Intelix INT-HDX100-TX HDMI Slim 100M, POH, IR and Control HDBaseT Extender - Transmitter extends HDMI over a single solid core shielded Category 5e or greater cable using the Valens VS100TX HDBaseT chip. The INT-HDX100-TX supports 1080p, full 3D or 4k x 2k video signals up to 100 meters (328 feet) including multichannel audio and HDCP 1.4/2.2. Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. Key features of the new extender series include , power over HDBaseT (PoH), bidirectional IR, bidirectional RS232, and Ethernet pass-through with a 2-port network switch.
Flexible power design allows the INT-HDX100 series extenders to be powered at either the TX or RX end, and only one power supply is required. The power supply is included with the extender. The bidirectional wideband IR, bidirectional RS232, and Ethernet pass-through capabilities make the INT-HDX100 compatible with most control systems. The IR emitter (DIGIB-EMT) and IR receiver (DIGIB-EYE) are sold separately. The two-port network switch on the INT-HDX100-TX allows a second device to share the 100BaseT Ethernet pass-through connection without adding additional hardware to the installation.
The INT-HDX100 series extenders are compatible with all Intelix HDBaseT product offerings and any product that meets the HDBaseT specifications.
Intelix INT-HDX100-TX HDMI Slim 100M, POH, IR and Control HDBaseT Extender - Transmitter Features:
- Extends HDMI over a single solid core shielded Category 5e or greater cable using the Valens VS100TX HDBaseT chip
- Supports 1080p, full 3D or 4k x 2k video signals up to 100 meters (328 feet) including multichannel audio and HDCP 1.4/2.2
- Built-in surge protection and diagnostic LEDs
- Power over HDBaseT (PoH)
- Bidirectional IR and RS232
- Ethernet pass-through
- -port network switch.
Why not buy this Intelix INT-HDX100-TX HDMI Slim 100M, POH, IR and Control HDBaseT Extender - Transmitter today?
Intelix INT-HDX100-TX HDMI Slim 100M, POH, IR and Control HDBaseT Extender - Transmitter
- Input/Output Connections
- HDMI Input: One (1) HDMI Type A Receptacle
- HDBaseT Port: One (1) 8P8C port (Shielded RJ45)
- Ethernet: Two (2) 8P8C port (Shielded RJ45)
- Power: One (1) 5.5 mm OD, 2.6 mm ID Threaded Barrel
- RS232 Port: One (1) 3-pin Removable Terminal Block Connector
- IR Input: One (1) 3.5 mm TRS Receptacle
- IR Output: One (1) 3.5 mm TRS Receptacle
- Supported Audio, Video and Control
- Video Resolutions
- SMPTE: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, UHD/30
- VESA: Resolutions up to 1920x1200
- Color Depth: 24, 30, 36, 48bit
- Maximum Video Compatibility at 100 m: Deep Color 48/36/30/24 Bit at 1080p, 3D, UHD/30
- Video Compliance: HDMI 1.4 and HDCP 1.4/2.2
- Embedded Audio: Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio
- ARC (Audio Return Channel): No
- HEC (HDMI Ethernet Channel): No
- CEC (Consumer Electronics Control): Yes (Pass-through Only)
- Supported Baud Rates: 2400, 4800, 9600, 19200, 38400, 57600, 115200
- Supported IR Carrier Frequencies: 33 to 55 kHz
- Ethernet: 100BaseT
- HDBaseT Signal Characteristics
- Maximum Distance: 100 m (328 ft)
- Cable Requirements: Continuous shielded solid core Cat 5e or greater with TIA/EIA-568B crimp pattern (no couplers in-line)
- Bandwidth: 10.2 Gbps
- HDBaseT Chipset: VS100TX
- Chassis and Environmental
- Construction: Black Alumininum
- Dimensions (H x W x D): 16.2 mm x 152 mm x 84 mm (0.64 in x 5.98 in x 3.31 in)
- Operating Temperature: 0? to +40? C (+32? to +104? F)
- Operating Humidity: 20% to 90%, Non-condensing
- Storage Temperature: -10? to +60? C (+14? to +140? F)
- Storage Humidity: 20% to 90%, Non-condensing
- Power and Regulatory
- Power Input: 24V DC 1.25A or 48V DC PoH (Power over HDBaseT)
- Power Output: 48V DC PoH (Power over HDBaseT)
- Power over Ethernet (PoE) Compatibility: 802.3af Alternative A
- Power Consumption: 5 watts
- ESD Protection: 15kV air, 8kV contact
- Regulatory: FCC, CE, RoHS
- Other
- Warranty: 2 years
- Diagnostic Indicators: HDCP, Link, and Power
- Included Accessories: Installation Guide, Power Supply, 3-pin Removable Screw Terminal
- Optional Accessories: IR emitter (DIGIB-EMT), IR receiver (DIGIB-EYE), rack mount (INT-EXRMK), rack mounted power supply (PSU12)
- HDBaseT Receiver (A/V, PoE, Control) Compatibility: DIGI-HD60C-R, DIGI-HDX-R, FLX-64, INT-HD70-RX, INT-HDX100-RX, DIGI-BSR-4K
- HDBaseT Receiver (A/V, Control) Compatibility: FLX-BI4
- HDBaseT Receiver (A/V and PoE) Compatibility: DIGI-HD60-R
