This 2x1 & 3X1 Automatic HDMI Switch w/Built in HDMI Cable routes HDMI high definition video (in multiple resolutions up to 1080p) and its inherent digital audio
from any one of the two sources to one display unit. It is also 3D compliant. This automatic HDMI switch senses when you turn ON a device and automatically switches to it. Unlike other switchers, this switch does not require human interface. Once a signal goes away the switcher will automatically change to the other input.
Automatic HDMI Switch Features:
HDMI 1.4
2D and 3D compliant
Two version above to pick from...2x1 and a 3x1
Auto switching intelligent function
The automatic hdmi switch has buttons to select if your system has units that are always ON
No power source needed as powered from the HDMI sources
Built-in fixed HDMI cable. The cable itself is about 20 inches and from the connector to the mini switcher end is 2 feet long.
NOTE: A few devices like some DVR's, cable and satellite receivers are "always ON" so auto-sensing switchers, like these, need the "always On" devices, to be at a lower video input so it doesn't block other switcher devices. If you have 2 devices that are always ON you'll need to use the buttons and / or remote control ( if they have them ) to switch inputs. An Apple TV keeps its HDMI port active even in the sleep state so auto-switching may not work with the Apple TV. Manual switching can still be used.
Any high definition Dish Network and DirecTV receiver with HDMI outputs
High definition TiVo's with HDMI outputs
Any high definition cable receiver with HDMI outputs
Canadian Rogers, Shaw, Bell ExpressVu and Star Choice receivers with HDMI out, or DVI out with a converter
Any "Over The Air" (OTA) high definition receiver with HDMI outputs
Sony PS3, HD DVD and Blu-ray DVD players
Any Xbox360 with HDMI outputs
Any upconverting DVD player with HDMI outputs
Any DVHS VCR with HDMI outputs
An APPLE TV with HDMI outputs
Any PC video card with HDMI outputs
Any high definition camcorder with an optional type C to standard HDMI cable
Many A/V surround sound receivers with HDMI switching that include the proper chip set. Call your AV receiver supplier to discuss your application or us.
Any HDCP compliant HDTV, monitor and projector. If the source is HDCP compliant and your TV is not, you will not get a picture. Please check your TV manual or the manufacturers web site.
HDTV Supply is a leader in supplying 3D equipment for this new, fast growing 3DTV market. Our test lab includes the latest equipment for designing, testing and supporting 3D video equipment. The chips sets we use support the below 3D formats and work with many of our HDMI 1.3 and HDMI 1.4 compliant devices. This 3D HDMI switcher supports these 3D formats:
Side-by-Side 3D Format
Top-and-Bottom 3D Format
Blu-ray 3D Format
Frame packing
and more
We not only test this 3D HDMI switcher with lab equipment we also test many of our 3D devices with 3D products you are likely to use:
Sony PS3 with the 3D 3.41 firmware
Samsung model PN50C7000YF 3DTV
Samsung model BD-C6900 3D Blu-ray player FORCED to 1080p
Samsung model SSG-P2100T 3D glasses
DirecTV models HR21-100 and the HR24 high definition receiver.
It works with all HDMI devices including the new 3D units.
The 3D viewing results were awesome in our lab and did not have any picture or audio degradation. The normal and standard (2D) results equally exhibited a superb picture quality.
Q/A
Q: How does auto-sensing work?
A: The operation of the auto-sensing will be impacted by the source devices operation in standby mode. If power is still applied to the HDMI output when the source is in standby mode, the switcher will treat this source as if it is闁圭厧. A few devices like some DVR's, cable and satellite receivers are "always ON" so auto-sensing switchers, like these, need the "always On" devices, to be at a lower video input so it doesn't block other switcher devices.
If you have 2 devices that are always ON you'll need to use the buttons and / or remote control ( if they have them ) to switch inputs. An Apple TV keeps its HDMI port active even in the sleep state so auto-switching may not work with the Apple TV. Manual switching can still be used.
Warranty
HDTV Supply includes a 1 Year Limited Warranty on this product. The warranty states that (a) its products will perform substantially in accordance with the accompanying written materials for a period of 1 year from the date of receipt and (b) that the Product will be free from defects in materials & workmanship under normal use & service for a period of 1 year. In order to get a warranty replacement for a defective item, HDTV Supplys Support Team will verify the product is eligible for warranty. An RMA number will then be issued. Shipped replacements will be in like new conditions, tested and all components included. A 30-day RETURN also comes with this warranty.
HDTV Supply also sells a 3 and 5 Year Extended Warranty for this product. Please go to Extended Warranties or see the above Options to purchase it.
Pictures
Ask a Question
Questions & Answers
Ask a question about the 2x1 or 3X1 Automatic HDMI Switch w/Cable - No Power Needed - 2D&3D or Call 833-WOLFPACK (833-965-3722)
Software
FAQ
OEM
2x1 or 3X1 Automatic HDMI Switch w/Cable - No Power Needed - 2D&3D