Kramer 670T 4K60 4:2:0 HDMI Transmitter over Ultra–Reach MM Fiber Optic
This Kramer 670T 4K60 4:2:0 HDMI Transmitter over Ultra–Reach MM Fiber Optic is a high–performance 4K60Hz (4:2:0) HDMI over ultra–reach MM fiber optic transmitter. The 670T converts an HDMI signal to an optical signal that is transmitted over one single fiber optic cable to the 670RN receiver that converts it back to an HDMI signal.
NOTE: This product has been discontinued. See the above SIMILAR Tab for equivalent products or, if not there, call us at 833-WOLFPACK (833-965-3722) right now to discuss your needs.
Kramer 670T 4K60 4:2:0 HDMI Transmitter over Ultra–Reach MM Fiber Optic Features:
Max. Data Rate – 10.2Gbps (3.4Gbps per graphic channel) suitable for resolutions up to 4K at 30Hz, and for all HD resolutions. (When connected to the F670 input and/or output cards, 4K is not supported due to limitations of the VS–1616D and VS–3232DN.)
Supports 4K x 2K Resolution – 670T when used with 670RN.
EDID PassThru – Passes EDID signals between the source and display.
HDMI Support – Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS–HD, CEC.
Signal Transmission – Transmits four TMDS video channels as well as one low–speed channel for passing HDCP, EDID and a Hot Plug Detect (HPD) signal over one multimode fiber.
Laser Standards Compliance – IEC 60825–1, FDA 21CFR1040; Laser Class 1: Safety of laser products.
System Range – 1700m (5570ft) at 1080p @60Hz 12–bit over an optical cable, 400m (1300ft) at 4K resolution.
Cable – Multimode fiber optic OM3 cable with SC connectors.
Why not buy this Kramer 670T 4K60 4:2:0 HDMI Transmitter over Ultra–Reach MM Fiber Optic today?
Kramer 670T 4K60 4:2:0 HDMI Transmitter over Ultra–Reach MM Fiber Optic Specs:
INPUTS: HDMI connector
OUTPUTS: 1 optical connector
BANDWIDTH: Supports up to 3.5Gbps bandwidth per graphic channel for resolution 4K@60 UHD (4:2:0), 4Kx2K
COMPLIANCE WITH HDMI STANDARD: Supports HDMI using fiber optic communication links and DDC2B
EXTENSION LIMIT: 1700m (>5570 feet) for 1080p/60Hz
INSERTION LOSS FROM TRANSMITTER TO RECEIVER: Must not exceed 10dB
FIBER-OPTIC CONNECTION: SC connectors for multimode (OM3) fiber cable (not supplied with the unit)
INDICATOR LEDS: Video, source, acceptor fiber and on LEDs
POWER CONSUMPTION: 5V DC, 250mA
INCLUDED ACCESSORIES: Power supply, bracket installation kit
OPTIONS: HDMI/HDMI male to male cable
PRODUCT DIMENSION: 12.00cm x 7.15cm x 2.44cm (4.72" x 2.81" x 0.96" ) W, D, H
PRODUCT WEIGHT:0.2kg (0.4lbs) approx
SHIPPING DIMENSION: 23.20cm x 12.00cm x 8.90cm (9.13" x 4.72" x 3.50" ) W, D, H