The 8x16 Pseudo HDMI Matrix Router Over CAT6 design bundle is for applications that that can′t afford a true $5,050 true 8x16 HDMI Matrix Router Over CAT6 and can live with splitting each HDMI output of the matrix.
The WolfPack 8x16 Pseudo HDMI Matrix Router Over CAT6 bundle is made up of
- 1 - WolfPack 8x8 Matrix HDMI Switch
- 8 - 1x2 HDMI Splitter
- 16 - HDMI Over CAT6 Extenders.
- 8 + 8 + 1 = 17 AC adapters at the matrix + your AC adapter needs may be up to 8 more totaling 25.
- 1 - AC adapter at each TV for the HDMI receiver
Again, each of the WolfPack 8-matrix outputs will go in to each 1X2 splitter with all 2-splitter outputs having the same picture. This means if you change TV channels it will change the picture on 2-TVs. If you do not want that see our true 8x16 HDMI Video Matrix Switchers.
This WolfPack 8x16 Matrix HDMI Switch provides the most flexible and cost effective solution in the market to route high definition video sources plus multi-channel (up to 7.1-channel) digital audio from any of the eight HDMI source devices to the remote displays at the same time. Because it is a matrix switcher, it allows any input to be routed to any output; or the same input to be routed to all outputs, or any combination.
HDTV Supplys eight (8) 1x2 HDMI Splitters with EDID are designed to amplify and distribute the input HDMI signal to 2 HDMI outputs simultaneously and stores 16-presets of EDID settings to offset EDID problems in your system. The 1x2 HDMI Splitters with EDID also repeats the digital audio embedded in the HDMI signal and outputs it via optical SPDIF and/or a 3.5mm RCA L/R stereo audio out for connection to an amp, surround sound receiver or powered speakers. By having the audio coming out of the splitter you eliminate audio and video being out of synch.
This 8x8 Matrix HDMI Switch supports a LAN & RS232 Control and comes with a remote control. It can be controlled via the front panel buttons, a LAN & the RS232 serial port.
Why not buy this WolfPack 8x16 HDMI Matrix Router over CAT6 today?
WolfPack 8x8 Matrix HDMI Switch Specs:
- Interface HDMI-A
- Input cable distance: ~25 feet AWG22 HDMI 1.4 high speed cable
- HDMI version HDMI 1.3
- Bandwidth 300MHz
- Resolution Up to 1920x1080p@60Hz, 3D
- Clock Jitter <0.15 Tbit (1080p@60)
- RiseTime <0.3Tbit (20%--80%)
- RiseTime <0.3Tbit (20%--80%)
- Transmission Delay 5ns
- Amplitude T.M.D.S +/- 0.4Vpp
- Differential impedance 10015ohm
- RS232 control
- Baud rate and protocol Baud rate閿9600,data bit閿8閿 stop bit閿1,No parity checking
- Max Consumption 20W
- Adapter 12V/3A
- Matrix Mechanical dimensions Size(mm) 430(L)X220(W)X44 (H)
- Weight 3Kg
WolfPack 8x8 Matrix HDMI Switch Specs:
- 9 - Power Adapters
- 1 - CD
- 1 - User Manual
- 1 - Matrix
- 8 - separate 1X2 splitters
- 16 - HDMI extenders (transmitter and receiver) plus 32 - AC adapters
Why not buy this WolfPack 8x16 HDMI Matrix Router over CAT6 today?
A: Yes.
Q: I see the the HDMI extenders come with 2-remote IR cables, will the remote IR work with this matrix?
A: No, the cables are used when the application has one source and one widescreen. They can't be used with this matrix and need to be set aside and not used.
Q: Can I use unpowered HDMI over CAT6/6 extenders with this matrix?
A: We don't recommend them with our matrices, or anyone else's, due to them consuming power from the matrix and the matrices are not designed to power many external devices.
Consider the example of 9 - HDMI balun transmitters that need 0.5a amp each to power it times 9 or 4.5 amps the matrix would have to supply. The power supply of this matrix is rated at 12v at 3.5 amp so in that example the matrix would probably break down and your warranty may be voided. See the companion powered HDMI extenders in the above OPTIONS that have 2-AC adapters.
HDMI cables with built-in boosters also consume power also and we don't recommend more than 2, if at all. You must use our low power ones, also.
Q: Do the optional HDMI extenders support Remote IR?
A: They send perfect audio and video but the remote IR doesn't support this device as it only works with with 1-source & 1-TV. See RF remote controls if you want to control all your devices from afar.
HDTV Supply's WolfPack Family of Matrix Switchers can be created however you wish. Just SCROLL DOWN and fill out the below and press SUBMIT and we will send you a quotation based upon your needs within an hour.
If it doesn't meet your needs just call us right now at 833-WOLFPACK or 833-965-3722 or email us at support@hdtvsupply.com