Home // CALL FOR AVAILABILITY // 4X2 HDMI Matrix Switch w/CAT5, User Adjustable EDID & 2-HDMI Outs

4X2 HDMI Matrix Switch w/CAT5, User Adjustable EDID & 2-HDMI Outs

4X2 HDMI Matrix Switch with 2 -CAT-5 Outputs and 2-HDMI Outputs - w/User Adjustable EDID Learning & Optional Remote IR - Professional Quality

This 4X2 HDMI over CAT-5 Matrix & HDMI Switcher w/User Adjustable EDID Learning & Optional Remote IR may be the most innovated HDMI matrix switch in the world as it has 2-dual CAT-5 Outputs and 2-HDMI Outputs. The 4X2 HDMI Matrix Switch is fully HDMI V1.3b compliant.

4X2 HDMI over CAT Matrix Switcher Features:

Inputs: 4-HDMI
Outputs: 2-dual UTP type HDMI outputs and requires 2 - CAT5 cables per zone and the above UTP to HDMI receivers or wallplates (see below picture).
Outputs: 2-HDMI outputs
NOTE: Each zone output of CAT5 and HDMI output the the same picture.
Supports both HDMI audio and HDMI video
HDMI V1.3b
Transmission distance reaches up to 50 meters under the video format of 1080p and 2 - CAT6E solid 23 gauge cables.
Optional IR emitters to control the sources with the IR control is the routing type
Multi control methods, manual, IR on front panel, IR on rear extension, IR via UTP from sink, and RS232
Key locking to avoid accidental operation
Special mounting nuts to hold the HDMI cables
Compact size
It supports HDMI signal single UTP cable transmission.
User Adjustable EDID self studying function. Please refer to the user manual that is on the CD that comes with your devices.
RS-232 for computer control
One year parts and labor warranty.
Includes universal AC adapters rated at 100-240V 50/60Hz with 2 prong connector

An User Adjustable EDID learning function is added to increase its capability of compatible. While using UTP type cable to connect the TV, the user can optionally remote control the matrix itself or the source from the sink side via an optional IR receiver.

The function of the IR control is also based on the routing function. So that the user can configure the system much easier than using simple point to point IR connection. To have a secured normal HDMI cable connection, a mounting nut is added on each standard HDMI output port for fixing the cable. TCP/IP LAN control is also offered as an option for professional system integrators. The RS232 control allows the switcher to be controlled by 3rd party control systems like Crestron, AMX and Control4, or any computerized software/hardware control systems.

The 4X2 HDMI over CAT Matrix Switcher are fully HDMI V1.3b supported and have an User Adjustable EDID learning function to increase its capability of compatible.

NOTE: The CAT5 to HDMI receivers used at the HDTV's end are unbundled so you can pick the above quantity you need. They include the connector for adding the above optional remote IR.

This 4X2 HDMI over HDMI & CAT-5 Matrix Switcher w/EDID Learning is a true matrix. It allows any source (Blue-Ray player, HD DVD player, satellite receiver, game system, etc.) to be shown on the any of the displays simultaneously, no matter the source is HDCP or not.

The 4X2 HDMI Matrix Switcher w/User Adjustable EDID Learning has the ability of equalization and amplification to ensure HDMI signal's transmission with long cable without quality loss.

The 4X2 HDMI over HDMI & CAT-5 Matrix Switcher w/User Adjustable EDID Learning offers solutions for digital entertainment center, HDTV retail and show site, HDTV, STB, DVD and projector factory, noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.

User Adjustable EDID Extended Display Identification (EDID) Data is a VESA standard data format that contains basic information about a HDTV and its capabilities, including vendor information, maximum image size, color characteristics, factory pre-set timings, frequency range limits, and character strings for the monitor name and serial number.

The information is stored in the display and is used to communicate with the system through a Display Data Channel (DDC ), which sites between the monitor and the source device. The system uses this information for configuration purposes, so the HDTV and system can work together. Please refer to the user manual that is on the CD that comes with your devices.

While using UTP type cable to connect the sink, the user can remote control the matrix itself or the source from the sink side via an optional IR receiver. The function of the IR control is also based on the routing function so you can configure the system much easier than using simple point to point IR connection.

To have a secured normal HDMI cable connection, a mounting nut is added on each standard HDMI output port for fixing the cable.

The above CAT5 to HDMI Receivers Feature:

Wall plate or stand alone versions, see below picture.
Full functional module, no settings needed.
Use UTP LAN cable（Cat5E/6） to substitute HDMI cable to achieve long distance transmission.
UTP cable termination follows the standard of IEEE-568B.
Transmission distance reaches up to 50 meters under the video format of 1080p and 2 - CAT6E solid 23 gauge cables.
Auto-adjustment of feedback, equalization and amplification so you the the user do not need to care about the length of the cable.
HDMI V1.3b supported.
Signaling rates up to 2.25Gbits in support of 1080p displays.
Each port supports HDMI or DVI inputs.
HDCP compliant.
User Adjustable EDID. Please refer to the user manual that is on the CD that comes with your devices.
With LED indicators to show the power and video signal status.
With ESD protection inside.
Mounting ears supplied.
Transfer Infrared control signal together with the HDMI signal.
These CAT5 to HDMI Receivers can be cascaded.

NOTE: We recommend strongly that you use good CAT5 / 6 cables with any CAT5 / 6 converting products like this one. Most of our "no picture" support calls are due to poor quality and cheap or poorly made cables.

