C2-7260 2-Channel 17-Input Video Processor moves well beyond video processing, switching and HD-SDI Up, Down and Cross Convers ion by providing many additional features. Two independent video processing and scaling engines and two video mixers provide maximum flexibility in handling SD-SDI, HD-SDI, Composite Video, YC (S-Video), YUV Component, YPbPr Component, DVI and RGB. At home in both broadcast and presentation environments, the C2-7260 is multiple products in one.
NOTE: This product has been discontinued. See the above SIMILAR Tab for equivalent products or, if not there, call us at 800-841-9238 right now to discuss your needs.Three operating modes simplify control:
Switcher Mode - Equally powerful Program and Preview channels allow any function (Next Image, PIP, Keying, Logo, etc.) to be set up and previewed, totally independent of the Program output. Transition from Preview to Program is by Cut, Dissolve or Special Effect.
Independent Mode - Provides all the power of two completely independent scalers in one box, each with a full range of features, including PIP, Keying, etc. Each output can deliver different formats and resolutions simultaneously. For example, a presentation being fed to a high resolution display on Output 1 via DVI can be fed to a VCR for recording on Output 2 via Composite Video. Two projectors may be edge blended from one unit.
Dual PIP Mode - Any video input can be squeezed and placed into either of two windows of any size and positioned anywhere on the screen, even overlapping, with user defined layer priority control. The windows can be placed over any other video input as the background. The window age can then be seamlessly switched, faded or zoomed. Keying can be independently applied to each window.
Powerful Features - The 4:4:4 sampling provides full bandwidth color which allows precise keying, including Transparent (Soft) Keys. The 17 video inputs can accommodate signals (either analog or digital, video or computer) in a variety of formats and resolutions. It handles most HDTV and RGB resolutions and formats and new resolutions can be easily added. Each of the two independent outputs delivers a wide range of digital and analog video signals.
n addition to SD and HD television formats, the C2-7260 output signal format flexibility assures that the Native Resolution of most digital displays can be matched. Using the software based resolution calculator, new or unusual resolutions can be instantly added to the menu. Signal parameter adjustments can be made for each video input and are stored in individual non-volatile memories. Integral Test Signals are user defined. A logo memory is provided, so the unit can easily be used as a Logo Inserter. Motion compensation, diagonal interpolation and a 3:2 Pulldown feature for NTSC greatly improve the image quality. Pixel Level Motion Adaptive Diagonal Interpolation insures high quality de-interlacing of PAL and NTSC signals
17 Input Seamless Switcher: 3xDVI-I (RGB/YPbPr/YUV), 3xCV, 3xYC, 8xSD/HD-SDI Features:
- Analog to HD-SDI Up, Down, Cross Conversion
- SD-SDI to HD-SDI Cross Conversion
- Dual Independent Scaling Engines
- Delay Free Audio Pass-thru for Lock Source SDI
- 4:4:4 Sampling for full bandwidth color
- 17 (or 11) Multi-format Inputs: 3x CV, 3x YC, 3x DVI-I (RGB, YUV & YPbPr) , 8x SD/HD-SDI (2x on C2-7210 and C2-7200)
- 2 Independent Output Channels, each with: SD/HD-SDI, Composite Video, YC (S-Video), DVI-I (RGB, YUV & YPbPr)
- Analog RGB to 2048x2048, HD to 1080p
- DVI to 1280x1024/60, HD to 1080p/30
- Genlock any Video Input to any other
- Seamless Switching with Cuts, Fades or Effects
- Pixel Level Motion Adaptive Diagonal Interpolation
- Unrestricted Dual PIP - Any Input over any other
- Multiple Layering and Windowing Capability
- Flexible Key Layering - Background Lock Source can be moved to the Foreground
- RS-232 & IP Interfaces, CORIOtools Suite & WCP
- External Control by Third Party Control Systems
- External Hardware Control by Optional CC-300
- CORIO2_Technology Conversion Engines
- Zoom up to 1000% with full Positioning
- Image Shrink to 10% with full Positioning
- Multiple Conversion & Scaling products in one
Why not buy this 17 Input Seamless Switcher: 3xDVI-I (RGB/YPbPr/YUV), 3xCV, 3xYC, 8xSD/HD-SDI today?
