Pyro AV SDI2FBRtx HD-SDI to Fiber Optical Transmitter is a dual channel device supporting two independent and simultaneous video streams supporting data rates from 50 Mb/sec. to 3 Gb/sec. for each video stream making the PVC-970 a very cost effective solution. The HD-SDI2FBR to Fiber Optic Transmitter (PVC-970) provides two independent SDI inputs on 75 Ohm BNC connectors. The PVC-970 includes dual cable equalizers designed to restore signals received over 75 Ohm co-axial cable and is optimized for performance at 1.485 Gb/sec. and 2.97 Gb/sec. and supports SMPTE 424M, 292M and 259M standards. The PVC-970 also includes dual Multi-Rate digital re-clockers which recover the embedded clock and re-time the incoming video data from a SMPTE 424M, 292M or 259M-C compliant video signal.
Pyro AV SDI2FBRtx HD-SDI to Fiber Optical Transmitter Feathers:
- Supports 2 simultaneous SDI signals each up to 1080P60 (3 Gb/sec.)
- Dual Channel Optical Transmitter (SMPTE 297M-2006)supports data rates from 50 Mb/sec. to 3 Gb/sec.
- Robust error free transmissions for distances up to 30 Km (18.6 miles) over single mode fiber
- Hot-Pluggable and Hot-Swappable Optical module The SDI2FBR to Optical Transmitter (PVC-970) overcomes the distance limitations of transmitting video over coaxial or Ethernet cable allowing for broadcast quality video to be distributed over long distances while retaining pristine quality. The PVC-970 when coupled with the PVC-975 FBR2SDI Receiver provides a very cost effective method of distributing uncompressed 1080p 60 video streams over long distances.
Pyro AV SDI2FBRtx HD-SDI to Fiber Optical Transmitter Specifications:
- 2 each 75 Ohm BNC connectors
- Support for 2 separate video sources
- SMPTE 424M, 292M and 259M compliant
- Multi-standard operation from 50Mb/s to 2.97Gb/s
- Performance optimized for 1.485Gb/s and 2.97Gb/s
- Typical equalized length of Belden 1694A cable: 120m at 2.97Gb/s, 200m at 1.485Gb/s, and 350m at 270Mb/s
- Automatic cable equalization
- Multi-Rate re-clocker
- Optical Transmitter
- Hot-Pluggable and Hot-Swappable Optical Module
- Two independent laser disable pins
- SMPTE 297-2006 Compliant
- Single mode transmission
- Supports video Pathological patterns for SD-SDI, HD-SDI and 3G-SDI
- Low power consumption - typically 670mW
- LC Type Connectors
Why not buy this Pyro AV SDI2FBRtx HD-SDI to Fiber Optical Transmitter today?
Questions & Answers
Ask a question about the Pyro AV HD-SDI to Fiber Optical Transmitter or Call 800-841-9238
Pyro AV HD-SDI to Fiber Optical Transmitter
Recently Viewed Items