This 1080p 6X4 Component Video + Analog Audio Matrix Switcher with RS-232
is designed to work as a switcher for multiple Audio/Video sources and displays. It switches any input to any output, or the same input to be routed to all outputs, or any combination.NOTE:
This product has been discontinued. See the above SIMILAR Tab for equivalent products or, if not there, call us at 800-841-9238 right now to discuss your needs.
Because it is a matrix switcher, it allows any input to be routed to any output; or the same input to be routed to all outputs or any combination.
6X4 Component Video + Digital / Analog Audio Matrix Switcher Features:
- Expandable to 6X8 by buying another unit and the above 1-female to 2-male Y-cables (see pic below and above options). Additional cables may be necessary to reach the matrix switcher and its location.
- Switches Component Video (Y-Pb-Pr, Y-Cb-Cr, RGB and and analog right and left audio between multiple sources and displays.
- Supports resolutions 480i, 480p, 576p, 720p, 1080i/60 and 1080p
- 6X4 high speed crosspoint switch matrices
- Buffered inputs
- 4 output amps to drive 100+ foot cables
- Operate via front panel buttons, RS-232 or IR remote control
- Installs in seconds
This 6X4 matrix switcher allows any 4 of the 6 component video and audio inputs to be switched to any of the 4 independent component and audio outputs and is perfect for a bar, restaurant or multi-room home theater system.EXAMPLE:
Watch a DVD in your den while someone else simultaneously watches high definition cable or satellite in the bedroom. Both the DVD player and the high definition receiver are in the den.NOTE:
If you don't need to switch audio see our incredibly priced $500 8X8 Video (only) Matrix Switcher
This 6X4 component video matrix switch is capable of switching component video and right & left stereo audio signals between 6 sources and 4 displays with compatible inputs. A maximum bandwidth of 325MHz will support a sharp and highly defined video in multiple resolutions of up to 1080p. Because it is a matrix switcher, it allows any input to be routed to any output; or the same input to be routed to all outputs or any combination.
It completely eliminates the need to constantly move around video input and output cables. The RS-232 control allows the switcher to be controlled by a computerized system such as HTPC and in this case eliminates the need for an infrared remote control.
Control of this switcher can be managed via its front-panel control, IR remote control, RS-232, or our optional
. RS-232 to Ethernet Converter
. The RS-232 to Ethernet Converter allows control of the unit from anywhere in the world given you know how to write RS-232 code and have the correct serial Ethernet hardware.NOTE:
This component video matrix switch ships in the U.S. by FEDEX regardless of the type of shipping you chose and will ship at the delivery time you chose.
Your video is only as good as the switcher that connects it. Why not buy this 6X4 Component Video + Analog Audio Matrix Switcher today?