Bob S, a recent buyer said: I needed to run a component signal 75 feet in my bar to a Sharp LCD and didn't have much room for the wire. The component to CAT-5 adapters you sold me work very well and the picture looks great.

This component video + digital audio to CAT5 converter set pair transmits one high definition component video signal and one digital audio signal up to 1,000 feet over a CAT5 or CAT6 cable. The set includes 1 - sending unit and 1 - receiving unit.

NOTE: This device does not support analog right and left audio, only RCA digital audio. See our other component to CAT-5 converters for that.

This Component Video + Digital Audio to CAT5 Converter Set can be used with:

1. High definition Dish Network and DirecTV receivers with component outputs
2. High definition TiVo's with component outputs
3. High definition cable receivers with component outputs
4. WII, Sony PS2, PS3, HD DVD and Blu-ray DVD players with component outputs
5. Any Xbox with component outputs
6. Any DVD player with component outputs
7. A/V surround sound receivers / preamps with component switching
8. and other similar devices with component outputs.

Component Video + Digital Audio to CAT5 Converter Features:

• Component video and/or digital audio signals sent over inexpensive twisted pair wiring
• Supports 480ip, 720p, and 1080i and 1080p and digital audio; HDTV ready
• No external power supply required
• Now RoHS compliant
• Can be used for 2 pairs of right and left stereo audio signals
• Can be used for 4 composite video signals

Any CAT5 cable can be used including Cat 3, Cat 5, Cat 5E, Cat 6, and Cat 7.

This unit features female RCA connectors on both the send and receive baluns. If your requirements are from a computer or with VGA, you may have to use a scaler or conversion box.

Component Video to CAT5 Converter Max Distance:

• Digital audio only: 600 feet
• 480i/p video only: 1,000 feet
• 480i/p video and digital audio: 600 feet
• 720p video only: 500 feet
• 720p video and digital audio: 500 feet
• 1080i/p video only: 500 feet
• 1080i/p video and digital audio: 500 feet

Component Video to CAT5 Converter Bandwidth:

• Video: 60 MHz, 3 dB roll off
• Audio: 25 MHz, 1 dB roll off
• Power: No power required
• Maximum Input: 1.1 Vp-p
• Audio Insertion Loss: Less than 1 dB over the frequency range
• Video Insertion Loss: 0.1 dB for 0.1 MHz. Gradually increasing to 2.5 dB over the frequency range
• Audio Return Loss: Greater than 15 dB over the frequency range
• Video Return Loss: Greater than 15 dB over the frequency range

Component Video to CAT5 Converter Common Mode Rejection:

• 150 dB at 0.1 MHz. Gradually increasing to -30 dB at 25 MHz. Video Common Mode Rejection
• -55 dB at 0.1 MHz. Gradually increasing to -20 dB at 60 MHz.

Component Video to CAT5 Converter Connectors:

• Input: four (4) gold-plated female RCA
• Output: one (1) shielded RJ45
• Red Pin Out: 7 & 8, pair 4
• Blue Pin Out: 1 & 2, pair 2
• Green Pin Out: 3 & 6, pair 3
• Digital Audio Pin Out: 4 & 5, pair 1

Component Video to CAT5 Converter Specs:

• Enclosure: Fire retardant plastic
• Dimensions: 4.3" x 2.5" x 1.0"
• Shipping Weight: 3# each or 6 lbs.
• Temperature: Operating: 32 to 131 degrees F, Storage: -4 to 185 degrees F
• Humidity: up to 95%
• Warranty: 2 years

Your video is only as good as the component video to CAT5 converter that connects it. Why not buy one today?