Build Your Own 4K HDMI Over IP Matrix Switch with Video Wall

WolfPack

$250.00
Part Number:
HDTV1520G
UPC:
728350685684
Availability:
Usually ships in 1 to 2 weeks
1:
4K HDMI Over IP Distribution System To ~400'
2:
4K HDMI Matrix, Splitter or Switcher
3:
Configure to a 4K Video Wall up to an 8x16
4:
Configure KVM, USB, Audio or RS232 Over IP
5:
Bezel Correction, Screen Rotation, Cropping & Scaling
6:
Need help? Call 833-965-3722
MUST CLICK TO BUILD YOUR OWN:
HDTV Supplys WolfPack 4K HDMI Over IP system uses Gigabit compression technology to send a visually lossless HDMI video signal up to a 4K image and 8-channel digital audio across a 1000BT LAN (UHD over IP). HDTV Supplys WolfPack Windows based iSwitch software allows UHD/FHD video to be sent over an IP network to create Many To Many matrix switchers as well as TV video walls. You now can connect multiple AV sources with many displays over IP‐Hosts/Clients as well as control them with iSwitch in the IT room.

HDTV Supplys WolfPack HDMI over IP products lets you create any size 4K UHD or 1080p HDMI matrix using a 1 GB network and CAT6/7 cabling up to ~400 feet. Any combination of inputs and outputs is possible and the system can be easily be in-the-field expanded to accommodate additional sources and displays. In theory you can have a limitless HDMI Distribution System including one-to-one, one-to-many, many-to-one and many-to-many matrix switch as well as a Video Wall up to 8x16 to configure to your needs. A built in 4K scaler lets 4K sources be viewed in 2160p on 4K screens and in 1080p on Full HD screens simultaneously.

Field Expandable: When you add more widescreens or source devices just buy more transmitters and/or receivers up to a total of 51, depending upon that size Ethernet switch you purchased above.

Built-in up scaling and down scaling: HDTV Supplys 4K HDMI Over IP system allows you to mix-n-match TVs with different resolutions. No need to upgrade every TV to 4K as our receiver in our 4K HDMI Over IP system features a built-in scaler that downscales 4K to 1080p for viewing on 1080p projectors or TVs. You can instantly switch between source devices also which many HDMI matrices cannot do. Using this 4K HDMI Over IP system you can have a mixture of 1080p and 4K TVs as the built-in scaler downscales 4K with HDCP 2.2 to 1080p for viewing on Full HD TVs. You can instantly switch between sources too, whereas a traditional matrices may not be able to.

What sets the WolfPack™ AV over IP Distribution Set Apart From Others:

  1. Limitless A/V Distribution including one-to-one, one-to-many, many-to-one and many-to-many configuration
  2. Video Wall (up to 8x16)
  3. Video Scaler (like 4K in/1080P out, 1080P in/4K out)
  4. Video Rotation for 180/270 degree
  5. KM over IP (for KVM application)
  6. USB over IP (for all kinds of USB HID devices)
  7. Audio over IP (automatically switch off the HDMI audio)
  8. HDMI audio extraction to the line out on Client
  9. RS232 over IP

You can create a 4K HDMI Over IP system built to any size:

  • HDMI Matrices over IP to dozens of 4K sources and 4K TVs
  • HDMI Splitters over IP to a 4K source going to dozens of 4K TVs
  • HDMI Switcher over IP to multiple 4K sources going to a 4K TV
  • HDMI Video Wall over IP to multiple 4K sources and multiple 4K TVs

EXAMPLE 1 - 4K 16x32 Network HDMI Matrix Switch: Let′s say you have an application where you need a 16-4K sources sent to 32-TVs in any combination. The sources are 6 feet away from the switch and the TVs are 150 feet away from the switch. This is an 16x32 Network HDMI switch and here is what you need to buy from above:

  • 1 - 48-port IGMP 10-Gigabit Ethernet Switch
  • 16 - 4K HDMI Transmitters (TX)
  • 32 - 4K HDMI Receivers (RX)
  • All the above come with their own AC adapters which is 49 in this example
  • Field expandable by simply buying more TVs, sources and RXs and TXs

EXAMPLE 2: Let′s say you have an application where you need a 4K 3x3 Video Wall showing one large 4K picture and then, at times, show 9-different 4K videos from 9-HDMI sources. The sources and the TVs are 300 feet away from each other. Here is what you need to buy from above:

  • 1 - 24-port Ethernet Switch
  • 9 - 4K HDMI Transmitters (TX)
  • 9 - 4K HDMI Receivers (RX)
  • All the above come with their own AC adapters which is 19 in this example
  • Field expandable by simply buying more TVs, sources and RXs and TXs

EXAMPLE 3: Let′s say you have an application where you need one 4K source to be shown on 6-4K TVs in a 4x2, or 2x4 or 3x3 or 5x1 configuration. The source and the TVs are 200 feet away from each other. Our supplied WolfPack Video Wall software lets you modify the video dimensions allowing the resultant video to have the proper aspect ratio. Here is what you need to buy from above:

  • 1 - 8-port Ethernet Switch
  • 1 - 4K HDMI Transmitters (TX)
  • 6 - 4K HDMI Receivers (RX)
  • All the above come with their own AC adapters which is 8 in this example

4K HDMI Over IP Matrix Features:

