16x40 HDMI Matrix Switcher over CAT6 & WEB GUI Control

WolfPackLite

Call for Information

Part Number:
HDTVEMIX16x40CAT6-FOL
UPC:
728370345902
Availability:
Usually ships in 5-7 business days
1:
16x40 HDMI Matrix Switch over CAT6
2:
HDCP 1.4 Compliant on all Ins & Outs
3:
RS-232, IR, Software & Front Control
4:
Uses a 40x40 Modular Card Cage (9U)
5:
WEB GUI Control & Free Shipping

WolfPack HDMI Switcher HDTV Supplys WolfPackLite 16x40 HDMI Matrix Switcher over CAT6 switches both audio and video signals. Because it is a matrix switcher, it allows any input to be routed to any output; or the same input to be routed to all outputs, or any combination. The WolfPackLite 16x40 HDMI Matrix Switch is designed to allow the switching and distribution of 16 HDMI inputs to 40 HDMI outputs. Control of the matrix is via a WEB GUI from any browser, RS-232, IR, Software & front buttons. The matrix is housed in a 40x40 modular matrix card cage.

The WolfPackLite 16x40 HDMI Matrix Switcher over CAT6 is a top of the line digital matrix switcher made for the demands of today's HDMI (High-Definition Multimedia Interface) routing. Created to route your systems HDMI signals to go to 40-outputs from16-inputs, this 16x40 HDMI Matrix Switch delivers high performance.

Streaming between the source and display units is easily controlled through our HDMI 16x40 Matrix interface. HDCP key authentication will no longer be an issue when using our switcher. Control for our unit is varied and easily accessible. You can use our enabled RS-232 commands for advanced user control management as well the front-end panel display and the remote control that comes with it.

The Card Cage chassis has 10 - input slots and 10 - output slots. The HDMI input and HDMI output cards are 4 - port HDMI cards having 4 - HDMI connectors on each card. If one populates the complete chassis it configures to a 40x40 HDMI Switcher. Shown below is the configuration for this 16x40 HDMI Matrix Switcher over CAT6.

Reasons that sets our WolfPackLite 16x40 HDMI Matrix Switcher over CAT6 apart from others:

  1. 1080p compatible
  2. WEB GUI control
  3. Free Shipping
  4. HDMI 1.4 and HDCP 1.4 compliant
  5. 16 - Preset scenes that can be Saved and Recalled
  6. Closed Caption (CC) Pass-through
  7. Control via an remote control, RS232 & Front Buttons
  8. Free Lifetime Telephone, CHAT, TEXT and Email Tech Support
  9. 9U Height Case

WolfPackLite 16x40 HDMI Matrix Switch Configuration:

  • 1 - 10-4K 4 Port card in and 10 - 4 Port card out card cage chassis (40x40) (9U)
  • 4 - 4 - port HDMI input cards = 16 HDMI inputs
  • 10 - 4 - port HDMI output cards = 40 HDMI outputs
  • 40 - Separate HDMI over CAT6/6 baluns (Both TX & RX) & 40-AC Adapters on Transmitters

WolfPackLite 16x40 HDMI Matrix Switcher over CAT6 Features:

  • Supports 1080p & downward compatible
  • Switching of up to 16 HDMI sources to 40 displays
  • Built-in HDCP 1.4 internal management
  • 16 - Presets to save for often used configurations
  • Supports High Speed HDMI 1.4 Specifications (Deep Color, Lip Sync, and HD lossless audio formats)
  • Supports DDC transmission
  • Supports Dolby Digital-true HD, DTS-HD
  • Control via an RS-232, IR, WEB GUI, Software & front buttons
  • Full RS-232 control-perfect for incorporating third party control systems

The WolfPackLite 16x40 HDMI Matrix Router provides full HDCP internal management for todays integration in the commercial A/V market, ensuring HDCP key authentication and administering the handshake internally. Our WolfPackLite 16x40 HDMI Matrix Router comes with a full HDCP (High-bandwidth Digital Content Protection) internal management system that will eradicate any interception of your digital data.

Why not buy this WolfPackLite 16x40 HDMI Matrix Switcher over CAT6 today?

