Intelix DIGI-BSR-4K HDBaseT 4K scaling receiver W/PoE, Audio-De-Embed extends HDMI over a single solid core shielded Category 5e or greater cable using the Valens VS100RX HDBaseT chip and scales the source content up or down to the native resolution of the connected display. The DIGI-BSR-4K supports 1080p, full 3D or 4k x 2k video signals up to 100 meters (328 feet) including multichannel audio and HDCP 1.4. Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. Additional connections include bidirectional IR, bidirectional RS232, Ethernet pass-through with a 2-port network switch, and analog and digital audio de-embedding.
NOTE: This product has been discontinued. See the above SIMILAR Tab for equivalent products or, if not there, call us at 800-841-9238 right now to discuss your needs.
The DIGI-BSR-4K requires local power, but it can provide power to a compatible HDBaseT transmitter. The power supply is included with the extender. The bidirectional wideband IR, bidirectional RS232, and Ethernet pass-through capabilities make the DIGI-BSR-4K compatible with most control systems. The IR emitter (DIGIB-EMT) and IR receiver (DIGIB-EYE) are sold separately. The two-port network switch on the DIGI-BSR-4K allows a second device to share the 100BaseT Ethernet pass-through connection without adding additional hardware to the installation.
The DIGI-BSR-4K is compatible with all Intelix HDBaseT product offerings and any product that meets the HDBaseT specifications.