Call 833-WOLFPACK (833-965-3722) for Free Lifetime Tech Support or Product Suggestions
Cart
SHOP BY BRAND  //  Hall Research  //  Hall Research Distribution Amps & Splitters  //  Hall Research UHBX-3S HDMI on HDBaseT 1x3 Splitter

Hall Research UHBX-3S HDMI on HDBaseT 1x3 Splitter

Hall Research UHBX-3S HDMI on HDBaseT 1x3 Splitter
Hall Research UHBX-3S HDMI on HDBaseT 1x3 Splitter
Hall Research UHBX-3S HDMI on HDBaseT 1x3 Splitter - Extra Image 1Hall Research UHBX-3S HDMI on HDBaseT 1x3 Splitter - Extra Image 2Hall Research UHBX-3S HDMI on HDBaseT 1x3 Splitter - Extra Image 3
Hall Research UHBX-3S HDMI on HDBaseT 1x3 Splitter
Hall Research UHBX-3S HDMI on HDBaseT 1x3 Splitter
Hall Research UHBX-3S HDMI on HDBaseT 1x3 Splitter

HDMI on HDBaseT 1x3 Splitter

Extend HDMI video to 3 remote displays using HDBaseT

Use a single UTP cable to extend video to 100 meters (330 ft)

Supports virtually all HDMI and DVI resolutions

Free Shipping & 3-Year Hall Research Warranty

Add'l Discounts to .EDU & .GOV & .MIL & .ORG

Part # UHBX-3S
Usually ships the same business day
Today's Price: $1,091.55
Ask Our WolfPack Experts
Customer Reviews 100% Positive Feedback

Features

Hall Research UHBX-3S HDMI on HDBaseT 1x3 Splitter

Hall Research UHBX-3S HDMI on HDBaseT 1x3 Splitter is an HDMI splitter with one local HDMI output and 3 HDBaseT™ outputs for extension to compatible receivers up to 150 meters using a single UTP. The Splitter supports HDCP, 3D, Deep Color and CEC. EDID management is integrated into the unit with "Pass-thru", "Learn", and "Emulate" features. Advanced users can use the USB port to download, edit, and upload EDID data to and from the device. The unit provides an RS-232 port that can individually address and control remote displays that feature RS-232 interface. The UHBX-3S provides convenient front panel LED status indicators for all HDBaseT™ parameters to quickly verify proper operation.

The UHBX-3S supports PoH (Power over HDBaseT™). Compatible receivers are powered from the sender using PoH standard so no additional power supplies are needed. The HDBaseT™ compliant PoH performs all necessary low voltage handshakes prior to injecting supply on the UTP line for maximum reliability, safety, and compliance.

Compatible receivers include the economical UH-1BT-R & UH-1BTX-R for HDMI only OR UHBX-R-PD that supports RS-232, PoH, and Long Reach modes.

For best results we recommend using Alliance approved cables listed at this site. For more information about our other HDBaseT™ products please follow the link below to the Product Selection Chart.

Hall Research UHBX-3S HDMI on HDBaseT 1x3 Splitter Features:

  • Extend HDMI video to 3 remote displays using HDBaseT™
  • Use a single UTP cable to extend video to 100 meters (330 ft)
  • Can send 1080p to 150 meters (500 ft) to Long Reach capable receivers
  • Supports virtually all HDMI and DVI resolutions
  • Local HDMI output for direct connection to a local display
  • EDID management with USB port for EDID manipulation using a PC
  • RS-232 port for sending commands to remote displays
  • Power-over-HDBaseT™ meets IEEE 802.3af standard

Hall Research NOTE: HDTV Supply supports our Federal, State & Local Governments, Schools, Universities & Military accounts by offering an additional discount if your email address ends in .EDU & .GOV & .MIL & .ORG. Please see Options below.

Why not buy this Hall Research UHBX-3S HDMI on HDBaseT 1x3 Splitter today?

Specs

Hall Research UHBX-3S HDMI on HDBaseT 1x3 Splitter Specifications

  • Input Port: 1x HDMI Female (Type A)
  • Output Port: 1x HDMI Female (Type A), 3 RJ45 connectors
  • Standards: DVI (single link) and HDMI (compliant with HDMI 1.4 video specifications including 12 bit color depth and 3D video)
  • Signal Type: HDBaseT
  • Connectors: Locking HDMI
  • Video Resolutions:
    • DVI signal VGA (640x480) thru WUXGA (1920x1200)
    • HDTV signal 480i through 1080p
    • Supports 4K@60 Hz (4: 2: 0 8 bit color) or 4K@30 Hz (4: 4: 4 and 8 bit color)
  • Audio Formats: All HDMI Embedded Audio including: LPCM 7.1CH, Dolby TrueHD and DTS-HD Master Audio (32-192kHz sample rate)
  • DDC: Pass-Thru DDC for reading EDID directly from remotely connected LCD and HDCP handshake
  • CEC: Pass-Thru CEC for Consumer Electronics Control compatible devices
  • RS232: Bidirectional (full-duplex) any baud rate up to 115,200
  • PoH: Power-over-HDBaseT meets IEEE 802.3af standard. PD side identifies as Class 2 (3.846.49 watts). Actual power consumption of PD side is 5.5 watts max
  • Power Supply: 100 VAC to 240 VAC, 50-60 Hz, external; 48VDC 1.5A, for internal & PoH
  • Power: Sender: 10.15 watts maximum
  • Storage Temperature: -40 to +158 ˚F (-40 to +70 ˚C) / 10% to 90%, non-condensing
  • Operating Temperature: +32 to +122 ˚F (0 to +50 ˚C) / 10% to 90%, non-condensing
  • Cooling: Convection
  • Mounting: Threaded nuts on bottom for rack-shelf mounting or optional rack ears
  • Enclosure Type: Metal (Aluminum ends, Aluminum Extrusion)
  • Dimensions: 1.66" H x 8.42" W x 5.59" D (42mm H x 214mm W x 141mm D)
  • Product Weight: 2.5 lbs (0.386kg)
  • Shipping: 3 lbs (0.681 kg)
  • Vibration: ISTA 1A in carton (International Safe Transit Association)
  • Safety: CE
  • EMI/EMC: CE, FCC Class A
  • MTBF: 90,000 hours (Calculated Estimate)
Software

Accessories

4K HDMI CABLES
4K HDMI CABLES
Reviews

Similar

Make Offer

Videos

Q/A

Warranty

2-Year
Click Here for Product Warranty
Pictures

Hall Research UHBX-3S HDMI on HDBaseT 1x3 Splitter
Ask a Question

Questions & Answers


Ask a question about the Hall Research UHBX-3S HDMI on HDBaseT 1x3 Splitter or Call 833-WOLFPACK (833-965-3722)

Your email:
Your question:
FAQ

OEM

Hall Research UHBX-3S HDMI on HDBaseT 1x3 Splitter

Scroll Left & Right To See 20 Of Your Recently Viewed Items Below

Customer Reviews
100% Positive Feedback
HDTVSupply.com