This 1X2 VGA Splitter over CAT6 Extender with Audio and VGA Pass-through is an ideal device for local displaying and remote viewing to monitors with a VGA input. The two CAT-5 to VGA receivers and their AC adapters are included that install at the TV end. A picture showing the front and back of the 3-devcies is shown above and a system diagram is in the above PICTURES Tab.

1X2 VGA Splitter over CAT6 Extender Features:

Extend VGA video and stereo audio signal max up to 300m over one UTP CAT6/7 cable
GAIN and PEAK adjustments to adapt for the different length of UTP cable.
GAIN: Brightness adjustment.
PEAK: Skew adjustment.
Dual output at local unit: 1 x VGA output for local site, plus 2 x UTP output for remote site.
Work with monitors, projectors, HDTV, and flat panels

Supported resolutions:

640X480
800X600
1024X768
1280X720
1280X768
1280X960
1280X1024
1600X900
1600X1200
1920X1080
1920X1200

This 1X2 VGA Splitter over CAT6 Extender combines a split function and extension function. It distributes the input of the VGA signal and audio signal into the two identical outputs simultaneously. Two Receivers by CAT6 x1 receive the distributed signal from the sender and transmit to displays individually. The receivers are furnished.

NOTE 1: The two CAT-5 to VGA receivers and their AC adapters are included that install at the TV end. Each receiver works with the Sender as a full functional module. Only by the most inexpensive CAT-5e/6 cable the full functional module extends the VGA display max up to 300 meters. The 1X2 VGA Splitter over CAT6 Extender offer solutions for VGA retail and show site and Projector factory, noise space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.

NOTE 2: We recommend strongly that you use good CAT6 / 6 cables with any CAT6 / 6 converting products like this one. Most of our "no picture" support calls are due to poor quality and cheap or poorly made cables. Since it is high definition video we only recommend CAT6/6 cables with specs like our CAT-5 /6 cables either bought from us or another high quality supplier. We also recommend, if possible, pre-made cables that are factory tested vs. field made cables due to the advanced testing methods used.

Why not buy this 1X2 VGA Splitter over CAT6 Extender today?

The 1x2 VGA extender over CAT6/7 cable is designed for routing two high-resolution VGA signals and stereo audio over remote distances up to 1,000ft. (300m). Each receiver set features a separate gain and peaking rotary switch used in adjusting brightness and skew over long distances. The 15-pin HD connectors are convenient and cost-effective for all input/ output connections supporting full bandwidth compatible from VGA to WUXGA graphics card resolutions and HDTV????????? projectors. In addition, each output performs a separate buffering to maintain signal integrity and reject noise interference.