protects HDMI devices against Cable Discharges, Electrostatic discharge and Lightning as the clock within the HDMI technology is very susceptible to surge damage. It has a passive design and no power supply is supplied so surges cannot blow the HDMI Surge Protector out.
This HDMI Surge Protector is active on the HDMI TMDS channels and protects against lightning ESD and surges. Its use is to protect expensive HDMI installations as well as keep your equipment operational during bad weather. This is an excellent device to protect against static shocks, surges, and lightning strikes.
HDMI Surge Protector Features:
Protect HDMI Input and Output from ESD and lighting surge.
Solid-state silicon-avalanche technology
Low TMDS signal loss
HDMI 1.4 with 3D and HDMI Ethernet Channel (HEC) support
Meets or exceeds IEC 61000-4-2 (ESD) 15kV (air), 8kV (contact) for surge protection
Meets or exceeds IEC 61000-4-4 (EFT) 40A (5/50ns) for surge protection
Meets or exceeds IEC 61000-4-5 (Lightning) 5A (8/20 us) for surge protection.
HDMI Surge Protector Installation Tips: Place the HDMI Surge Protector before or after the HDMI device for
additional protection for ESD and lightning surge. You can also attach the ground wire to screw hole of the HDMI socket for extra electric shock protection. Our HDMI Surge Protector will protect your HDMI Components from voltage spikes that may damage them.
Why not buy this HDMI Surge Protector today?
HDMI Surge Protector Specs::
Operating Temperature Range: 0 to +35C (32 to +95 F)
Operating Humidity Range: 5 to 90 % RH (no condensation)
Input Video Signal: 0.5-1.0 volts p-p
Input DDC Signal: 5 volts p-p (TTL)
Dimensions: 65mmL x 46mmW x 25mmH or 2.6" L x 1.8" W x 1.0"H
Mass (Main unit): 80g/2.8oz
HDMI Surge Suppressor ESD Protection: ESD (Electrostatic Discharge) is a very normal phenomenon in daily life. But if happening on electronic products, it could be a disaster. ESD can lower their service life or even cause serious damage to them. This HDMI Surge Suppressor is equipped with ESD protector inside.
HDMI Surge Suppressor Surge Protection: Surge means a sudden or momentary current or voltage generated in circuit (500V in average), usually lasts 1/120~2 seconds. Surge can possibly damage or influence the performance of electronic devices, leading to product failure or shorter service life. This HDMI surge protector offers high surge protection covering ±17KV ESD, 40A surge current and follows IEC 61000-4-2 standard. Inside circuits and components make sure every HDMI cable is safe.
HDTV Supply includes a 1 Year Limited U.S. Warranty on this HDMI Surge Protector. The U.S. warranty states that (a) its products will perform substantially in accordance with the accompanying written materials for a period of 1 year from the date of receipt & (b) that the HDMI Surge Protector will be free from defects in materials & workmanship under normal use & service for a period of 1 year. In order to get a warranty replacement for a defective item, HDTV Supplys Support Team will verify the product is eligible for warranty. An RMA number will then be issued. Shipped HDMI Surge Protector replacements will be in like new conditions, tested & all components included. A 30-day RETURN also comes with this warranty as well as Free Lifetime Tech Support.
HDTV Supply also sells a 3 and 5 Year Extended U.S. Warranty for this HDMI Surge Protector. Please go to Extended Warranties or see the above Options to purchase it.
Ask a Question
Questions & Answers
Ask a question about the HDMI Surge Protector or Call 833-WOLFPACK (833-965-3722)
This product may be eligible to be purchased through the United States Governments SEWP program, similar to their GSA program.
The NASA SEWP (Solutions for Enterprise-Wide Procurement) provides the latest in Information and Communications Technology (ICT) and Audio-Visual (AV) products and services for all Federal Agencies and their approved contractors.
If you are a government agency and want to see whether HDTV Supply has this product in the SEWP database go to our our SEWP Contract Holder RedHawk IT Solutions, LLC to allow you to maybe order this product from the United States Governments SEWP program. It is very easy to place your order, go to the link above and enter HDTV Supply and there you will see a list of part numbers of what we currently have. If you do not see it than give us a call at 833-WOLFPACK (833-965-3722) and we may be able to enter it.
Our SEWP Contract Holder RedHawk IT Solutions partner has the following credentials:
Their SEWP Federal Contracts are:
SEWP Contract Number: NNG15SD38B
Group: Group B_SDVOSB
SEWP Contract Number: NNG15SD88B
Group: Group C
The SEWP Program Office manages a suite of government-wide IT products and services contracts that enable NASA and all Federal Agencies to achieve their missions and strategic initiatives by providing streamlined access to critical technologies and solutions. The Program provides best value for the Federal Government and American taxpayer through innovative procurement processes, premier customer service and outreach, acquisition insight, and partnership with Government entities and Industry.
For a complete listing of HDTV Supply products from us, or our other vendors, call 833-WOLFPACK (833-965-3722).
HDMI Surge Protector
Scroll Left & Right To See 20 Of Your Recently Viewed Items Below