DVIGear DVI-23006-HR Cable DVI-D High Resolution 24AWG, 25"
Superior Performance - DVIGear's High Resolution™ (HR™) Series DVI cables are engineered for superior performance, durability, and value. These cables are capable of supporting high resolution DVI and HDMI signals with cable lengths of up to 10 meters (32.8 ft.).
High-Speed Signals - Long distance transport of high resolution DVI and HDMI signals over copper cables must overcome several challenges, such as insertion loss, differential skew and jitter. Insertion loss is caused by cable capacitance, which acts as a low-pass filter, blocking higher frequency signal components from passing. Skew occurs when the differential DVI and HDMI signals get delayed and become out of phase as they pass over a long cable. Both factors contribute to increased digital jitter, which degrades the performance of the cable. This jitter becomes more severe with higher resolutions and longer cable distances. Conventional cables that support lower resolutions at short distances are often unable to support the data rates required by higher resolutions at longer distances. The resulting video can be disrupted by visual artifacts or may not be visible at all.
Advanced Design - Built to overcome these challenges, the HR™ Series DVI Cables are constructed using heavy gauge 24AWG copper wires. This increases the cross-sectional cable area and decreases the capacitance of the cables, which allows signals with higher data rates to pass without noise and minimal jitter. These features make DVIGear HR™ Series copper cables the ideal solution for applications that require a cost effective solution with flawless signal quality.
DVIGear DVI-23006-HR Cable DVI-D High Resolution 24AWG, 25" Features:
Supports HDTV resolutions up to 1080p with 12-bit color
Supports PC resolutions up to 1920x1200 and 2048x1080
Supports HDMI data rates up to 3.4 Gpbs. at lengths up to 5m
Supports HDMI data rates up to 2.25 Gpbs. at lengths up to 10m
Supports PC data rates up to 1.65 Gbps.
Heavy-duty 24AWG copper wires provide minimal insertion loss
Ultra-low Skew guarantees unsurpassed digital fidelity
Triple shielded for superior noise immunity
Dual UL Ratings: UL13 (CL2) and UL758 (AWM20276). These cables are in-wall rated.
Why not buy this DVIGear DVI-23006-HR Cable DVI-D High Resolution 24AWG, 25" today?
DVIGear DVI-23006-HR Cable DVI-D High Resolution 24AWG, 25" Specifications:
24AWG Single-Link DVI-D Cables
Input / Output Connectors
18+1 DVI Male Connectors
19 pins, 30μ Gold Plated, long life design
Gold Flash Plated
DVI 1.0, HDMI 1.3
Maximum Pixel Clock Frequency
165 MHz - up to 10 meters
225 MHz - up to 10 meters
340 MHz - up to 5.0 meters
Maximum Bit Rate (per Channel)
1.65 Gbps - up to 10 meters
2.25 Gbps - up to 10 meters
3.40 Gbps - up to 5.0 meters
Maximum Bit Rate (Aggregate)
4.95 Gbps - up to 10 meters
6.75 Gbps - up to 10 meters
10.2 Gbps - up to 5.0 meters
Supported HDTV Resolutions
1080p / 60 Hz with 8, 10 and 12-bit color
Supported Single-Link PC Resolutions
Up to 2048x1080, 1920x1200
Supported Dual-Link PC Resolutions
Typical Parametric Data
100 ohms ± 5%
Insertion Loss (SDD21)
< 7.5 dB @ 825 MHz with 10 meter cable
< 1.5 nsec (from 250 MHz - 2.5 GHz) with 10 meter cable
< 100 psec (from 250 MHz - 2.5 GHz) with 10 meter cable
Far End Crosstalk (FEXT)
< -5 dB
Available Cable Lengths (meters) (1)
0.2, 0.5, 0.6, 1, 2, 3, 5, 7.5, 10
Available Cable Lengths (ft.) (1)
0.8, 1.6, 2.1, 3.3, 6.6, 9.8, 16.4, 24.6, 32.8
Maximum Cable Length
10 meters (32.8 ft.) (1)
19 Conductor Cable with 4x high speed twisted pairs