This Kramer 7408 SDI to Analog Converter converts an SDI video signal to composite video and s-Video (Y/C), or component (YUV) video.

Input: 1 SDI SMPTE-259M, ITU-R BT.601 on a BNC connector.

Outputs: 1 reclocked SDI: SMPTE-259M, ITU-R BT.601 on a BNC connector; 1 composite video: 1Vpp / 75 Ohm on a BNC connector; 1 S-Video: 1Vpp, 0.3Vpp / 75 Ohm on two BNC connectors; 1 component video (Y, U and V) on three BNC connectors. (YUV) video.

Kramer 7408 SDI to Analog Converter Features:

• Bandwidth - 5.7MHz (- 3dB).
• Multi-Standard - PAL (B/D/G/H/I/N) & NTSC (3.58/ 4.43).
• NTSC Decoding Options - With or without 7.5IRE setup (pedestal).
• Proc-Amp Control - Brightness, contrast color (saturation), sharpness, and hue (NTSC Only) via RS-232.
• Control - Front panel and RS-232 (Windows based software is included).
• Resolution - 10-bit.
• Looping Input - Reclocked and equalized.
• Compact Size - Part of the Kramer DigiTOOLST family of compact, high quality and cost effective solutions
• Bandwidth - 5.7MHz (- 3dB).
• Multi-Standard - PAL (B/D/G/H/I/N) & NTSC (3.58/ 4.43).
• NTSC Decoding Options - With or without 7.5IRE setup (pedestal).
• Proc-Amp Control - Brightness, contrast color (saturation), sharpness, and hue (NTSC Only) via RS-232.
• Control - Front panel and RS-232 (Windows¬ - based software is included).
• Resolution - 10-bit.
• Looping Input - Reclocked and equalized.
• Compact Size - Part of the Kramer DigiTOOLS» family of compact, high quality and cost effective solutions.

Why not buy this Kramer 7408 SDI to Analog Converter today?