Home  //  COMPONENT VIDEO MATRIX SWITCHERS  //  4X4 AND ABOVE COMPONENT MATRIX SWITCHERS  //  4X4 Component Audio Video Matrix Switcher

4X4 Component Audio Video Matrix Switcher

4X4 Component Audio Video Matrix Switcher
4X4 Component Audio Video Matrix Switcher



The 1080p rated component video matrix switcher allows you to send any 4 of 4 component audio & video inputs to 4 any outputs.

Order Information
Part No.:CMX44
Extend warranty to 5yrs @ $68:
Rack mount ears:
Companion CAT5 balun set w/cables:
Price:$799.00
Today's price:$729.00 (You Save: 9%)
Availability:Usually ships the same business day
   Quantity:


The 1080p rated Video Storm CMX44 4X4 component video matrix switcher allows you to send 4 of 4 component audio video inputs to four unique outputs. This is a superb unit for bars, restaurants and large homes.

Because it is a matrix switcher, it allows any input to be routed to any output; or the same input to be routed to all outputs or any combination.

4X4 COMPONENT VIDEO MATRIX SWITCHER FEATURES:

  • Add 4 component inputs to your home theater system
  • Switch any 4 of the 4 inputs to 4 independent outputs
    • This unit is a superb switcher for bars, restaurants and large homes
  • Superb build quality to look good in your home theater, bar or restaurant
  • 1080p rated for tomorrows HD equipment as well as todays
  • PS3, Xbox 360, HD DVD and Blu-ray DVD player compatible
  • Will drive a 100 foot component output cable/output
The Video Storm CMX44 4X4 component video matrix switcher integrates everything you need to distribute all your HDTV video and audio sources to 4 different displays throughout your home, bar or restaurant. Each output is individually switchable.

Video Storm CMX44 4X4 component video matrix switcher features 4 input sets, each includes the following:

  • HDTV component video
  • Digital audio Coax / RCA
  • Digital audio TOSLINK / Optical
  • Analog audio R/L
NOTE: The yellow jack is usually dedicated for the switching of digital audio via the RCA connector. It can also be dedicated for composite video switching. One or the other can be used as video and audio on that connector can't be mixed.

4 independently controllable output sets, each includes the following:

  • HDTV component video
  • Digital audio Coax / RCA
  • Digital audio TOSLINK / Optical
  • Analog audio R/L

Other features of the Video Storm CRM44 4X4 component video matrix switcher:

  • Remote IR control with Zerokey code learning ability
  • Optional Sony remote control with down-loadable programming
  • RS-232 input for serial control
  • DC level correction on all video outputs
  • Professional quality video amps capable of driving our component video cables up to 300-feet long
  • Designed and tested to pass all video signals up to and including 1080p
  • 2U steel rack mountable case
  • Optional rack mounting ears

The Video Storm CMX44 has flexible control options and can be controlled by several methods, you can choose the one the best fits your home theater control scheme.

  • Manual control using the front panel buttons
  • IR control using a programmable remote.
  • IR control using your standard remote. Zero key can learn any remote keys to control the CRM44
  • RS-232 control with a PC or your existing home theater controller
Each output is individually switchable. You can configure the CMX44 such that video and audio switch together (normal mode), or video and audio can be controlled separately (advanced mode).

Video Storm CRM44 4X4 component video matrix switcher DC level restoration: The Video Storm CRM44 component video matrix switcher contains an active DC level restoration circuit. The circuit will restore the DC levels on the output video to the proper specification levels regardless of what is present on the input.

The Video Storm CMX44 4X4 component video matrix switcher Video distribution: The Video Storm CMX44 component video matrix switcher is the ideal amplifier for driving long video cables in your home. Many vendors claim their products can do this, but very few can accomplish this without distortion of the video. The most important amplifier design factors in driving long cables are source impedance matching, output connector quality, amplifier bandwidth, and amplifier current drive and slew rate. The amplifier uses the best components for all these, resulting in the best signal distribution you can get. If you are interested in video distribution, please see our information page for more tips on optimizing your network for zero distortion.

The Video Storm CMX44 4X4 component video matrix switcher ZeroKey technology: The matrix switcher can be controlled manually by toggle button, by remote control, or RS-232. The remote control interface uses ZeroKey infrared code cloning to map any remote control key to each of the inputs & outputs. ZeroKey technology is compatible with virtually all remote controls, and does not interfere with the normal operation of the remote.