WolfPackLite 16x40 HDMI Matrix Switcher over CAT6 Specs:

  • Fast Switching Circuitry
  • Gain: 0 dB
  • Bandwidth: 340 MHz (10.2 Gbit/s)
  • Video Signal: HDMI (or DVI-D)
  • Maximum Pixel Clock: 165MHz
  • Resolution Range: Up to 4K/30 4:2:0 chroma

WolfPackLite 16x40 HDMI Matrix Switcher over CAT6 Input:

  • Input: 16 HDMI
  • Input Connector: HDMI 1.4
  • Input Level: T.M.D.S. 2.9V/3.3V
  • Input Impedance: 75Ω
  • Output Impedance: 75Ω

WolfPackLite 16x40 HDMI Matrix Switcher over CAT6 Output:

  • Output: 40 HDMI
  • Output Connector: HDMI 1.4
  • Output Level T.M.D.S. 2.9V/3.3V

Other WolfPackLite 16x40 HDMI Matrix Switcher over CAT6 Specs:

  • Input cable distance: ~25 feet AWG24 HDMI 1.4 high speed cable
  • HDCP Management: Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI 1.4 standards. The built-in HDCP management technology can analyze HDCP key authentication and realize handshake internally.
  • 2-Serial Control Ports: RS-232, 9-pin female D connector with a pin configuration of 2 = TX, 3 = RX, 5 = GND
  • IR Remote: Yes
  • Front Panel Control: LCD Display
  • Power Supply: 100VAC ~ 240VAC, 50/60Hz

Why not buy this 16x40 HDMI Matrix Switcher over CAT6 today?

Frequently
Reasons To Buy an HDTV Supply WolfPack Product

Why not buy this WolfPackLite 16x40 HDMI Matrix Switcher over CAT6 today?

User Manual and Software

Why not buy this WolfPackLite 16x40 HDMI Matrix Switcher over CAT6 today?

HDTV Supply has successfully installed our WolfPack, WolfPackLite and our other HDMI Matrix Switchers in Sports Bars, Restaurants, Bowling Alleys, Fitness Centers, Malls, Places of Worship, Data Centers, Gaming Rooms, Nail Salons, County Clubs, Casinos, Factories, Conference Rooms, Schools, Home Theaters or many other installations requiring HDMI matrix switching. The reason, we are told by the users, is the number of features we offer compared to other companies they looked at.

These modular HDMI matrix switcher can usually be integrated with many third party control systems using the RS232 port on the back of the matrix.

For experienced hardware & software professionals who want to write their own drivers for 3rd party control systems from:

  • AMX™
  • Control4™
  • Creston™
  • RTI™
  • DTVGameControl™
  • Elan g!™
  • Media switcher™
  • OnControls™
  • Savant™
  • SimpleControl™
  • SwitchItUp™
  • SAVI Control™
  • URC Control™

...we have created a simple and very easy to use RS232 script to write your own drivers.

EXAMPLE: If you want to switch input 8 to outputs 1, 8, 16, the RS232 commands would be command would be

  • Input 8 to output 1: PH00WS0801NT
  • Input 8 to output 8: PH00WS0808NT
  • Input 8 to output 16: PH00WS0816NT

How to use the info:

END USER: If you are an end user and want to have a whole-house control system from any of the above 3rd party control houses but your budget can't support the price you were quoted, do the following:

  1. Call us for a quote
  2. Once you get our quote call a 3rd party control reseller or installer in your area and tell them "Here is the hardware I want to use, please give me a quote on writing the software and installing all of the hardware at my location." You usually can save $1,000s on larger systems.

CAVEAT: We are not certified by any of the above 3rd party control systems companies nor have the necessary hardware to verify, troubleshoot and support the 3rd party writing of the code. We do warranty, though, that the RS232 script in the above RS232 Users Manual has and will work to control the matrix directly.

Why not buy this WolfPackLite 16x40 HDMI Matrix Switcher over CAT6 today?

HDTV Supply's WolfPack Family of Matrix Switchers can be created however you wish. Just SCROLL DOWN and fill out the below and press SUBMIT and we will send you a quotation based upon your needs within an hour.

If it doesn't meet your needs just call us right now at 833-WOLFPACK or 833-965-3722 or email us at support@hdtvsupply.com

For Questionnaire Click Here