The Knox RS Series Family of equipment is a line of high performance audio/video routing switchers housed in heavy duty rackmount housings. All units accept and route, on the vertical interval, almost any 1 volt NTSC/PAL or Y/C (optional unit) video input including off-the-air and non-timebase corrected signals.

The RS series accepts and routes mono or stereo, unbalanced audio up to 2 volts p-p and balanced audio from 0 to +4 dbm. Video and audio inputs can be routed independently; they need not have the same destinations. Each source may be routed to multiple destinations via easy to use front panel push buttons or via RS-232 interface. Front panel LEDs indicate current routed crosspoints. Battery backed-up memory stores preset patterns. An internal timer allows timed sequence of patterns. Available in Video Only, Video with Stereo Audio or Video with Balanced Stereo Audio versions.

8x8 Video Switcher - Video Only Features:

• Studio Feed Control
• Switcher Input Control
• Manual/Automatic Timed Surveillance Features
• Multiple Video Inputs To Multiple Video Outputs
• Breakaway Stereo or Mono Audio
• Battery Backup
• Cascadable
• Flat To 8MHz
• Store/Recall Preset Patterns
• Manual & RS-232 Control
• One Year Warranty

8x8 Video Switcher - Video Only Specifications:

• Frequency Response: 20 Hz to 30 KHz
• Input Level: up to 2v p-p
• Input Impedance: 100K
• Output Impedance: 1K
• Crosstalk: <-85 dB @ 1kHz Balanced Audio
• Hum & Noise: <-90db
• Frequency Resp.: 20Hz to 50kHz, +/-1/4dB
• Level: 0,4, or 16dB, clipped at 18
• Impedance: 600 Ohm in/out
• Crosstalk: >90 dB @ 20KHz Video
• Frequency Resp.: DC to 200 MHz; 3 dB @ 115 MHz
• Input Level: 1 volt p-p
• In/Out Imped.: 75 Ohm
• Crosstalk: <-40 dB @ 200MHz General
• Power Consumption: nom. 15vdc 1.5A
• Power Connector: 5.5/2.8mm coaxial DIN
• Unbal. Audio Conn.: RCA
• Bal. Audio Conn.: Phoenix Screwtype
• Video Connectors: Composite: BNC; Y/C: 4-Pin Mini DIN

Why not buy this 8x8 Video Switcher - Video Only today?