Kramer C-AFDM/AFDM-66 DVI All Fiber Optic Cable with Converters
Kramer C-AFDM/AFDM-66 DVI All Fiber Optic Cable with Converters is constructed of high-performance fiber optic cable with DVI-D connectors on each end. It transmits DVI-D signals extremely long distances with pristine digital image quality.
NOTE: This product has been discontinued. See the above SIMILAR Tab for equivalent products or, if not there, call us at 833-WOLFPACK (833-965-3722) right now to discuss your needs.
Kramer C-AFDM/AFDM-66 DVI All Fiber Optic Cable with Converters Features:
Built-in Fiber Optic Converters - The C-AFDM/AFDM has converters built into DVI-D connectors on both ends of the cable. The transmitter (connected to the source) converts DVI signals into fiber-optic light pulses that can travel much greater distances than traditional copper-based systems. The receiver converts the light pulses back to DVI-D signals that connect to a display or other receiving device. Note: A FODM series cable is an active electronic product which, like any other, comes with a slight chance of needing removal or replacement in the future. Therefore, we suggest that these not be permanently fixed into installations as might be appropriate with an ordinary cable. If permanent installation is required, see our detachable equivalents such as the 610T/R, 602R/T, 621T/R or 622T/R.
High Resolution - Compatible with all DVI single link and HDTV standards up to 1080p and all VESA resolutions up to WUXGA (1920x1200) at 60Hz refresh rate with 1 pixel/clock mode.
Zero EMI - The cable does not emit any electromagnetic interference or emission, making it suitable for medical or other EMI sensitive environments.
Flexible Power Options - The transmitter requires DC power from either the graphic card or AC/DC power from an external +5V adapter. The receiver requires external power (supplied).
Why not buy this Kramer C-AFDM/AFDM-66 DVI All Fiber Optic Cable with Converters today?
Kramer C-AFDM/AFDM-66 DVI All Fiber Optic Cable with Converters Specifications:
Compliance with DVI Standard: Supports DVI1.0 and DDC2B, fully implemented by fiber-optic communication, HDCP compatible
Extension Limit: 500m (>1,650 feet) for WUXGA (1920 x 1200) at 60Hz refresh rate
Resolution: Up to WUXGA at 60Hz
Pure 8 Strands Fiber Optic
Cable: Riser Jacket of retardant PVC employing 8 strands
Tensile Load: 600N (cable only)
Minimum Bend Radius: 12.0cm
Outer Diameter of Cable: 5.5mm
Dimensions: 3.9cm x 1.54cm x 5.3cm (W, D, H)
Power Source: Receiver: 5 VDC, <500mA; Transmitter: 5 VDC, <500mA