The Chameleon 64i modular audio/video routing switcher is expandable to a 64x64 matrix in a single 9U rackframe. Matrix configurations are assembled by inserting cards onto the backplane in the rackframe. Crosspoint arrays are assembled by increments of eight. These 25 MHz matrix routing switchers route NTSC or PAL video and mono or stereo unbalanced audio. Audio can follow video or can be routed separately.
NOTE: See our replacement products for Knox Chameleon Matrix Switchers below:Knox Chameleon Matrix Switcher Replacements
If you don't find a similar Knox product call us at 800-841-9238 right now to discuss your needs.
In addition to routing audio, the optional Volume and Tone control (VT) package is available. The VT option allows full control of input and output levels, balance, and bass and treble for any audio signal directly from the Chameleon 64i. Set variable audio input levels in to the 64i and control the output volume to each destination directly from the router. Tone adjustments can also be controlled for optimal audio quality.
Audio control features include input trim, variable audio output levels, loudness and mute. Output volume and balance controls allow for 1.25db incremental adjustments, or levels can be pre-set. Input trim adjustments provide control of every audio input signal, which can be individually trimmed in 1.25db increments to achieve input matching. Bass and treble control features offer full boost and cut capability. The loudness function, related to the Fletcher Munson curves, may be toggled on and off. Audio fade-out is enabled through the timed fader. The timed-audio fade function offers a full-fade range of one-tenth of a second to 10 full seconds.
The VT features are controlled either via the front panel controller or through RS232. Optional Windowsબontrol software from Knox features a volume and tone control graphic user interface.
