HDTV Supplys 1x8 HDMI Splitter Over CAT5/6 sends both an HDMI audio and a 1080p HDMI video signal from one location to 8 other remote locations with standard, inexpensive and reliable CAT5e or CAT6 cables to upwards of 150 feet. The 1x8 HDMI Splitter Over CAT5/6 can use either one cables per TV. If connected with one cable it requires the supplied AC power supply be used per output port. All the power supplies needed are included in the package.
1x8 HDMI Splitter Over CAT5/6 Features:
Sends a single HDMI input signal and splits it to 8 outputs for 8-supplied HDMI receivers
150 feet over CAT5e/6 extension
CEC pass through
HDCP 2.0 compliant
Deep Color 36-bit/48-bit, Full HD 1080P/120Hz
DTS/Dolby/DTS-HD/Dolby True HD/LPCM7.1/AC3
DC power 5V
HDCP 1.3 compliant
Supports default EDID and has ability to learn the EDID of displays
Supports xvYCC, x.v.Color & Deep Color
Easy to install, just plug it in and start using it right away!
Extends High Speed 1080p HDMI signals up to 150 feet
Uses just a single Cat5e/6 cable for each extension
Supports 165 MHz/1.65 Gbps per channel (4.95 Gbps all channel) bandwidth
Supports 8-bit per channel (24-bit all channel) deep color
Supports uncompressed audio such as LPCM
Supports HDCP and EDID pass-through
165 MHz/1.65 Gbps bandwidth
Supports 8-bits per channel (24-bits total) Deep Color
No setup required, just plug it in and go
Why not buy this 1x8 HDMI Splitter Over CAT5/6 today?
The 1x8 HDMI Splitter Over CAT5/6 supports up to 1080p resolutions and digital audio, including DTS Digital, DTS-HD Master Audio, and Dolby TrueHD. It also supports up to 8-bits per channel (24-bit total) Deep Color and HDCP pass-through.
HDTV Supply is a leader in supplying 3D equipment for this new, fast growing 3DTV market. Our test lab includes the latest equipment for designing, testing and supporting 3D video equipment. The chips sets we use support the below 3D formats and work with many of our HDMI 1.3 and HDMI 1.4 compliant devices. This 1x8 HDMI Extender with IR supports these 3D formats:
Side-by-Side 3D Format
Top-and-Bottom 3D Format
Blu-ray 3D Format
We not only test this HDMI over a single CAT5/6 Cable with lab equipment we also test many of our 3D devices with 3D products you are likely to use. The products used for the test are:
CAT6 solid 23 gauge un-shielded cables
Sony PS3 with the 3D 3.41 firmware
Samsung model PN50C7000YF 3DTV
Samsung model BD-C6900 3D Blu-ray player FORCED to 1080p
Samsung model SSG-P2100T 3D glasses
DirecTV models HR21-100 and the HR24 high definition receiver.
HDTV Supply's true HDMI 2.0 cables
It works with all HDMI devices including the new 3D units.
The 3D viewing results were awesome in our lab and did not have any picture or audio degradation. The normal and standard (2D) results equally exhibited a superb picture quality.
Why not buy this 1x8 HDMI Splitter Over CAT5/6 w/Bidirectional IR today?
HDTV Supply includes a 1 Year Limited Warranty on this 1x8 HDMI Splitter Over CAT5/6. The warranty states that (a) its products ( will perform substantially in accordance with the accompanying written materials for a period of 1 year from the date of receipt and (b) that the Product will be free from defects in materials & workmanship under normal use & service for a period of 1 year. In order to get a warranty replacement for a defective item, HDTV Supplys Support Team will verify the product is eligible for warranty. An RMA number will then be issued. Shipped replacements will be in like new conditions, tested and all components included.
HDTV Supply also sells a 3 and 5 Year Extended Warranty for this HDMI HDBaseT Extender with POE. Please go to Extended Warranties or see the above Options to purchase it.
Why not buy this 1x8 HDMI Extender with IR today?
Ask a Question
Questions & Answers
Ask a question about the 1x8 HDMI Splitter Over CAT5/6 to 150 feet or Call 833-WOLFPACK (833-965-3722)