The 4x4 HDBaseT Matrix Switch provides built-in EDID management for recognizing multiple display formats and sources. This 4x4 HDBaseT Matrix Switch switches quickly with no flashing as its design is to avoid the flashing, as seen by other HDMI matrix switchers, as it presents EDID which represents all the connected displays. This eliminates the source trying to adjust the resolution dynamically to fit the TVs which limits the flexibility. Setting one of the internal EDID modes can also speed up the switching process with cable or satellite and many other sources.
WolfPack 4x4 HDBaseT Matrix Switch Features:
- HDMI 2.0 version (Support HDMI2.0 4K50/60Hz YUV4:2:0).
- Supports high-definition resolutions 4K@60, 4K@30, 1080P, 1080i, 720P and standard video format.
- Transmit up to 70M under 1080p, 35m under 4K@30Hz.
- HDCP 2.2/1.4 compliant.
- Output Video HDMI2.0 & HDMI 1.4 (over HDBaseT)
- 4 HDMI input ports, 4 HDBaseT output ports.
- Any one of the 4 sources to any one of the 4 Displays.
- With wideband Bi-Direction IR routed control (38~56KHz)
- IR extension from Sender to Receiver or from Receiver to Sender.
- Support Panel Button, IR Routing, RS232 Control, IP Control Via Telnet.
- POE (POC) Receiver powered by HDBaseT Matrix
- U rack design, easy installment.
- Inputs: 4x HDMI (Female Type A)
- Output: 4x HDBaseT (CAT 5e/6)
- 70-Meter Extension over Cat6, with remote receiver before HDTV
- 19-inch rack (1U) mounting
- Super IR & RS232 control system, IR transport channel can be forward or backward per your installation
- Deep color 36/48 bit
- Operating Temperature range: 5 to 131 F
- Operating Humidity range: 5 to 90% RH (Non-Condensing)
The 4x4 HDBaseT Matrix Switch is a true matrix for extending your HDMI signal over long distances to compatible displays. The 4x4 HDBaseT Matrix Switch is used to convert HDMI signal to standard HDBaseT signal and transmit by Internet cable. It also supports Transfer Bidirectional Infrared control signal together with the HDMI signal, so you can control the Source in the Sink side which is 70 meters outside, or you can control the Sink on the Source side which is 70 meters away using.
4x4 HDBaseT Matrix Switch Supported Video Formats:
- 4K
- 1080p
- 1080i
- 720p
- 576p
- 576i
- 480p
- 480i
4x4 HDBaseT Matrix Switch Supported Digital Audio formats
- DTS-HD
- Dolby TrueHD
- LPCM 7.1
- AC3
- DTS
- Direct Stream Digital (DSD)
Why not buy this 4x4 HDBaseT Matrix Switch today?
4x4 HDBaseT Matrix Switch Specs:
- Operating Temperature Range -5 to +35C(-41 to +95C)
- Operating Humidity Range 5 to 90 % RH (no condensation)
- Input Video Signal 0.5-1.0 volts p-p
- Input DDC Signal 5 volts p-p (TTL)
- Signaling Rate 3.0Gbit/s
- Video Format Supported 4K@60/4k@30/1080P/1080i/720P/576P/480P/ 576i/480i
- HDCP Compliant HDCP2.2 and HDCP1.4
- Output Video HDMI2.0 and HDMI 1.4 (over HDBaseT)
- Audio Format Supported DTS-HDDolby trueHD
- Maximum Transmission Distance 1080P 70m, 4K 35m
- Power Consumption 25wtts (Max.)
4x4 HDBaseT Matrix Switch Contents:
- Main unit. (HDBaseT Matrix).
- 12V3A DC Power Supply. x2
- 1x Remote controller.
- 1x IR Extension cable; 4x Wide-Band IR In cables; 4x IR Out cables.
- Operating Instructions.
- 2x Mounting tabs.
Why not buy this 4x4 HDBaseT Matrix Switch today?
DO NOT USE EZ45 CAT6 CONNECTORS WITH HDBaseT PRODUCTS