HDTV Supplys WolfPack AHD CVI TVI 1x2 Distribution Amp
distributes a single CVBS signal to two monitors simultaneously, both showing the same picture. The AHD CVI TVI 1x2 Distribution Amp features a built-in amplifier to amplify the signal for cable runs up to 1,500 feet. Our AHD CVI TVI 1x2 Distribution Amp also features a built-in filter for signal processing to eliminate interference and show a perfect picture as if the coax cable distance was only 3 feet.
The AHD CVI TVI 1x2 Distribution Amp is a 2 port HD CCTV video splitter and amplifier supporting AHD, HD-CVI and HD-TVI high definition CCTV video formats. The AHD CVI TVI 1x2 Distribution Amp splits one BNC video input to two BNC video outputs. In an HD video surveillance application, the AHD CVI TVI 1x2 Distribution Amp can be used to share the video signal from an HD CCTV camera (AHD, HD-CVI or HD-TVI) CCTV between two DVRs or monitors.
AHD CVI TVI 1x2 Distribution Amp Features:
- AHD/CVI/TVI input supported resolutions:
- 720p @ 25/30Hz
- 720p @ 50/60Hz
- 1080p @ 25/30Hz
- Supports AHD/CVI/TVI signal transmission distance up to 1,500 feet
- Coaxial cable impedance: 75Ω
- No need to install drivers
- Portable, flexible and plug and play
- Supports ESD protection on all signal pins
- 1 year warranty
HD CCTV is an analog high definition closed-circuit television video surveillance standard that uses coax cablea to transmit HD video from security cameras to DVRs. AHD supports 720p and 1080p HD video resolutions. The AHD CVI TVI 1x2 Distribution Amp also comes with ESD protection with both human body mode or device level but also to address system-level risks.NOTE:
Coax cable distances measured using
Belden 1694A Cables
Why not buy this AHD CVI TVI 1x2 Distribution Amp today?