8x8 HDMI Matrix Switcher with Video Wall Processor

WolfPack

Discontinued

Part Number:
SUPER17-8x8
UPC:
796168585885
Availability:
Contact us for availability
1:
8x8 HDMI Matrix Switcher w/Video Wall
2:
IR Remote, Software, RS232 & Front Control
3:
Seamless 100ms (0.1 sec) Switching
4:
3.5mm Audio in & output on each card
5:
Optional Control4™ Drivers
6:
Video Wall Splicing Edge Adjustment
WolfPack HDMI Switchers HDTV Supplys WolfPack™ 8x8 HDMI Matrix Switcher with Video Wall is an integrated HDMI video and HDMI audio modular HDMI chassis. The 17-slot chassis back plane allows various technologies, like HDMI, to be converted and switched eliminating external converters. The 8x8 HDMI Matrix Switcher with Video Wall allows any input to be routed to any output, or the same input to be routed to all outputs, or any combination using HDMI input and HDMI output cards or other cards of different or mixed technologies. There is 1-additional HDMI slot for field expansion.

The core of the 8x8 HDMI Matrix Switcher with Video Wall consists of its highly configurable backplane that supports 17-slot seamless HDMI input or any seamless HDMI output cards in any Mix-N-Match quantity up to 17 total cards. It is 1080p/60 compliant. You can control the HDMI Matrix Switcher via a few simple button taps from the front panel buttons, a remote control, PC Software control or the RS-232 serial port. It can also be configured with multiple HDMI signals to be displayed on 2 or more TVs as a Video Wall. Our 8x8 HDMI Matrix Switcher with Video Wall can support high-resolution HDMI sources routed to HDMI displays, monitors, projectors, etc.

By having 1-port slide in cards the matrix is very reliable as in the unlikely even there is a loss of signal you just replace the card with a spare you have purchased or order another from us. The complete matrix does not have to be sent to us for a repair. The EDID can be selected between 7-different modes or copied from the displays.

What sets our 8x8 HDMI Matrix Switcher with Video Wall apart from others:

  1. Modular card cage chassis has 17-HDMI card slots
  2. Use 17 HDMI input or output cards in any quantity up to 17-cards - Mix-N-Match
  3. Seamless 100ms (0.1 sec) Switching
  4. 3.5mm Audio in and output on each card
  5. Chassis supports any 1080p input & output card in any slot
  6. Comes with a Remote control
  7. Splicing edge adjustment
  8. Any combinations for the inputs and outputs
  9. Color, brightness adjustment from the control software.
  10. 32-Programmable Preset Scenes To Choose From
  11. Control via a remote control, Software, RS232 & Front Buttons
  12. Incorporates a Video Wall function
  13. 1 - Year WolfPackCare Warranty
  14. Free Lifetime Telephone, CHAT, TEXT and Email Tech Support

8x8 HDMI Matrix Switcher with Video Wall Configuration:

  • 1 - 17-slot Card Cage
  • 8 - 1-port  HDMI seamless input cards = 8-HDMI inputs
  • 8 - 1-port  HDMI seamless output cards = 8-HDMI outputs

WolfPack 8x8 HDMI Matrix Switcher with Video Wall Features:

  • TV Wall Function
  • Seamless switching of 1080p HDMI input and HDMI output cards
  • Supports HDMI Video Wall installations
  • Adjustable HDMI output resolution on each card
  • 3.5mm Audio in and output on each card
  • On Screen Display showing the HDMI input sources
  • Auto adapts to HDMI video resolutions as well as manually selection on the video cards
  • HDMI input resolutions: 480i@60Hz/576i@50Hz, 720@50Hz/720p@60Hz, 1080i@50Hz/1080i@60Hz and 1080p@24@25@30@50@60Hz
  • HDMI output resolutions: 480i@60Hz/576i@50Hz, 720@50Hz/720p@60Hz, 1080i@50Hz/1080i@60Hz and 1080p@24@25@30@50@60Hz
  • HDMI: Output range 800mVp-p
  • Flexible card type design supporting up to 17-seamless HDMI input or seamless HDMI output cards
  • Mix-N-Match many different types of cards in any slot
  • Advanced EDID management for rapid integration of sources and displays
  • Front-panel LCD display for status feedback
  • Front-panel push buttons for local switching
  • RS-232 Serial interface for remote control via an automated control system (not supplied)
  • Supports resolution exchanges with several resolutions
  • Hot-pluggable
  • HDMI 1.3 and HDCP 1.3 compliant
  • Uses a dual control system
  • Control with a few button taps from the front panel buttons, a WEB GUI Browser control or the RS-232 serial port
  • The matrix has IR and a remote control
  • Rack-mountable
  • Seamless 100ms Switching
  • Adjustable outputs resolution
  • Corresponding 3.5mm Audio in and output.
  • Modular designing, hot-plug
  • OSD mark on the input sources
  • Supports flexible inputs and outputs configurations

