Avenview CW-PS-HDMSP-100 DC Splitter for Foreseeson Monitors
The Avenview CW-PS-HDMSP-100 DC Splitter is a convenient way to further reduce cords and wires from a video display system. It uses power from the monitor's cord and connects to the W-HDM3D-R-100 HD Receiver (sold separately) thus eliminating the need to provide power from a DC power splitter wall receptacle for the receiver.
NOTE: This product has been discontinued. See the above SIMILAR Tab for equivalent products or, if not there, call us at 800-841-9238 right now to discuss your needs.
There are times in the operating room when finding enough power outlets is an issue. In order to minimize the number of power outlets used by the W-HDM3D-100-SET Wireless Extender Set (sold separately), the DC splitter option can be used in order to draw power from the monitor cable, which can also be used to power the W-HDM3D-R-100 Receiver.
This DC splitter works only with Foreseeson monitors (sold separately) and has been tested to have no effect on the performance of either the monitor or the W-HDM3D-R-100 Receiver.
Avenview CW-PS-HDMSP-100 DC Splitter for Foreseeson Monitors Features:
Mounts easily to a variety of surfaces
Utilizes power from the monitor
Why not buy this Avenview CW-PS-HDMSP-100 DC Splitter for Foreseeson Monitors today?
Avenview CW-PS-HDMSP-100 DC Splitter for Foreseeson Monitors Specifications:
Normal: 15 W
Standby: 10 W
Off: 1 W
Input: Approximately 90 to 240 VAC, 50/60 Hz
Output: 5 VDC, 2 A
Operating: Approximately 32 to 104˚F (0 to 40˚C)
Storage: Approximately -4 to 140˚F (-20 to 60˚C)
Relative Humidity 20 to 90% RH (no condensation)
Dimensions (L x W x H) 6.50 x 3.40 x 2.00" (165.10 x 86.36 x 50.8 mm)