WolfPack™ 4K 30 Hz 1x13 AV over IP Splitter

WolfPack

$700.00
Part Number:
1x3-HDBIT
UPC:
796168568420
Availability:
Contact us for availability
1:
WolfPack™ 4K 30 Hz 1x13 AV over IP Splitter
2:
iOS & Android App & PC Control
3:
Sends & Receives 4K UHD HDMI up to 400'
4:
Remote IR controls Sources from TVs

WolfPack HDMI splittersers HDTV Supplys WolfPack™ 4K 30 Hz 1x13 AV over IP Splitter is a simple to install preconfigured HDMI Splitter splitters over IP. This HDbitT HDMI video Splitter over IP allows for the distribution and splittersing of high definition 4K video & audio signals using off-the-shelf Gigabit IGMP splitterses. The 1x3 HDbitT HDMI video Splitter uses advanced HDbitT technology supporting a video resolution up to 4Kx2K@30Hz Ultra HD. Configure any-size HDMI splitters using HDMI over IP with only the number of ports available on the Ethernet LAN splitters (above) limiting the ins & outs of your design. Multiple receivers can simultaneously connect to many transmitters to form a virtual Splitter of multiple HDMI inputs with up to 65,000 HDMI receivers (TVs).

This HDMI Over Network Send & Receive Adapter taps into the benefits of Ethernet standards to overcome the inherent limitations of TMDS. The HDMI Over Network Adapter allows reliable cable runs up to 120m with easy splitting and distribution of HDMI audio and video signals with perfect signal integrity. The Ethernet splitters must have an IGMP function and we use the TP-LINK TL-SL3428. Other splitterses also may be used if they conform to a IGMP function

This HDMI Over Network Adapter is compliant with HDCP 1.4 specifications, supports copy protection with 128-bit AES encryption and overcomes traditional key verification limitations enabling very large system sizes while maintaining full HDCP compliance. And unlike first-generation Megabit implementations of IP technology, this HDMI Over Network Adapter means picture quality that is virtually indistinguishable from the source & suitable for the most discerning viewer.

WolfPack™ 4K 30 Hz 1x13 AV over IP Splitter is pre-configured with:

  • 1 - 4K HDMI to LAN Transmitters
  • 3 - 4K LAN to HDMI Receivers
  • 1 - Companion 8 port Ethernet splitters
  • 1 - iOS / Android controller

What sets this WolfPack™ 4K 30 Hz 1x13 AV over IP Splitter apart from others:

  • Supports IR pass back function to control the source devices from the receivers location.
  • Zero Latency & splittersing Times
  • Can send and receive HDMI audio and video up to 300 feet
  • 4K/30 UHD Compliancy

HDMI Over Network Transmitter & Receiver Features:

  • Plug and play.
  • Apply advanced HDbitT over IP technology.
  • Transmission distance is up to 120 meters or 400 feet via CAT6.
  • Resolution supported is up to 4K@30Hz ultra HD.
  • Supports scalable and flexible input and output Splitter configurations allowing 100 inputs to an infinite output.
  • Supports select and splitters source device input from the receiver via hard button
  • Supports IR pass back function to control the source device from the receiver location.
  • HDMI signal extension up to 100 meters or 330 feet.
  • Supports L/R stereo audio.
  • Supports one-to-one, one-to-many and many to many connections via managed splitters.
  • Supports up to theoretically 65,000 receivers.
  • IR pass-through.
  • Compliant with HDMI 1.4 and HDCP 1.4 standards.
  • Audio and video are transmitted digitally over an 100 Ohm CAT6 cable for lower signal loss.
  • TV will show display source channel, which is easier for end user to control.

8-Port HDMI Over Network Managed Ethernet splitters Features:

  • 10/100Mbps Ports Managed splitters
  • Advanced standards-based enterprise features: IEEE 802.1d, 802.1x, 802.1Q, 802.1p, IGMP Snooping, SNMP and more
  • SNMP, Web-based, Telnet, Console management

Why not buy this 1x3 HDMI Splitter Over LAN today?

HDbitT HDMI Video Splitter over IP Specification (Per TX or RX):

  • HDMI signal: HDMI1.4 and HDCP compliant
  • Network bandwidth: 28Mbps
  • HDMI input resolution supported: 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz, 4Kx2K @24/25/30Hz
  • Audio format supported: L/R stereo audio
  • TMDS signal: 0.7~1.2Vp-p
  • DDC signal: 5Vp-p
  • IR passback: Supports 20~60KHz IR devices
  • APP control: Support APP control, user can scan, preview, build up their configuration by using a phone/tablet easily, OS system supports IOS and Android
  • Splitter configuration: Up to 100 source signals can be connected and splittersed to infinite outputs
  • Voltage/Current: 5V/2A
  • Power consumption: TX≤6W;RX≤5W
  • Weight: TX: 320g;RX: 310g
  • Dimensions(LxWxH): 164x107.6x23.6mm
  • Working temperature: 0~60˚C
  • Storage temperature: -20~70˚C
  • Humidity: 0~95%(no condensation)
  • Color: Black

Why not buy this 4K 1x3 HDMI Splitter Over LAN with iPad App today?

User Manual

Don't use EZ45 Connectors

CAT6 Installation Tips (Don't Use Patch Panels)

Why not buy this 4K 1x3 HDMI Splitter Over LAN with iPad App today?

The Ethernet splitters must have an IGMP function and we use the TP-LINK TL-SL3428. Other splitterses also may be used if they conform to a IGMP function

Why not buy this 4K 1x3 HDMI Splitter Over LAN with iPad App today?