The Video Storm CMX44 component video matrix switch includes:

  • CMX44 component video matrix switch as pictured
  • 9V desktop power supply
  • Owners manual
  • 3 year labor and one year parts factory direct warranty

Your video is only as good as the component video switcher that connects it. Why not buy this 1080p rated Video Storm CMX44 4X4 component video matrix switcher today?




The Video Storm CMX44 component video matrix switch Specifications:

12 (4 x 3) high definition component video inputs:

  • 75 Ohm terminated at all frequencies
  • Gold plated matched low impedance RCA jacks
  • 1Vpp nominal input swing (Y-pb-pr) or 1.3Vpp (Cvbs) 2.5Vpp maximum
  • Crosstalk < -80 dB

12 (4 x 3) HDTV component video outputs:

  • Source impedance 75 Ohms
  • Gold plated matched low impedance RCA jacks
  • All output sets individually controllable/switchable
  • High performance amplifiers capable of driving over 100ft of our component video cables per output
  • DC level restoration for maximum compatibility
  • Noise spectrum > 60 dB
  • -3dB bandwidth > 100 Mhz

8 (4 x 2) Analog audio inputs + 8 (4 x 2) Analog audio outputs:

  • All are gold plated matched low impedance RCA jacks
  • All feature soft switching to eliminate pops and clicks when changing inputs

4 Optical Digital audio inputs + 4 Optical Digital audio outputs:

  • Optical digital audio inputs have built in shutters, no plugs needed
  • Transcoding selected digital audio, optical => coax & coax => optical
  • Both output sets individually controllable/switchable

4 Coax Digital audio inputs + 4 Coax Digital audio outputs

  • All are gold plated matched low impedance RCA jacks
  • AC coupled to protect all connected equipment
  • Capable of driving over 100-feet of coax cables
  • Transcoding selected digital audio, optical => coax & coax => optical
  • Both output sets individually controllable/switchable
  • IR & RS-232 (DB9 female) control

Internal design

  • Flash programmable micro controller enables ZeroKey remote technology
  • Ultra wide bandwidth t-switch matrix prevents crosstalk or signal distortion
  • Independent professional quality video amplifiers for best performance
  • High reliability capacitors and self resetting fuse protection for long life
  • Designed and manufactured in the USA
  • Housing: Black steel rack mountable housing, 17" x 13" x 3.5" (2 RU)

1X2 & 1X4 Component Video Splitter
1X2 & 1X4 Component Video Splitter

Price: $99.95Today's price: $74.95
(You Save: 25%)

This Component Video Matrix Switch can be used with:

  1. High definition Dish Network and DirecTV receivers with component outputs
  2. High definition TiVo's with component outputs
  3. High definition cable receivers with component outputs
  4. WII, Sony PS2, PS3, HD DVD and Blu-ray DVD players with component outputs
  5. Xbox, Xbox 360 & Xbox 360 Elite with component outputs
  6. Upconverting DVD players with component outputs
  7. A/V surround sound receivers / preamps with component switching
  8. PC video cards with component outputs
  9. and other similar devices with component outputs.




Make us an offer
Name
Email *
Part Number
Offer Price *
$
Dollars
.
Cents
Message
Image Verification
captcha
Please enter the text from the image:
[Refresh Image] [What's This?]
CMX44http://www.hdtvsupply.com/4x4-matrix-switch.html$729.00






4X4 Component Audio Video Matrix Switcher

Questions & Answers about this 4X4 Component Audio Video Matrix Switcher

Ask a question about this 4X4 Component Audio Video Matrix Switcher
Your email:
Your question:

Programming an IR remote for the CMX product line
Programming an IR remote for the CMX product line

Programming an IR remote for the CMX product line

How to program Pronto & Sony remotes for the CMX series
How to program Pronto & Sony remotes for the CMX series

Pronto & Sony RM-AX4000 (A) profile for CMX series matrix Switcher

CMX88 Family Firmware Version 1.1
CMX88 Family Firmware Version 1.1

CMX88 Family Firmware Version 1.1 - This version adds two new features:

1. Programmable power on default: You can save the state of all outputs to flash memory. This state will be restored on power up.

2. Basic mode for CMX1616V and CMX1616A: You can now link all output type switching just like you can on CMX88

RS232 Command Structure for the CMX Line
RS232 Command Structure for the CMX Line

RS232 Command Structure for the CMX Line


4X4 Component Audio Video Matrix Switcher

Recently Viewed Items