Since it is high definition video we only recommend CAT5/6 cables with specs like our CAT-5 /6 cables either bought from us or another high quality supplier. We also recommend, if possible, pre-made cables that are factory tested vs. field made cables due to the advanced testing methods used.

Why not buy this 4X2 HDMI over HDMI & CAT-5 Matrix Switcher today?

4X2 HDMI over HDMI & CAT-5 Matrix Switcher w/EDID Learning Specs:

Easy to use: install in seconds, no need for setting.
Allows up to four HDMI audio/video devices to be independently switched to four HDMI monitors, HDTVs, or projectors.
The four outputs could show the same or different source at the same time no matter the source is HDCP or not.
The four outputs include one HDMI-A connector and one dual RJ-45 connector. They output the same picture / zone.
Supports high definition resolutions 1080p, 1080i, 720p and standard video format.
Each port supports HDMI, or DVI inputs with an HDMI to DVI adapter.
Supports 1080p HDMI 1.3 TV's at 24/30/60/100/200/240 Hz and above as well as HDMI 1.3 Blu-ray DVD players at 24 FPS
Optionally comes with extra infrared receiver extensions.
Switching modes: panel buttons, RS232, local IR, optional IR call back from remote rooms.
Optional IR emitter for IR call back function to control the HDMI source from remote rooms.
HDCP compliant.
HDMI 1.3b version
19" standard mounting enclosure, 1U size
Includes universal AC adapters rated at 100-240V 50/60Hz with 2 prong connector

HDMI Version 1.3b gives you:

Higher speed: HDMI 1.3b increases its single-link bandwidth to 340 MHz (10.2 Gbps) to support the demands of future HD display devices, such as higher resolutions, Deep Color and high frame rates. In addition, built into the HDMI 1.3 specification is the technical foundation that will let future versions of HDMI reach significantly higher speeds.
Deep Color: HDMI 1.3b supports 10-bit, 12-bit and 16-bit (RGB or YCbCr) color depths, up from the 8-bit depths in previous versions of the HDMI specification, for stunning rendering of over one billion colors in unprecedented detail.
Broader color space: HDMI 1.3 adds support for x.v.Color (which is the consumer name describing the IEC 61966-2-4 xvYCC color standard), which removes current color space limitations and enables the display of any color viewable by the human eye.
New mini connector: With small portable devices such as HD camcorders and still cameras demanding seamless connectivity to HDTVs, HDMI 1.3b offers a new, smaller form factor connector option.
Lip Sync: Because consumer electronics devices are using increasingly complex digital signal processing to enhance the clarity and detail of the content, synchronization of video and audio in user devices has become a greater challenge and could potentially require complex end-user adjustments. HDMI 1.3b incorporates automatic audio syncing capabilities that allows devices to perform this synchronization automatically with total accuracy.
New HD lossless audio formats: In addition to HDMIs current ability to support high-bandwidth uncompressed digital audio and all currently-available compressed formats (such as Dolby Digital and DTS), HDMI 1.3 adds additional support for new lossless compressed digital audio formats Dolby TrueHD and DTS-HD Master Audio.

		CAT6 Shielded Cable for HDMI Converters $29.95
		CAT6 Cable for HD Installs - CAT6 Made For HD See Sale Price
		CAT5E Shielded Cable for HDTV Installs - All Lengths See Sale Price

4X2 HDMI over HDMI & CAT-5 Matrix Switcher w/EDID can be used with:

Any high definition Dish Network and DirecTV receiver with HDMI outputs
High definition TiVo's with HDMI outputs
Any high definition cable receiver with HDMI outputs
Canadian Rogers, Shaw, Bell ExpressVu and Star Choice receivers with HDMI out, or DVI out with a converter
Any "Over The Air" (OTA) high definition receiver with HDMI outputs
Sony PS3, HD DVD and Blu-ray DVD players
Any Xbox360 with HDMI outputs
Any upconverting DVD player with HDMI outputs
Any DVHS VCR with HDMI outputs
An Roku with HDMI outputs
An Vudu with HDMI outputs
An APPLE TV with HDMI outputs
Many PC video card with HDMI outputs
Any high definition camcorder with a standard HDMI out or an optional type C to standard HDMI cable
Many A/V surround sound receivers with HDMI switching that include the proper chip set. Call your AV receiver supplier to discuss your application or us.
Any HDCP compliant HDTV, monitor and projector. If the source is HDCP compliant and your TV is not, you will not get a picture. Please check your TV manual or the manufacturers web site.
and other similar devices.

4X4 HDMI Matrix Switch w/CAT5 & HDMI Outs. RS232, EDID + IR Routing-2D&3D

Price: $999.95
Today's price: $699.95

(You Save: 30%)

HDTVMX0402310http://www.hdtvsupply.com/4x2-hdmi-matrix-switch-cat5.html$699.95

Questions & Answers about this 4X2 HDMI Matrix Switch w/CAT5, User Adjustable EDID & 2-HDMI Outs

Ask a question about this 4X2 HDMI Matrix Switch w/CAT5, User Adjustable EDID & 2-HDMI Outs

		Tips on installing this device Read this before installing your device
		4X2 HDMI Matrix Switch w/2- CAT-5 Outputs & 2-HDMI Outputs User Manual 4X2 HDMI Matrix Switch w/2- CAT-5 Outputs & 2-HDMI Outputs User Manual

4X2 HDMI Matrix Switch w/CAT5, User Adjustable EDID & 2-HDMI Outs