Why not buy this 8x8 HDMI Matrix Switcher with Video Wall today?

SwiftSwitch SEAMLESS SWITCHING: Our WolfPack Modular HDMI Matrix Router can be configured with instantaneous video switching which delivers full 1080p video powered by our WolfPack engine implemented at each output port. This high-performance engine processes HDMI signals by executing EDID hops and HDCP handshakes simultaneously at both the source input and the display outputs and scaling inputs for the best output resolution while setting the output clock timing and using a frame buffer to retain the input signal information for the fastest output.

The WolfPack Modular HDMI Matrix Router allows switching between inputs with a clean video cut (frame-to-frame switching with no glitches). The WolfPack Modular HDMI Matrix Routers advanced processor allows it to process live signals simultaneously which means it can seamlessly and instantly switch (~100ms) between HDMI inputs and outputs. Most non-seamless matrix switchers require a delay of several seconds before they can switch between devices but with this WolfPack family that wait time is completely eliminated.

Supports EDID Management: Ensure that even the most difficult display can receive audio and video with eight programmable memory presets loadable to any source connected to the matrix.

8x8 HDMI Matrix Switcher with Video Wall Specs:

  • Input cable distance: ~15 feet AWG22 HDMI 1.4 high speed cable
  • Output cable distance: ~50 feet AWG22 HDMI 1.4 high speed cable
  • Resolution support: 1080p/60, 1080p/30, 1080i, 720p, 480p, but cannot support 480i
  • Supported Input & Outputs Signals:
    • HDMI: 1080p at 60 Hz
  • Control: Remote control, Software, RS232 and front buttons
  • Power Supply: 100 to 240VAC, 50-60Hz
  • Power Consumption: 50W 70W
  • Operating Temperature: -10℃ to 50℃
  • Storage Temperature: -25℃ to 55℃

Why not buy this 8x8 HDMI Matrix Switcher with Video Wall today?

1. Connect the control PC to the the matrix switcher either by LAN(IP) or the RS232. When using an IP control, click Connect. Sometimes the control software doesn't pop-up the connection info even if it's showing "Disconnect". It could be not really be connected so you will need to do the switching to test> If you hear a beep sound then it's connected. Otherwise it's not really connected.

WolfPack HDMI Switchers

2. Please make sure the outputs on the matrix switcher are connected to the TVs in order (Output 1 to TV1, Output 2 to TV2...). If you have 5 outputs, the output configuration should be 2x3. Please see below as the output to the TVs should be connected(Output1 to TV1, Output2 to TV2, Output4 to TV3, Output5 to TV4). More output cards can be output3 or output6.

WolfPack HDMI Switchers

Why not buy this 8x8 HDMI Matrix Switcher with Video Wall today?

