This
Digital Audio & Toslink to RCA Audio Converter converts analog stereo audio signal from R/L input to Coaxial and Toslink outputs simultaneously. The output digital audio signal is 2-channel uncompressed LPCM (Linear Pulse Code Modulation) with sampling rate at 48 KHz. This Converter is compact in size, and simple to install.
Digital Audio and Toslink to RCA Audio Converter Features:
- Input Audio: Toslink, 1 X RCA(Coaxial)
- Output Audio: Stereo R/L
- Size(LxWxH): 50 x 40 x 35mm
- Operating Temperature: 0˚ to 70˚C
- External Power Supply: 100-240V` 50-60Hz5V DC@2A
- Power Consumption: 0.5watts(max)
NOTE: This Digital to analog audio converter does not support Dolby, DTS, or other surround sound signals. Therefore, it is important that the digital audio output of your device defaults to or can be set to PCM/LPCM output. Otherwise the sound will be static. Verify you can turn off Dolby Digital in the source you will be connecting to this converter.
This Digital to Analog Audio Converter converts digital stereo audio (Coaxial and Toslink) to R/L audio. This Converter is compact in size, and simple to install.
Why not buy this Digital Audio and Toslink to RCA Audio Converter today?
NOTE: This Digital to analog audio converter does not support Dolby, DTS, or other surround sound signals. Therefore, it is important that the digital audio output of your device defaults to or can be set to PCM/LPCM output. Otherwise the sound will be static.
NOTE: This Digital to analog audio converter does not support Dolby, DTS, or other surround sound signals. Therefore, it is important that the digital audio output of your device defaults to or can be set to PCM/LPCM output. Otherwise the sound will be static. Verify you can turn off Dolby Digital in the source you will be connecting to this converter.
Q:. Will this device convert Dolby Digital to RCA stereo?
A: NO it will not convert Dolby Digital but on alot of products you can change the source device settings. The most common problem we have seen is a change in settings on your device your trying to convert to right and left stereo. Verify you can turn off Dolby Digital in the source you will be connecting to this converter.
As advertised this device converts LPCM (Linear Pulse Code Modulation), which is a method of encoding audio information digitally. Sometimes we have seen that customer have their systems set to Dolby Digital. This setting must be changed on the device your are trying to convert. Most DVD players and other devices support LPCM and other settings. You need to get into the menu of the source device and adjust Dolby Digital to LPCM or other by using your remote control.