This 16x16 Component + 14 Audio Matrix Router Over CAT5
is made up of one of our Colorado 16x16 matrix switcher and uses the 14-optical and coax ins and outs to 14-component video plus coax audio baluns and then at the TV an adapter that converts digital audio to analog to go into the widescreen.NOTE:
Due to the popularity of this matrix switch we are sold out for a month or so. Please call us right now at 800-841-9238 with your needs as we have dozens of other matrix systems in stock to ship today. For our replacement see our WolfPack 12x16 Component Video Matrix Switch over CAT6
It has the above optional iPhone/iPad ap if you want to control via iOS as an alternate to the front panel control or the RS232 port or via any remote control (not supplied).
16x16 Component + Audio Matrix Router Over CAT5 Features:
1 - 16x16 Component + Audio Matrix Router Over CAT5
- This 16x16 Component + Audio Matrix Router Over CAT5
allows any input to be sent to any output or the same input to be routed to all outputs or any combination. It also includes 8 coaxial & 6 optical digital audio signals which can be independently controlled.
16 sets - Companion CAT5 balun set w/cables
- This Component Video Balun with coax Audio is for extending component video & digital audio using only one CAT5/6 cable to 300 feet. The converters chip-set includes a chip to makes sure the sound & the picture are in sync & no delays occur between them. The coax wire on 2-baluns will not be used, just the component video.
14 - Coax Audio to RCA Audio Converters
that takes the digital output from the above baluns & converts it to analog audio for your widescreens.NOTE:
The source devices, like a DirecTV receiver, that supplies the audio to the matrix MUST HAVE
both optical and coax audio outputs otherwise you will need multiple RCA Coaxial to Toslink Audio Optical Converter
or Optical Toslink Audio to Coaxial Converters
. Call us at 800-841-9238 if you don't understand.
Why not buy this 16x16 Component + Audio Matrix Router Over CAT5 today?