Hall Research Daisy-Chainable HDBaseT™ Receiver with IR & addressable RS232 Control
Hall Research Daisy-Chainable HDBaseT™ Receiver with IR & addressable RS232 Control is an HDBaseT™ Receiver with integrated HDBaseT™ transmitter for connection to downstream HDBaseT™ receiver(s) in a daisy-chain fashion. It provides a local HDMI output, an RS-232 port for controlling displays, and it also extends IR signals (IR signal detected at source is broadcast to all receivers - IR cables sold separately).
The RS-232 port can be used to send commands (such as power on/off) to compatible displays and projectors. This can be done either automatically (autonomously by detecting video), or directed by an external Serial Control Device using Hall Research's simple command set.
When RS-232 operation is under external control, each receiver in the daisy chain can be individually addressed for sending specific commands at that particular node. In order to communicate with a given receiver, each receiver in the daisy-chain is assigned a unique address.
The UHBX-R-XT provides a Mini-USB port that is used to assign the box address, configure operation mode, upload internal commands (required for automatic on/off control), and more. A free Windows GUI software is available on the product's webpage for users who want to take advantage of the product's control capabilities.
The distance between receivers (in a daisy chain), is 100 meters (328 ft) maximum, however, if the video is limited to 1080p (24 bit color or 8bits/color), then users can utilize the "Long Reach" function of the receiver that allows UTP cables of up to 150 meters (500 ft) between consecutive receivers in the daisy-chain (Long-Reach mode does not support 4K or deep color).
Hall Research UHBX-R-XTHDMI on Cat6 (HDBaseT™) Wall Plate Transmitter Features:
Extends uncompressed HDMI video, RS232, and IR, up to 500 feet on a single CAT6
Supports multiple units in daisy-chain to allow extending video and data to very long distances
At Full-HD (1080p), up to 8 receives can be daisy chained
Individually addressable RS-232 ports on each receiver for controlling connected displays
Can be directed to send out RS-232 commands on the fly, or to send any of the commands programmed in its internal memory
Can detect video and use RS-232 to turn displays on and off automatically (from commands uploaded to its internal memory)
Multiple units in the daisy chain can be individually addressed
IR extension (from source to all receivers)
Supports HDCP, 3D and Deep color
Sturdy metal enclosures with L brackets for mounting
Complies fully with HDBaseT™ standard
Compact, Rugged, Reliable, and Economical
Made in USA
Hall Research NOTE: HDTV Supply supports our Federal, State & Local Governments, Schools, Universities & Military accounts by offering an additional discount if your email address ends in .EDU & .GOV & .MIL & .ORG. Please see Options below.
Why not buy this Hall Research Daisy-Chainable HDBaseT™ Receiver with IR & addressable RS232 Control today?
Hall Research Daisy-Chainable HDBaseT™ Receiver with IR & addressable RS232 Control Specifications:
Video Standards: DVI (single link) and HDMI (compliant with HDMI 1.4 video specifications including 12 bit color depth, 3D video)
Signal Type: TMDS
Connectors: Locking HDMI
DVI Signal - VGA (640x480) thru WUXGA (1920x1200)
HDTV Signal - 480i through 1080p
Supports 4K@60 Hz (4:2:0 8 bit color) or 4K@30 Hz (4:4:4 and 8 bit color)
Audio Formats: All HDMI Embedded Audio including: LPCM 7.1CH, Dolby TrueHD and DTS-HD Master Audio (32-192kHz sample rate)
DDC: Pass-Thru DDC for reading EDID directly from remotely connected LCD and HDCP handshake
CEC: Pass-Thru DDC for Consumer Electronics Control compatible devices
RS232: Bi-directional (full-duplex) with baud rate, 9600 bps
IR: IR Emitter. Carrier modulation range from 30 KHz to 60 KHz
Power Supply: 100 VAC to 240 VAC, 50-60 Hz, external; 5 VDC, 3.2 A, regulated Actual DC current 1.8A max
Power: Receiver 5.5 watts (19 BTU) maximum
Temp/humidity: Storage: -40 to +158 ˚F (-40 to +70 ˚C) / 10% to 90%, non-condensing Operating: +32 to +122 ˚F (0 to +50 ˚C) / 10% to 90%, non-condensing
Mounting: End plates have L bracket with hole for surface mounting
Enclosure type: Metal (Aluminum ends, Aluminum Extrusion)
Dimensions: 1.18" H x 4.56" W x 4.17" D (30mm H x 116mm W x 106mm D) Depth excludes connectors
Product weight: Receiver 10 oz (0.63 lb or 284 g) Kit (shipping) 37 oz (2.3 lb or 1050 g) includes: receiver, power supply, power cord, USB cable, manual, and packaging
Vibration: ISTA 1A in carton (International Safe Transit Association)