Access up to Two Sources from up to Two Displays with this New HDMI 1.4 2x2 HDMI Matrix Switch

This 2x2 Matrix Switcher for HDMI 1.4 is equipped with two HDMI inputs and two HDMI outputs. Two inputs accommodate the simultaneous connection of up to two high definition video sources, such as satellite systems and Blu-Ray players.

2x2 HDMI Matrix Switch - HDMI 1.4 Features:

• HDMI 1.4
• Support 3840x2160@24Hz/25Hz/30Hz
• Supports 4096x2160@24Hz
• Lip-Sync Pass Through
• Audio Return Channel permits HDTV to send the audio stream to the A/V receiver over the HDMI cable
• 225 MHz (up to 12 bit YUV 444 @ 1080p)
• Deep Color (XV Color)
• Supports sYCC601, Adobe RGB and AdobeYCC601
• Color Space Conversion
• Dolby TrueHD & DTS Master
• CEC Pass Through

All displays that cannot show the same video resolutions as the Primary Display connected to Output #1 may fail to show a picture. Secondary displays follow the Primary by sharing the resolution and capability information (EDID) obtained from the Primary Display. Two outputs send the high definition audio/video signals to up to two HDTV displays and enabling high-speed bi-directional communication.

Because it is a matrix switcher, it allows any input to be routed to any output; or the same input to be routed to all outputs or any combination.

We recommend our FULL HDMI 1.4 cables with this HDMI 1.4 2x2 HDMI Matrix Switch.

Home 3D systems are supported and the unit will enable up to dual-stream 1080p resolution. Switching is done via the included IR remote.

How 2x2 HDMI Matrix Switch - HDMI 1.4 Works: Connect all your sources to the 2x2 Switcher for HDMI 1.4 inputs. Then connect up to two displays on the output ports. Once the sources, the switcher and the displays are powered and connected, you then select which source you want to view using the IR remote.

Why not buy this 2x2 HDMI Matrix Switch - HDMI 1.4 today