HDTV Supply is proud to announce the 4th product in a new line of 1080p component video matrix switchers all with the industry's first 5 year warranty. Manufactured to our specs by a major U.S. manufacturer.
Named the Yukon, after one of the great rivers in the world, it is either an 8X4 or 8X8 Component Video Matrix Switcher.
Also, the digital audio section can be used for switching composite video.
Yukon Component Video Matrix Switcher Summary:
- Switch 8 component inputs to 4 or 8 outputs depending upon model
- Matrixed - Any input can go to any output, or all outputs
- Switches companion digital audio (SPDIF coax cable or optical toslink cable) along with the component video signal
- 1080p (1920 x 1080 @60Hz) rated
- HD DVD and Blu-ray DVD player component video output compatible
- Sony PS3 with component video output compatible
- Able to drive over 100 foot component video cables
- Worldwide power supply
- IR link, RS232 and USB control
- A remote control is included
- Made and supported in the U.S.A. with a five year warranty.
The Yukon component video matrix switcher is an 8 input matrix with either 4 or 8 outputs, designed for switching and distributing high definition video and digital audio throughout the home. This allows the centralization of all video source equipment, and allows those sources to be shared throughout the home, studio or office.
Because it is a matrix switcher, it allows any input to be routed to any output; or the same input to be routed to all outputs or any combination.
This Yukon Component Video Audio Matrix Switch can be used with:
- High definition Dish Network and DirecTV receivers with component outputs
- High definition TiVo's with component outputs
- High definition cable receivers with component outputs
- WII, Sony PS2, PS3, HD DVD and Blu-ray DVD players with component outputs
- Any Xbox with component outputs
- Any DVD player with component outputs
- A/V surround sound receivers / preamps with component switching
- PC video cards with component (Y-Pb-Pr, check your manual) outputs
- and other similar devices with component outputs.
Yukon Component Video Matrix Switcher Features:
- Component video (Y-Pb-Pr) and digital audio (SPDIF coax and Toslink optical)
- Full non-blocking matrix - All outputs can display the same signal, or different signals.
- Independent audio and video switching.
- Cross conversion between both digital audio formats
- Touch screen front panel - no moving parts to jam.
- Multiple controls such as RS-232, USB, IR detector (front) and wired IR (rear)
- Full discrete power control functions
- Front panel lockout, front panel blackout
- Rack mountable with black rack kit. (2U chassis)
- Black or silver chassis with choice of black or silver front panels
- IR codes available in several formats for easy integration
Yukon Component Video Matrix Switcher Specifications:
- Video Bandwidth: 140MHz+ (up to 1080p)
- Analog Audio Bandwidth: 0 Hz to 200KHz
- Digital Audio Modes: PCM, LPCM, Dolby, DTS
- Digital Audio/C-Video Bandwidth: 20MHz
- RS-232: 9600 baud, full two way protocol
- USB: Slave device, Windows driver included, MAC and Linux drivers available, Installs as virtual COM port at 9600 baud
- Rear IR (option): 3.5mm jack for 5V or 12V blaster input, polarity insensitive
- Power Inlet: IEC 320-C14
- Input Voltage: 90-240VAC 50-60Hz, 8W typical
- Dimensions: Width: 17” Height: 3.45” Depth 10.5”
(not including removable feet)
- Weight: 12 lbs
| Video: |
|
| Input coupling |
AC |
| Input impedance/termination |
75 ohms |
| Output coupling |
DC |
| Output impedance |
75 ohms source terminated |
| Output video bandwidth (-3dB) |
140 MHz |
| Crosstalk |
Below –80dB |
| Video modes: |
480i, 480p, 540i, 540p, 576i, 576p, 720p, 1080i, 1080p |
| Video vertical rates: |
24, 25, 29.97, 30, 50, 59.97, 60 |
|
|
| Audio: |
|
| SPDIF input termination |
75 ohms |
| SPDIF input minimum signal |
200mV |
| SPDIF + Toslink max data rate |
12Mb/sec |
| SPDIF output signal |
500mV AC coupled |
Power:
| Input voltage |
90-240V AC 50-60Hz autosensing |
| Input power consumption |
8W “On”, 4W “standby” |
Physical:
| Dimensions
Dim. with feet (removable) |
17”W x 3.5”H x 10.75”D
17”W x 3.75”H x 10.75”D |
| Unit Weight |
8.8 lbs (typical) |
| Shipping weight |
13 lbs (typical) |
Why not buy this Yukon Component Video Matrix Switcher today?
|