  • 4K at 30 Hz compatible
  • PC controlled
  • Compliant with HDCP 1.4
  • Compliant with HDMI 1.4
  • Uses the above gigabit IP switches for extension and distribution.
  • Extends 1080p HDMI signals up to ~400 feet over a single UTP CAT6/7 cable.
  • Video Wall Support:
    • Up to 8x16 displays
    • Image rotate (180/270 degree)
    • Accurate frame gap compensation
    • Tearing free in single host mode
  • The Receiver (RX) is a Video Scaler converting a 4K input to a 1080p signal or converting a 1080p signal input signal to a 4K output (all at 30 Hz)
  • Video Rotation for 180/270 degree
  • Configurable to a KM over IP (for KVM application)
  • Configurable to a USB over IP (for all kinds of USB HID devices)
  • Configurable to an Audio over IP (automatically switches off the HDMI audio)
  • Line out HDMI audio extraction at the Transmitter (Client)
  • Configurable to an RS232 over IP

Why not buy this 4K HDMI Over IP Matrix and Video Wall today?

4K2K HDMI Over IP Features:

  • Ethernet Port: UTP/STP 1000Mbps (8K Jumbo Frame required)
  • Protocol: IP, UDP, TCP, ICMP and IGMP
  • HDMI Port: 19 pin type A female
  • RS232 Port: DB-9 Male
  • DC Jack (Power): DC5V, 2A
  • Audio Jack (LINE IN/OUT): 3.5mm
  • USB Port:
    • Transmitter: Type-B USB 2.0
    • Receiver: Type-A USB 2.0
  • LAN Bandwidth: 850Mbps max. for each source
  • Max. Supported Timing: 2160p 30Hz @30fps
  • Max Distance 400 feet or 120M with UTP between 2 devices (Host/Client/Ethernet Switch)
  • Built-in Output Scaler: Downscales to 1/2 and Upscales from horizontal pixels <=1920
  • Video Wall Support:
      Up to 8x16 displays
    • Image rotate (180/270 degree)
    • Accurate frame gap compensation
    • Tearing free in single host mode
  • USB Redirection: KM over IP is dedicated for an KVM application that doesnt support a touch screen and USB over IP that supports any kind of USB HID devices
  • HDMI Audio Redirection:
    • 2 Channel LPCM
    • 8 Channel LPCM
    • 5.1 Channel NLPCM
    • 7.1 Channel NLPCM
  • Receiver HDMI Audio Extraction: 2 Channel LPCM (32KHz~96KHz)
  • Stereo Audio Redirection: Transmitter LINE IN (switch off HDMI audio) and Receiver LINE OUT
  • RS232 Redirection: Transparent binary data transmission
  • HDMI 3D Support: HDMI 1.4b with 3D TnB, SbS and F.P.
  • Compression Technology: Patented visually lossless video compression algorithm
  • Certificate: CE/FCC
  • Power LED (Blue): Blinking means power on and the unit is booting up and when On means power on and the unit is active
  • Link LED (Yellow): Blinking means the unit is connecting with Host or Client and when the HDMI source is removed. When ON means all the connections are working.
  • Compliance HDMI 1.4b/HDCP 1.4/RoHS
  • Operating Temperature 0~70èš“
  • Operating Humidity 10~85% RH (no condensation)
  • Storage Temperature -10~80èš“
  • Storage Humidity 5~95% RH (no condensation)
  • Size 12.3x10.3x2.5(h) cm, 400g 12.3x10.3x2.5(h) cm, 400g
  • International Power Supply: 100/240 VAC at 50/60 Hz with USA male plug

Frequently
Reasons To Buy an HDTV Supply WolfPack Product

IGMP Ethernet Switches we recommend for <50 High Def devices:

  • Cisco SG300 series
  • Luxul AMS 2616P
  • Luxul AMS 1208P
  • Luxul XMS-2624P

IGMP Ethernet Switches we recommend for 50 to 400 HD over IP devices:

  • Cisco SG500 series
  • Cisco SG500X series
  • Luxul AMS-4424P
  • Luxul XMS-5248P
  • Luxul XMS-7048P

Here are POE Ethernet switchers for you to review...

PoE+ # Ports Stackable Jumbo Frames Full Layer 2/3 Support PoE Watts
LUXUL AMS 2616P ✓ 24 (16 PoE) ✓ ✓ 250
LUXUL AMS 1208P ✓ 10 (8 PoE) ✓ ✓ 130
LUXUL XMS-2624P ✓ 24 ✓ ✓ 370
LUXUL AMS-4424P ✓ 24 ✓ ✓ ✓ 250
LUXUL XMS-5248P ✓ 48 ✓ ✓ 740
LUXUL XMS-7048P ✓ 48 ✓ ✓ ✓ 740
CISCO SG300 SERIES ✓ 10-52 ✓ ✓ 62-740
CISCO SG500 SERIES ✓ 28-52 ✓ ✓ ✓ 180-740
CISCO SG500X SERIES ✓ 24-48 ✓ ✓ ✓ 180-740
Q: Can I use a Microsoft IE browser?
A:
Usually not, control the system via a Firefox or Google Chrome Web Browser

HDTV Supply's WolfPack Family of Matrix Switchers can be created however you wish. Just SCROLL DOWN and fill out the below and press SUBMIT and we will send you a quotation based upon your needs within an hour.

If it doesn't meet your needs just call us right now at 833-WOLFPACK or 833-965-3722 or email us at support@hdtvsupply.com

For Questionnaire Click Here