NOTE: This product has been discontinued. See the above SIMILAR Tab for equivalent products or, if not there, call us at 833-WOLFPACK (833-965-3722) right now to discuss your needs.
The 4x4x2 HDMI Matrix Switch Using HDBaseT to CAT5 routes four Hi-Def sources to any four HDTV displays, supporting 1080p Full HD plus all 3D formats, along with multichannel digital audio formats such as Dolby True HD and DTS-HD Master Audio. Based on HDBaseT Lite chipset inside, the output distance can reach up to 220 feet via a single CAT5e or CAT6 cable. Each source can be routed to any display using the front-panel push buttons, IR remote control, RS-232 interface, or via TCP/IP.NOTE: If both the HDBaseT CAT5/6 and the standard HDMI outputs are used, the number of total outputs would be up to 8. Each individual zone (example, VIDEO OUT 1) of the CAT5 and HDMI output would have the same picture, though. Think of it as a 4X4X2.
4X8 HDMI Matrix with HDBaseT Features:
- POE eliminates an AC adapter at the TV
- Web GUI for browser control
- Bi-directional IR Matrix (Includes 4-IR Transmitters and 5-IR receiver cables)
- 4 satellite remote controls for each zone's source switch
- EDID Management (Thru DIP switch & Web GUI)
- Matrix has 4x RS232 ports to control sink devices with optional receivers with RS232 Supports resolutions up to 1080p@60HZ, 36-bit deep color
- HDBaseT Lite chipset inside for the output distance up to 70m or 220 feet.
- Matrix can power the remote receivers, with POE, no power supply needed for the receivers.
- Allows any source to be displayed on multiple displays at the same time
- Allows any HDMI display to view any HDMI source at any time
- Dolby TrueHD and DTS-HD master audio pass through HDMI output
- Advanced EDID management for rapid integration of sources and displays
- Front-panel LCD display for status feedback
- Multiple switching mode, push-in button, IR remote control, RS-232 control, and TCP/IP control
- Easy installation with rack-mounting ears
- Full 3D pass- through.
- HDCP compliant
- Easy to use, install in seconds.
- Allows up to four HDMI audio/video devices to be independently switched to 4 or 8 HDMI monitors, TVs or projectors
- The 4-outputs could show the same or different sources simultaneously no matter the source is HDCP or not.
- The four outputs are all include one HDMI-A output port and one HDBT output port. They can output simultaneously.
- Support high definition resolutions 1080p, 1080i, 720p and other standard video formats.
- Each port supports HDMI or DVI inputs.
- With extra infrared receiver extension.
- Five switching modes: panel buttons, local IR, IR call back from remote rooms, RS232 and Ethernet.
- IR system could control the sources from the sinks or control the sinks from sources.
- HDCP compliant.
- HDMI 1.3 version.
- 3D support.
- The four outputs are all include one HDMI-A output port and one HDBaseT output port. They output simultaneously.
- Supports 1080p, 1080i, 720p and other standard video formats.
- Each port supports HDMI or DVI inputs.
- With extra infrared receiver extension.
- HDCP compliant with 2D and 3D support.
- Size: W 336mm X H 95.5 mm
The features of HDBaseT used in this 4x8 HDMI Matrix Switch include:
- Uncompressed video/audio up to 10.2 Gbps.
- Maximum cable length of 60M
- Low cost standard Cat5e/6 LAN cable
- Utilizes a standard RJ-45 connector
- Support for 100Mbps Ethernet
- Easy installation utilizing existing in-wall Ethernet connectivity
- Supports HDCP
Why not buy this 4x8 HDMI Matrix Switch Using HDBaseT to CAT5 Technology today?
4x8 (4x4x2) HDMI Matrix Switch Using HDBaseT Features:
- Bandwidth:2.97Gbps per color
- Video Input Connectors: 4x HDMI Type A, 19-pin, female
- Video Output Connectors: 4x HDMI Type A, 19-pin, female ,4x RJ-45 connector
- RS-232 serial port: 1xDB-9, female, 4x3-pin phoenix connector,female
- TCP/IP Control: RJ-45, female
- IR Input ports: 5x 3.5mm stereo jack
- IR Output ports: 4x 3.5mm stereo jack
- Rack-Mountable: 1 U rack height, rack ears included
- Dimensions (W x H x D): 428mm x 235mm x 43mm , without feet
- Shipping Weight: 2.7kg
- Operating Temperature: 32˚F to 104˚F (0˚C to 40˚C)
- Storage Temperature : -4˚F to 140˚F (-20˚C to 60˚C)
- Power Supply: 1x24V/3.5A DC
- 70m / hop for long distance extension over single Cat6
- 2D and 3D compliant
- IR backward
- Metal casing
- Supports all HDMI 1.3 formats
- Use HDBaseT Lite Technology to 70M
- Manage both course device and display remotely
- 340 MHz bandwidth and extends up to ~200 feet
- Full IR bandwidth capability up to 80 KHz
- Deep Color Video with EDID pass-thru capability
- DTS-HD & Dolbey TrueHD multi-channel digital audio
- Includes 4-Receivers and Infra-Red blaster modules
The Wolfpack family can roam long distances even some up to 300 feet over HDBaseT trails and howl 4K whereas those who try to trap the WolfPack fails & runs away to the older devices.
You can only get this one-of-a-kind WolfPack 4x8 (4x4x2) HDMI Matrix Switch Using HDBaseT from HDTV Supply.
Reasons To Buy an HDTV Supply WolfPack 4x8 (4x4x2) HDMI Matrix Switch Using HDBaseT:
- All WolfPack products have FREE HDTV Supply U.S. based Live Telephone Lifetime Tech support
- HDTV Supply has a dedicated TEXT support line at 805-409-0208 to support you
- HDTV Supply has a dedicated Product Manager for WolfPack products to assist with any special needs
- If there is a WolfPack firmware update for your product you will find it at our site
- Many times we will list lower refurbished WolfPack products at our site
- All WolfPack products are usualy in stock and ship the same week day if the order comes in by 12PM PST
- You can buy WolfPack products from us with most any credit card, your Amazon account and PayPal
- HDTV Supply has many videos to show the features of WolfPack products
- You will find all WolfPack User Manuals and other manuals at our site
- From time-to-time HDTV Supply runs Factory Authorized sales on WolfPack products
- All WolfPack products bought from HDTV Supply are brand new and in unopened boxes.
- All WolfPack products bought from HDTV Supply are shipped in double carton boxing.
- All WolfPack products bought from HDTV Supply have full value shipping insurance
- All WolfPack products bought from HDTV Supply have a 30-day No-Hassle returns
- All WolfPack products bought from HDTV Supply can be shipped blind to your customer
- HDTV Supply has shipped >1,000 WolfPack products throughout the world
- HDTV Supply ships all WolfPack products from here in the U.S.
- HDTV Supply stocks extra WolfPack accessories in case you misplace your remote or other unit
- HDTV pride ourselves on confidentiality and any personal information that you may share with us is kept absolutely private.
Why not buy one of HDTV Supplys WolfPack 4x8 (4x4x2) HDMI Matrix Switch Using HDBaseT today?
A: The remote control has an industry standard IR frequency of 38KHz but the matrix itself supports 38KHz to 56KHz.
Q: Is this a true 4x8 HDMI Matrix Switch Using HDBaseT?
A: No, if both the HDBaseT CAT5/6 outs and the standard HDMI outputs are used, the number of total outputs would be up to 8. Each individual zone (example, VIDEO OUT 1) of the RJ45 (CAT5) and HDMI output would have the same picture, though. Think of it as a 4X4X2.