Control

When one is designing an HDMI Matrix Switch the most important initial specification is the number of inputs and outputs you will need in your facility. The next, and often forgotten, is how the user wants to control those inputs and outputs. HDTV Supply has your back when you're buying one of our WolfPack Family of Modular Matrix Switchers as we have dozens of way to control the inputs and outputs and are shown at Controlling WolfPack Modular Matrix Systems, as well as below:
  1. Free iPad App (iOS)
  2. Free iPhone App (iOS)
  3. Free iPod App (iOS)
  4. Free Android Tablet App
  5. Free Android Phone App
  6. Free Samsung Galaxy Tablet App
  7. Free Samsung Galaxy Phone App
  8. Free Web GUI from any browser is standard
  9. Front panel push-buttons are standard
  10. Optional $100 7" Color Touch Screen on select models (Call)
  11. Dual RS232 ports are standard on select models
  12. Dual TCPIP ports are standard on select models
  13. DTVGame Sports Bar DirecTV™ Control System (Call)
  14. Allonis Sports Bar DirecTV™ Control System (Call)
  15. Free One-Way Control4 Drivers
  16. Optional $99 2-Way Control4 Drivers
  17. Optional $99 URC Drivers
  18. Optional $129 Crestron Drivers
  19. Optional $99 Elan Drivers
  20. Optional $99 RTI Drivers
  21. Optional Harmony Remote Control Codes for select models (Call)
For an up-to-date listing of all the methods to control our WolfPack Matrix Switchers go to Ways to Control Our WolfPack Family Of Modular Matrix Systems.

Control Drivers

DirecTV Controller

Apps

HDTV Supply has successfully installed our WolfPack, WolfPackLite and our other HDMI Matrix Switchers in Sports Bars, Restaurants, Bowling Alleys, Fitness Centers, Malls, Places of Worship, Data Centers, Gaming Rooms, Nail Salons, County Clubs, Casinos, Factories, Conference Rooms, Schools, Home Theaters or many other installations requiring HDMI matrix switching. The reason, we are told by the users, is the number of features we offer compared to other companies they looked at.

These modular HDMI matrix switchers can usually be integrated with many third party control systems using the RS232 port on the back of the matrix.

For experienced AV hardware and software professionals who want to write their own drivers for 3rd party control systems from:

  • AMX™
  • Control4™
  • Creston™
  • RTI™
  • DTVGameControl™
  • Elan g!™
  • Media Switcher™
  • OnControls™
  • Savant™
  • SimpleControl™
  • SwitchItUp™
  • SAVI Control™
  • URC Control™
...and we have created a simple and very easy to use RS232 script to write your own drivers.

EXAMPLE: If you want to switch input 8 to output 1, 8, 16, the RS232 command would be x1&8&16. and notice the command has a period (.) at the end of the string. The matrix even replies "OK" when the right command is received and "Failed" when receiving a wrong command. Here is the RS232 User Manual if you want to write your own drivers.

How to use the info:

END USER: If you are an end user and want to have a whole-house control system from any of the above 3rd party control houses but your budget can't support the price you were quoted, do the following:

  1. Call us for a quote
  2. Once you get our quote call a 3rd party control reseller or installer in your area and tell them "Here is the hardware I want to use, please give me a quote on writing the software and installing all of the hardware at my location." You usually can save $1,000s on larger systems.
CAVEAT: We are not certified by any of the above 3rd party control systems companies nor have the necessary hardware to verify, troubleshoot and support the 3rd party writing of the code. We do warranty, though, that the RS232 script in the above RS232 Users Manual has and will work to control the matrix directly.

Also, CLICK HERE for our DirecTV™ & HDMI Matrix Control Software for Bars & Restaurants

Why not buy this 8x8 HDMI Matrix Switcher with Video Wall today?

Q: What are the dimensions of the chassis?
A:
They are:
Super17: 2U - 17.32 x 15.74 x 3.86 inch (440 x 400 x 98mm) with a chassis weight of 27.6 lbs (12.5kg) Q: Do you have any tips in the unlikely event the unit fails?
A:
Turn it OFF and then disconnect the matrix from the AC power and all cables. Pull out each board from the rear and push back in. Plug all cables back in and turn it on.

HDTV Supply's WolfPack Family of Matrix Switchers can be created however you wish. Just SCROLL DOWN and fill out the below and press SUBMIT and we will send you a quotation based upon your needs within an hour.

If it doesn't meet your needs just call us right now at 833-WOLFPACK or 833-965-3722 or email us at support@hdtvsupply.com

For Questionnaire Click Here