This 8x8 HDMI to Single CAT5e/6/7 Matrix with POE supports resolutions up to 1080p Full HD and 1920x1200@60Hz with multichannel digital audio from up to eight high definition sources to up to eight CAT5e/6/7 outputs. It supports digital audio formats such as LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio. The matrix can be controlled via IR, RS-232, Telnet or Web GUI.
Power over Ethernet (PoE) support means that compatible receivers do not need their own separate power supplies, allowing for greater flexibility in installations
POE - Power over Ethernet eliminates the excess or unwanted power drain while also providing power to the receivers at the remote location over the CAT5e/6 cable delivering the ultimate freedom to the display or projector from being tethered to an AC outlet.
8x8 HDMI to Single CAT5e/6/7 Matrix Features:
HDMI, HDCP1.1 and DVI compliant
Supports HDMI 3D features
Supports resolutions VGA~WUXGA and 480i~1080p dependent upon the output displays EDID settings
Supports distances up to 100 meters through CAT5e/6/7 cables
Supports 3D signal display dependent upon the output display EDID settings
Supports PoE (Power over Ethernet) on compatible receivers only
Supports HDMI input up to 15 meters at 8-bit resolution or 10 meters at 12-bit resolution
Supports IR in/out from input and output locations
Supports RS-232, remote control and on-panel control
2U size design
Supports external and internal EDID settings
Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission
Note: This system was tested with CAT-6E/23AWG solid cables and the results may vary with cables of a different specification. The PoE function is designed for powering compatible receiver units only, non-PoE receivers will need their own power supply. Receivers of another brand are not be compatible.
Also, 3D content can be displayed when connecting a 3DTV and 3D source. The Matrix allows eight HDMI sources to be independently selected and routed to any of the eight displays, over distances of up to 100 meters along with IR and RS-232 control and PoE features.
Why not buy this 8x8 HDMI to Single CAT5e/6/7 Matrix w/POE today?
8_8 HDMI to Single CAT5e/6/7 Matrix Specifications:
Video Bandwidth 255 MHz/6.75 Gbps
Input Ports 4H4CV:
4_HDMI, 5_IR Extender, 1_RS-
232, 1_LAN, 1_Mini USE Type B (For firmware updated only)
8H8CV: 8_HDMI, 9_IR Extender, 1_RS- 232, 1_LAN, 1_Mini USE Type B (For
firmware updated only)
Output Ports 4H4CV:
4_CAT5e/6/7, 5_IR Blaster
8H8CV: 8_CAT5e/6/7, 9_IR Blaster
ESD Protection Human-body Model:
8kV (Air-gap discharge)
4kV (Contact discharge)
Power Supply 24V/6.25A DC (US/EU standards, CE/ FCC/UL certified)
Q: What type of cable should I use?
A: This system was tested with CAT-6E/23AWG solid cables and the results may vary with cables of a different specification. The PoE function is designed for powering compatible receiver units only, non-PoE receivers will need their own power supply. Receivers of another brand are not be compatible.
HDTV Supply includes a 1 Year Limited Warranty on this Component Over CAT5 Balun. The warranty states that (a) its products will perform substantially in accordance with the accompanying written materials for a period of 1 year from the date of receipt and (b) that the Component Over CAT5 Balun will be free from defects in materials & workmanship under normal use & service for a period of 1 year. In order to get a warranty replacement for a defective Component Over CAT5 balun , HDTV Supplys Support Team will verify the Component Video Balun is eligible for warranty. An RMA number will then be issued. Shipped replacements will be in like new conditions, tested and all components included.
Ask a Question
Questions & Answers
Ask a question about the 8x8 HDMI Matrix Switch over Single CAT5 w/POE or Call 833-WOLFPACK (833-965-3722)
8x8 HDMI Matrix Switch over Single CAT5 w/POE
Scroll Left & Right To See 20 Of Your Recently Viewed Items Below