with No Compression: 10.2Gbps (3.4Gbps per graphic channel)
- Max Resolution with Compression: 3840x2160@60Hz 4:4:4 24bpp
- Max Resolution with No Compression: 4096x2160@60Hz 4:2:0 24bpp
- Compliance: HDCP 2.2, HDR 10
EXTENDED ETHERNET
- Bandwidth: Up to 100Mbps
EXTENDED RS-232
- Baud Rate: 300 to 115200
POWER
- Consumption: 21.5W
ENVIRONMENTAL CONDITIONS
- Operating Temperature: 0° to +40°C (32° to 104°F)
- Storage Temperature: –40° to +70°C (–40° to 158°F)
- Humidity: 10% to 90%, RHL non–condensing
REGULATORY COMPLIANCE (STANDARDS COMPLIANCE)
- Safety: CE
- Environmental: Complies with appropriate requirements of RoHs and WEEE
PRODUCT DIMENSIONS
- 25.00cm x 13.00cm x 2.00cm (9.84" x 5.12" x 0.79" ) W, D, H
PRODUCT WEIGHT
- 0.2kg (0.5lbs) approx.
SHIPPING DIMENSIONS
- 29.30cm x 16.50cm x 5.90cm (11.54" x 6.50" x 2.32" ) W, D, H
SHIPPING WEIGHT
- 0.4kg (0.9lbs) approx
Why not buy this Kramer DTAXRD2-IN2-F34/STANDALONE 2-Channel 4K HDR HDMI over HDBaseT 2.0 DSC Input Card with Analog Audio today?
Kramer DTAXRD2-IN2-F34/STANDALONE User Manual
Kramer DTAXRD2-IN2-F34/STANDALONE Quick Start