17 Input Seamless Switcher: 3xDVI-I (RGB/YPbPr/YUV), 3xCV, 3xYC, 8xSD/HD-SDI Specifications
- Video Inputs
- Composite Video: 3x via BNC Connector
- YC (S-Video): 3x via 4-PIN Mini-DIN Connector
- DVI-I (Note 1): 3x via DVI-I Connector
- SD-SDI or HD-SDI: 8x via BNC on C2-7260 (Note 2) 2x via BNC on C2-7210, C2-7200
- Reference Signal: Genlock to any of the Video Inputs
- Independent Output 1
- Composite Video: 1x via BNC Connector
- YC (S-Video): 1x via 4-PIN Mini-DIN Connector
- DVI-I (Note 1): 1x via DVI Connector
- SD-SDI or HD-SDI: 1x via BNC
- Independent Output 2
- Composite Video: 1x via BNC Connector
- YC (S-Video): 1x via 4-PIN Mini-DIN Connector
- DVI-I (Note 1): 1x via DVI Connector
- SD-SDI or HD-SDI: 1x via BNC
- Input/Output Range
- Computer Resolutions Analog: Up to 2048x2048
- DVI: Up to 1280x1024@30Hz
- Max Vert Refresh Rate: 250Hz
- Max Horiz Frequency: 150KHz
- HDTV Resolutions Analog: Up to 1280x1024@60Hz ,li>DVI: Up to 1080p @30Hz
- Interlace Support: Progressive and Interlaced
- Television Standards: NTSC 3.58, 4.43, PAL-B,G,I ,D, H, PAL-M, PAL-N. SECAM (In Only)
- SDI: SD-SDI or HD-SDI
- General
- Image Size & Position: AutoSet or Manual
- Image Zoom Range: Continuous to 1000%
- Image Shrink Range: Continuous to 10%
- Image Mirroring: Horizontal and/or Vertical
- Image Freeze: Full Frame
- Video Sampling Rate: 108MHz
- Resolution Memory Approximately 1,000 Definable
- Firmware Memory: Flash, Upgradeable via RS-232
- Flicker Filter: 4-Level Vertical
- Picture-in-Picture: 2 Windows + Background from any 3 Video Inputs
- Number PIP Windows: 2 in Dual PIP Mode 1 in Switcher & Ind. Modes
- Video I/O Impedance: 75
- Video Decoder: 9-bit Digital
- Comb Filter Decoding: Adaptive
- De-Interlacing (PAL-NTSC): Pixel-level Motion Adaptive Diagonal Interpolation
- Film Mode (NTSC): 3:2 Pull Down Detection
- Video Encoder: 10-bit Digital
- Digital Sampling: 24-bit, 8-bits per R, G and B
- Colors: 16.7 Million
- Video Scaling Engine: Proprietary CORIO2
- Internal Format: 4:4:4 YUV
- Internal Test Patterns: User Defined
- LCD Panel: 24x2 Character
- Logo Inserter: Flash Programmable
- Proc Amp Adjustments: Brightness, Contrast, Saturation, & Hue for CV & SV Inputs, plus Video Level for RGB Input
- Proc Amp Memory: Settings for each Video Input
- Input RGB Sync
- Type: Auto-detectRGBHV, RGBS, RGsB
- Level/Impedance: TTL, 10K
- Polarity: Positive or Negative
- Maximum Level: 5Vp-p
- Output RGB Sync
- Type: RGBHV, RBGS
- Level/Impedance: 5Vp-p, 220
- Polarity: Positive or Negative
- Input/Output YPbPr Sync
- Type: Tri-level
- SDI Jitter
- SMPTE259M-C: (270Mbps: 525/625 Line) Jitter 0.070 +/-0.01 UI
- SMPTE292M: (1.485/1.4835Gpbs: 720p, 1035i, 1080i,1080p) Jitter 0.176 +/-0.02 UI
- SD-SDI I/O Vertical Rates - SMPTE259M-C
- 525i (720x488): 59.94Hz
- 625i (720x576): 50 Hz
- HD-SDI I/O Vertical Rates - SMPTE292M
- 720p (1280x720) 23.98, 24, 25, 29.97, 30, 50, 59.94, 60Hz
- 1035i (1920x1035) 59.94, 60Hz
- 1080i (1920x1080) 50, 59.94, 60Hz
- 1080p (1920x1080) 23.98, 24, 25, 29.97, 30Hz
- Control Methods
- Front Panel (7260,7210): 48 Button +LED and LCD
- Front Panel (7200): 20 Button +LED and LCD
- RS-232 Interface: DB-9 Male Connector
- IP Interface: RJ45 Connector
- Mechanical
- Desktop Case (HWD): 44x420x200mm (1.75,17,7.9 )
- With Rack Ears (HWD): 44x482x200mm (1.75,19,7.9 )
- Weight (Net): C2-7260 3.4 kg (7.48 lbs) C2-7210, C2-7200 3.16 kg (6.95 lbs)
- Warranty
- Limited Warranty: 5 Years Parts and Labor
- Environmental
- Operating Temperature: 0o +50 (+32o +122)
- Operating Humidity: 10% to 85%, Non-condensing
- Storage Temperature: -10o +70 (+14o +158)
- Storage Humidity: 10% to 85%, Non-condensing
- Power Requirement
- Internal Power Supply: 100-240VAC, 47-63Hz, 50W
- Regulatory Approvals
- Video Scaler Unit: FCC, CE, RoHS
- Power Supplies: UL, CUL, CE, PSE, GS, RoHS
- Product Item Numbers
- C2-7260: Version with 8 HD/SD-SDI Inputs
- C2-7210: Version with 2 HD/SD-SDI Inputs
- C2-7200: As above, but with 20 button panel
- Accessories Included
- 1x AC Power Cord: 6 (2m) US, UK, Euro or AU
- 2x VGA to DVI Adapters: HD-15 Female to DVI-I
- 1x Operations Manual
- 1x Rackmount Kit: 2 Ears and 4 Screws
- 1x Control Software: Downloadable from website
- Optional Accessories
- CC-300: CORIOconsole
- A2-2000: Audio Switcher
- Note:
- DVI-I Input/Output connectors also accommodate RGsB, RGHV, YUV & YPbPr signal formats
- Only 2 of the 8 SD/HD-SDI sources may be used at the same time. For example, in the Dual PIP Mode, if 2 SDI sources are used for the windows, the image for the background cannot be another HD-SDI source.
