This 16X16 HDMI Matrix Switch over HDMI & CAT5 cabling is the most innovated 4:2 HDMI matrix in the world. Because it is a matrix switcher, it allows any input to be routed to any output; or the same input to be routed to all outputs, or any combination. The 16X16 HDMI Matrix Switch over CAT5 cabling is fully HDMI V1.3 supported. It has 16 standard HDMI inputs, 16 standard HDMI outputs, and 16 dual UTP type HDMI outputs. That means the number of the total outputs is 16X2 = 32 mirrored outputs.
16X16 HDMI Matrix Switch over CAT5 cabling Features:
16 HDMI inputs
16 HDMI standard outputs, 16x2 2 UTP type HDMI outputs, total outputs number up to 32
Allows up to 16 HDMI audio/video devices to be independently switched to 16 HDMI monitors, HDTVs, or projectors.
The 16 outputs could show the same or different source simultaneously no matter the source is HDCP or not.
Each output includes one HDMI a type connecter and a set of dual RJ-45 connecters as the second mirrored HDMI output. The two outputs work simultaneously. The UTP output supports both dual and single cat5e/cat6.
Reading and saving EDID function from displays.
Support high definition resolutions, including 1080p, 1080i, 720p and other standard video formats.
Each port supports both HDMI and DVI inputs.
With extra infrared extension receiver.
8.Seven switching modes: panel buttons, touch panel, local IR, IR call back from remote locations, RS232, RS485 and Ethernet.
16 IR emitters to control the HDMI sources.
Provides three records to save the current state of the matrix routing switch.
Source signal preview.
IR code edits.
User Adjustable EDID helps to eliminate HDMI's troublesome HDCP handshake issue.
Supports 1080p TV's at 24/30/60/100/200/240 Hz and above as well as Blu-rays at 24 FPS
16 IR emitters to control the 16 sources, the IR control is routing type
Multi control methods, manual, IR on front panel, IR on rear extension, IR via UTP from sink, RS232, LAN(TCP/IP)
It supports HDMI signal single UTP cable transmission.
NOTE: 2 - CAT5/6 cables must be used with this device as the 19 HDMI wires are converted to the 2 - CAT5 cables.
Users can choose several different ways to control the 16x16 HDMI Matrix Switch over CAT5: by using infrared extension receiver, RS232, RS485, LAN, touch panel, panel buttons and a supplied remote control. IR emitters in the matrix are for controlling the sources, the IR control signal could be from remote locations via STP/UTP type HDMI connection on the rear panel.
Why not buy this 4x2 HDMI Matrix Switch over CAT cabling today?
HDTV Supply includes a 1 Year Limited U.S. Warranty on this 16x16 HDMI Matrix Switch over CAT5. The U.S. warranty states that (a) its products will perform substantially in accordance with the accompanying written materials for a period of 1 year from the date of receipt and (b) that the 16x16 HDMI Matrix Switch over CAT5 will be free from defects in materials & workmanship under normal use & service for a period of 1 year. In order to get a warranty replacement for a defective item, HDTV Supplys Support Team will verify the 16x16 HDMI Matrix Switch over CAT5 is eligible for warranty. An RMA number will then be issued. Shipped replacements will be in like new conditions, tested and all components included. A 30-day RETURN also comes with this warranty as well as Free Lifetime Tech Support.
HDTV Supply also sells a 3 and 5 Year Extended U.S. Warranty for this 16x16 HDMI Matrix Switch over CAT5. Please go to Extended Warranties or see the above Options to purchase it.
Questions & Answers about this 16x16 HDMI Matrix Switch over CAT5 w/32 Outputs & All Receivers
Ask a question about this 16x16 HDMI Matrix Switch over CAT5 w/32 Outputs & All Receivers
16x16 HDMI Matrix Switch over CAT5 w/32 Outputs & All Receivers