Hall Research UHBX-S HDMI Video Extender with Bidirectional IR, and RS232 (Sender)
Hall Research UHBX-S HDMI Video Extender with Bidirectional IR, and RS232 (Sender) sends uncompressed HDMI, bidirectional IR and full-duplex RS232 up to 150 meters (500 feet) using a single Cat6 cable.
NOTE: This product has been discontinued. See the above SIMILAR Tab for equivalent products or, if not there, call us at 833-WOLFPACK (833-965-3722) right now to discuss your needs.
The extender supports all HDMI or single-link DVI video signals of virtually any resolution. PC resolutions are supported upto 1920x1200 and HDTV resolutions of UHD (4Kx2K) are supported.
Two user selectable distance modes are available: "Standard" and "Long Reach". These modes are explained further in section 4.4 of the users manual.
The extenders comply with HDBaseT™ specifications and are compatible with all other certified HDBaseT™ gear. For example, the UHBX-S transmitter can be plugged into any projector or display with compatible input such as Panasonic's DIGITAL LINK, Epson's PowerLite Pro series and others.
Full-duplex RS-232 extension is provided that can operate at any baud rate to 115,200 bps. The extender can also extend IR from one end to the other. IR Detector and IR Emitter cables are sold separately. The IR extension preserves the modulation (carrier) frequency and provides compatibility to all standards. It supports modulation range from 30 KHz to 60 KHz.
Hall Research UHBX-SHDMI Video Extender with Bidirectional IR, and RS232 (Sender) Features:
Extends HDMI or DVI video to 500 ft on just one Cat6
Includes RS232 and IR extension in both directions
Supports virtually all HDMI and DVI resolutions including 4Kx2K
Sturdy metal enclosures with mounting provisions
Complies fully with HDBaseT standard
Fully isolates ground between TX and RX sides
Compact, Rugged, Reliable, and Economical
Made in USA
Why not buy this Hall Research UHBX-S HDMI Video Extender with Bidirectional IR, and RS232 (Sender) today?
Hall Research UHBX-S HDMI Video Extender with Bidirectional IR, and RS232 (Sender) Specifications:
Standard Mode (STD): 330 ft (100m)
Long Reach Mode (LR) : 500 ft (150m)
DVI (single link) and HDMI (compliant with HDMI 1.4 video specifications including 12 bit color depth, 3D video and 4K support)
Supports 4K@60 Hz (4:2:0 8 bit color) or 4K@30 Hz (4:4:4 and 8 bit color)
Signal Type: TMDS
Connectors: Locking HDMI
DVI: VGA (640x480) to WUXGA (1920x1200)
HDTV: 480i to 1080p
Digital Cinema: 4K (4096x2160) - Not supported in Long Reach
Audio Formats: All HDMI Embedded Audio including: LPCM 7.1CH, Dolby TrueHD and DTS-HD Master Audio (32-192kHz sample rate)
DDC: Pass-Thru DDC for reading EDID directly from remotely connected LCD and HDCP handshake
CEC: Pass-Thru DDC for Consumer Electronics Control compatible devices
RS232: Bi-directional (full-duplex) any baud rate upto 115,200
IR: Extended in both directions. Carrier modulation range from 30 KHz to 60 KHz
100 VAC to 240 VAC, 50-60 Hz, external; 5 VDC, 2 A, regulated
Actual DC current Sender: 0.60A (approx), Receiver: 0.95A (approx)
Sender: 3.0 watts (10 BTU) maximum
Receiver: 4.8 watts (16 BTU) maximum
Storage: -40 to +158 ˚F (-40 to +70 ˚C) / 10% to 90%, non-condensing
Operating: +32 to +122 ˚F (0 to +50 ˚C) / 10% to 90%, non-condensing
Mounting: End plates have L bracket with hole for surface mounting
Enclosure: Metal (Aluminum ends and Aluminum extrusion)
Dimensions: 1.18" H x 4.13" W x 4.57" D (30mm H x 105mm W x 116mm D) Depth excludes connectors
Sender: 8.7 oz (0.54 lb or 246 g)
Receiver: 9 oz (0.56 lb or 255 g)
Kit (shipping) 40 oz (2.5 lb or 1.13 Kg) includes: sender, receiver, power supply, power cord, HDMI cable, manual, and packaging