The HDMI Repeater is connected at the end of a HDMI cable. If you are not getting a picture with a long HDMI cable or you are getting sparkles this HDMI Repeater will allow you to see your HDMI video and hear your audio. It is great to use with a projector when there is no way to install another AC receptacle as this HDMI Repeater does not require AC.
HDMI Repeater Features:
Extend a 1080p (24Hz) HDMI signal up to 150-Feet from the source
Use 22 AWG HDMI cables in most applications
When extending a 1080p (24Hz) signal more than 75-Feet, use cable made with 22Awg wiring
22 Awg HDMI cable is also needed when extending a 3D signal more than 50-Feet. A 3D signal can be extended up to 125-Feet using 24Awg HDMI cable
Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
No AC adapter is needed as they use the +5V signal off of pin 18 of the HDMI cable to power it. If you feel you do need an HDMI booster with an AC adapter one is offered above that works to 100 feet.
NOTE 1: These HDMI boosters works only at the end, or near the HDTV, not at the source device. The HDMI booster is placed near the display to remove any noise that has been generated by a long HDMI cable.
NOTE 2: PC video cards and AV Surround sound receivers are notorious for not conforming to the HDMI spec of providing a stable 5 volt at 55 mill-amp output. We have seen many Onkyo and other AV receivers who can't drive long HDMI cables due to their poor HDMI switching design.
We have seen some laptops and AV receivers that only measure 30ma which means you can't use a long HDMI cable or another HDMI device on the AV receivers output. This front end HDMI booster may be able to offset that problem if you are not getting a signal when using a long HDMI cable.
If you have a PC, laptop and/or an AV receiver that is experiencing sparkles or no signal you may need the VOLTAGE INJECTOR also.
Th HDMI Repeater works by regenerating the high definition video and digital audio it receives from the the source and transmits it along to the second cable at the extended display. The HDMI Repeater only works if placed at the end of the cable. It's equipped with HDMI (High Definition Multimedia Interface) connectors and passes through HDCP (high bandwidth digital content protection) compliant video. HDCP is a standard encoded into the signal to prevent it from being pirated. Sources, displays and any repeater device in between must be able to pass HDCP in order to work properly
How the HDMI Repeater works: You connect the HDMI cable on one side of the HDMI extender and the display闁瑰墎妫梐ble on the other side. The HDMI extender sits between the end of your HDMI cable and your display. The HDMI Repeater is highly effective to distances up to 100 feet.
Why not buy this HDMI Repeater today?
HDMI Repeater Features:
Extends high definition video and digital audio using a single box solution
Allows you to extend an HDMI cable up to 100 feet
Supports High Definition video up to 1080p
HDMI Repeater Specifications:
HDMI Amplifier Bandwidth: 1.65 GHz
Actual Bandwidth: 1.6 GHz
Input Video Signal: 1.2 Volts p-p
Input DDC Signal: 5 Volts p-p (TTL)
HDMI Input/Output Connector: Type A 19 pin
This 1080p HDMI Repeater can be used to boost the signal from the following devices:
Any high definition Dish Network and DirecTV receiver with HDMI outputs
High definition TiVo's with HDMI outputs
Any high definition cable receiver with HDMI outputs
Canadian Rogers, Shaw, Bell ExpressVu and Star Choice receivers with HDMI out, or DVI out with a converter
Any "Over The Air" (OTA) high definition receiver with HDMI outputs
Sony PS3, HD DVD and Blu-ray DVD players
Any Xbox360 with HDMI outputs
Any upconverting DVD player with HDMI outputs
Any DVHS VCR with HDMI outputs
An APPLE TV with HDMI outputs
Any PC video card with HDMI outputs
Any high definition camcorder with an optional type C to standard HDMI cable
Many A/V surround sound receivers with HDMI switching that include the proper chip set. Call your AV receiver supplier to discuss your application or us.
Any HDCP compliant HDTV, monitor and projector. If the source is HDCP compliant and your TV is not, you will not get a picture. Please check your TV manual or the manufacturers web site.
A: This HDMI booster works only at the end, or near the HDTV, not at the source device. The HDMI booster is placed near the display to remove any noise that has been generated by a long HDMI cable. Connect the output of the source device into the input of HDMI Repeater and connect the output to the HDMI display unit. The HDMI Repeater is put close to the HDMI display unit (Input cables are optional)
HDTV Supply includes a 1 Year Limited U.S. Warranty on this HDMI Repeater. The warranty states that (a) its products will perform substantially in accordance with the accompanying written materials for a period of 1 year from the date of receipt and (b) that the Product will be free from defects in materials & workmanship under normal use & service for a period of 1 year. In order to get a warranty replacement for a defective item, HDTV Supplys Support Team will verify the product is eligible for warranty. An RMA number will then be issued. Shipped replacements will be in like new conditions, tested and all components included. A 30-day RETURN also comes with this warranty.
HDTV Supply also sells a 3 and 5 Year Extended Warranty for this HDMI Repeater . Please go to Extended Warranties or see the above Options to purchase it.
Ask a Question
Questions & Answers
Ask a question about the HDMI Repeater - 1080p Rated - Great For Projectors or Call 833-WOLFPACK (833-965-3722)
This product may be eligible to be purchased through the United States Governments SEWP program, similar to their GSA program.
The NASA SEWP (Solutions for Enterprise-Wide Procurement) provides the latest in Information and Communications Technology (ICT) and Audio-Visual (AV) products and services for all Federal Agencies and their approved contractors.
If you are a government agency and want to see whether HDTV Supply has this product in the SEWP database go to our our SEWP Contract Holder RedHawk IT Solutions, LLC to allow you to maybe order this product from the United States Governments SEWP program. It is very easy to place your order, go to the link above and enter HDTV Supply and there you will see a list of part numbers of what we currently have. If you do not see it than give us a call at 833-WOLFPACK (833-965-3722) and we may be able to enter it.
Our SEWP Contract Holder RedHawk IT Solutions partner has the following credentials:
Their SEWP Federal Contracts are:
SEWP Contract Number: NNG15SD38B
Group: Group B_SDVOSB
SEWP Contract Number: NNG15SD88B
Group: Group C
The SEWP Program Office manages a suite of government-wide IT products and services contracts that enable NASA and all Federal Agencies to achieve their missions and strategic initiatives by providing streamlined access to critical technologies and solutions. The Program provides best value for the Federal Government and American taxpayer through innovative procurement processes, premier customer service and outreach, acquisition insight, and partnership with Government entities and Industry.
For a complete listing of HDTV Supply products from us, or our other vendors, call 833-WOLFPACK (833-965-3722).
HDMI Repeater - 1080p Rated - Great For Projectors
Scroll Left & Right To See 20 Of Your Recently Viewed Items Below