This is Component to Composite / S-Video Adapter
is designed to convert a variety of HD images, from 480p up to 1080p and converts them to NTSC or PAL standards video and HD images bypass. See the above front and back pictures.
Simply use switch to select the NTSC / PAL output format, the user also can adjust the overscan/underscan from the front panel. It is ideal for using in applications like video conference, home theater, business presentation, lecturing room or viewing HD image on TV.
Component to Composite / S-Video Adapter Features:
- Supports high resolution HD input up to 1080p.
- Supports component (Y-Pb-Pr) input and scales down to Composite video/S-video output or HD component bypass. We suggest the component input resolution to be lowered as scaling down from the high resolution to a composite video/S-video output the resolution will distort during the video processing
- Switch between NTSC/PAL
- Image Overscan/Underscan selection
- Easy to install and simple to operate
- Video only, no audio
This converters chip-set includes a chip to make sure the sound and the picture are in sync and no delays occur between them.NOTE 1:
The Component to Composite / S-Video Adapter also outputs the component signal allowing you to send it to another HDTV or similar device. The Y-Pb-Pr output connector will bypass HD signal & follow the input HD signal.NOTE 2:
We suggest the component input resolution to be lowered as scaling down from the high resolution to a composite video/S-video output the resolution will distort during the video processing.NOTE 3:
This Component to Composite / S-Video Adapter cannot be used in reverse to convert Composite / S-Video to component video.NOTE 4:
When the input source end is not displaying full screen (i.e. letter box / pillbox image) then the output display end may come out with wrong size or position images. Hence, the input source must set on full screen first before powering on the converter.
Why not buy this Component to Composite / S-Video Adapter today?