WolfPack 4K 60 4:4:4 4x4 HDMI Matrix Switch over CAT6 with HDR, ARC, HDMI 2.0b

This HDTV Supplys WolfPack 4K 60 4:4:4 4x4 HDMI Matrix Switch over CAT6 with HDR, ARC, HDMI 2.0b can connect four HDMI sources to eight displays. It features four HDMI outputs, and each HDMI output is mirrored to provide a CAT-Cable output which runs simultaneously. HDBaseT output can extend video transmission distance up to 492ft / 150m via a single Cat 5e/6/7 cable and the resolution is up to 4K2K@60Hz 4:4:4. Audio de-embedded to analog and coaxial audio is supported. Each HDMI output supports 4K2K to 1080P downscaler independently.

The 4K 60 4x4 HDMI Matrix Switch over CAT6 supports IR matrix. The IR signal is one-to-one control at the Matrix end, but the IR signal follows HDMI video channel at the HDBaseT Receiver end. The 4K 60 4x4 HDMI Matrix Switch over CAT6provides an intuitive set of front panel with OLED screen and supports control via front panel buttons, IR remote, RS-232, LAN, and Web GUI.

WolfPack 4K 60 4:4:4 4x4 HDMI Matrix Switch over CAT6 with HDR, ARC, HDMI 2.0b Features:

HDMI 2.0b, HDCP 2.2 and HDCP 1.x compliant
Video resolution up to 4K2K@60Hz (YUV 4:4:4) on all HDMI & HDBaseT ports
4 HDMI inputs, 4 HDMI & HDBaseT mirrored outputs
HDMI ports transmit 18Gbps lossless uncompressed video bandwidth
Support 18Gbps lossless compressed HDBaseT signal transmission
Support 4K->1080P Down Scaler for each output port
HDR, HDR10, HDR10+, Dolby Vision, HLG are supported
HDBaseT output can extend video transmission distance up to 492ft / 150m for 1080P or 394ft / 120m for 4K2K via a single Cat 5e/6/7 cable
HDMI audio pass-through up to 7.1CH HD audio (LPCM, Dolby TrueHD and DTS-HD Master Audio)
Support IR matrix
Audio de-embedded is supported via analog and coax ports
Advanced EDID management and CEC control are supported
24V POC on all HDBaseT ports
1U rack mounted design with front panel OLED display
Control via front panel buttons, IR remote, RS-232, LAN and Web GUI