This Component Video Over CAT5 / 6 Balun Set is a video/digital audio balun kit consisting of two interchangeable units (a transmitter & receiver) that boosts component video / digital audio transmission distances up to 1000 feet.
Component Video Over CAT5 / 6 Balun Se Features:
Transmits component video & digital audio over cat5e or cat6 cable
Extends transmission distance up to 1,000 from sources at 480i/p
Extends transmission distance up to 500 from sources at 1080i or 720p
Extends transmission distance up to
500 for digital audio
With low-cost CAT-5/5e or CAT-6 cable, users can easily extend component sources from digital set top boxes, DVD players, game consoles, PC and other sources to distant component-enabled televisions.
The transmission distances between the two Component Video Over CAT5 / 6 Balun Sets can be up to 1,000 feet at 480i/p, 500 feet for 720p and 1080i, and 500 feet for digital audio. All transmission distances are measured using Belden CAT-5e cable.
NOTE: We recommend strongly that you use good CAT5 / 6 cables with any CAT5 / 6 converting products like this one. Most of our "no picture" support calls are due to poor quality and cheap or poorly made cables.
Since it is high definition video we only recommend CAT5/6 cables with specs like our CAT-5 /6 cables either bought from us or another high quality supplier. We also recommend, if possible, pre-made cables that are factory tested vs. field made cables due to the advanced testing methods used.
Why not buy a Component Video Over CAT5 / 6 Balun Set today?
Component Video Over CAT5 / 6 Balun Set Specs:
Transmitter In / Receiver Out: 3 Component video RCA jack
1 Digital audio RCA jack
Transmitter Out / Receiver In: 1 8 Position modular RJ-45 jack
Link Distances: 480i/p: 1,000 Feet and 720p/1080i: 500 Feet
Digital Audio: 500 Feet
Video Format: Component RGB video
Impedance: 100 ohms at 1 MHz
Maximum Capacitance: 20pf / foot
Dimensions: 4鎿秞 2鎿爔 1鎿
Contents Include 2 Baluns and 1 Instruction Manual