Intelix INT-1X4B-1H 1X4 HDMI / HDBaseT Distribution Amp / Splitter
accepts a single HDMI input and splits into four HDBaseT outputs. The INT-1X4B-1H is designed with an HDMI loop out which is intended to cascade to additional INT-1X4B-1H units to distribute to multiple displays via HDBaseT. It supports video resolutions up to 4K@60Hz / 4:2:0 / 8bit deep color and all HDMI audio formats.
It can extend 1080p signals on each output up to 230 feet (70 meters) and 4K signals up to 130 feet (40 meters) over a single CAT6 Ethernet cable. It supports Power over HDBaseT (PoH), which allows the compatible receivers to be powered from the splitter over the Ethernet cables. It supports bidirectional IR and RS232 pass-through and loop output.
The Intelix INT-HD70-RX and INT-HDX100-RX are compatible Intelix receivers with the INT-1X4B-1H distribution amplifier.
Intelix INT-1X4B-1H 1X4 HDMI / HDBaseT Distribution Amp / Splitter Features:
- One HDMI input
- Four HDBaseT transmitter outputs with PoH and IR / RS232 pass through control
- Support resolutions up to 4K@60Hz 4:2:0 / 8 bit color @40 meters /130'
- Support resolutions up to 1080p@60Hz @70meters /230'
- One HDMI output for local monitor or cascading multiple INT-1X4B-1H units
- RS232 cascading control option for controlling multiple INT-1X4B-1H units
- Bidirectional wide band IR and RS232 routing for discrete display control
- HDCP 2.2 compliant
- Diagnostic LEDs; built-in surge protection
- Digital signage, video distribution, corporate, commercial, residential, entertainment
Why not buy this Intelix INT-1X4B-1H 1X4 HDMI / HDBaseT Distribution Amp / Splitter today?
Intelix INT-1X4B-1H 1X4 HDMI / HDBaseT Distribution Amp / Splitter Specification:
- Input/Output Connections
- HDMI Input: One (1) HDMI Type A Receptacle Connector
- HDBaseT Outputs: Four (4) Shielded RJ45 Female
- HDMI Output: One (1) HDMI Type A Receptacle Connector
- RS232 In: One (1) 3-Pole/3.5mm Euroblock
- RS232 Out: One (1) 3-Pole/3.5mm Euroblock
- IR ALL IN Input: One (1) 3.5mm TRS
- IR Loop Out: One (1) 3.5mm TRS
- IR Out: One (1) 3.5mm TRS
- 24V DC Power: One (1) Locking Barrel (5.5 mm OD, 2.1 mm ID)
- Supported Audio, Video, and Control
- Maximum Video Compatibility at 70 m: up to 1080p
- Maximum Video Compatibility at 40 m: up to 4K@60Hz / 4:2:0 / 8 bit deep color
- Maximum Passive HDMI Cable Distance: 5 m (16.4 ft)
- Video Compliance: HDMI 2.0 and HDCP 2.2
- Embedded Audio: Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio
- Input DDC Signal: 5.0 volts p-p (TTL)
- Input Video Signal: 0.5 to 1.0 volts p-p
- RS232 Baud Rate: 2400, 4800, 9600, 19200, 38400, 57600, or 115200
- IR Carrier Frequency Range: 33-55kHz at 5 volts
- HDBaseT Signal Characteristics
- Maximum Distance: 70 m (up to 1080p) , 40 m (up to 4K@60Hz / 4:2:0 / 8 bit deep color)
- Cable Requirements: Solid core shielded Category 6 F/UTP cable or greater with TIA/EIA-568B crimp pattern
- Bandwidth: 10.2 Gbps
- Chassis and Environmental
- Enclosure: Painted Aluminum
- Dimensions: 44 mm x 220 mm x 148 mm (1.73 in x 8.66 in x 5.83 in) - 1RU
- Shipping Weight: 725g (1.48 lbs.)
- Operating Temperature: 0? to +55? C (+32? to +131? F)
- Operating Humidity: 10% to 90%, Non-condensing
- Storage Temperature: -20? to +70? C (+14? to +158? F)
- Storage Humidity: 10% to 90%, Non-condensing
- Power, ESD, and Regulatory
- Power Supply Input: 100V-240VAC / 50-60 Hz
- Power Supply Output: 24VDC / 2.71A
- Power Consumption: 45 watts (max)
- ESD Protection: 15kV
- Product Regulatory: FCC, CE, RoHS
- Power Supply Regulatory: CE, RoHS
