1X8 VGA Splitter with Audio - 2048 x 1536 resolution to 100M

HDTV Supply

$399.95
Part Number:
HDTVSP840A
Availability:
Contact us for availability
1:
1X8 VGA Splitter with Audio & Built-in VGA Boosters
2:
2048 x 1536 resolution to 100M

This 1X8 VGA Splitter with Audio receives 1-VGA signal input & splits that VGA signal & sends it up to 300 feet to 8 monitors with a video bandwidth exceeding 400MHz.

NOTE: This product has been discontinued. See the above SIMILAR Tab for equivalent products or, if not there, call us at 833-WOLFPACK (833-965-3722) right now to discuss your needs.

1X8 VGA Splitter with Audio Features:

  • Allows one computer to provide simultaneous displays on 8 different monitors
  • Works with VGA, SVGA, XGA, QXGA, UXGA and Multisync monitors
  • High video bandwidth (400 MHz) provides crystal clear 2048 x 1536 resolution
  • Daisy chainable for almost unlimited expansion
  • Built-in video amplifier boosts the signal to allow a cable length of up to 100 meters
  • Uses standard monitor extension cables
  • Compatible with DDC, DDC2 & DDC2B (on Video Out port 1, all other monitors must be able to support the highest
  • video resolution of the DDC-type monitor connected to Video Out 1)
  • Sharpest and clearest VGA of any manufacturer
  • Broadcast real-time VGA video or audio/video to multiple display locations
  • Stereo audio can be broadcast to self-powered stereo speakers at the local unit and each remote location
  • Easily expandable. Add remote units as you add monitors
  • A pure hardware solution-no software conflicts
  • Higher resolutions can be achieved at shorter distances
  • Built-in surge protection
This 1X8 VGA splitter with audio is a Professional Splitter that allow a PC to display on 8 monitors simultaneously. It is perfect for presentations, classrooms, trade shows, or in-store displays where the highest quality video on several monitors is needed.

Why not buy this 1X8 VGA splitter with Audio today?

The 1X8 VGA Splitter with Audio supports monitors with up to 400MHz of bandwidth allowing it to display images of 2048 x 1536 pixels or higher. A built-in booster circuit allows the video signal to be extended up to 100 meters.

1X8 VGA Splitter with Audio specifications:

  • Signal format: RGB (Analog) - HV(TTL)
  • Resolution: Supports 640x480, 800x600, 1024x768, 1280x1024, 1600x1200.
  • Analog bandwidth is 400HZ.
  • Supports 15HDF or 5BNC interface style.
  • Analog level: 1Vp-p
  • Max level: 0.5- 2.0Vp-p
  • Impedance: 75 ohms
  • TTL: 5V
  • Bandwidth: 400MHz
  • Power: DC9V1A or USB power supply
  • One High Density DB15 Male
  • One 3.5mm female stereo audio jack
  • Video Input Frequency Ranges: Horizontal: 15 KHz to 130 KHz and Vertical: 30 Hz to 150 Hz
  • Audio Frequency Response: 20 Hz to 20 kHz, +/- 1 dB at an Input Impedance of 75 Ohms
  • Audio Input Impedance: 10k Ohms
  • One High Density DB15 Female

1X8 VGA Splitter with Audio Contents:

  • 1x8 VGA Video splitter with audio
  • Power adapter
  • VGA cable - 1.5m long
  • USB cable
  • User Manual
The 1X8 VGA Splitter with Audio can be daisy-chained for future expansion and are compatible with a wide range of monitors.

Why not buy this 1X8 VGA splitter with Audio today?

This 1X8 VGA Splitter with Audio will work with the below with the appropriate VGA outputs:

  1. Any PC that conforms to the resolution in the specs of this VGA device
  2. Any "Over The Air" (OTA) high definition receiver with VGA outputs
  3. Any high definition Dish Network and DirecTV receiver with VGA outputs
  4. High definition TiVo's with VGA outputs
  5. Any high definition cable receiver with VGA outputs
  6. and other similar devices with VGA outputs.