Buying from HDTV Supply gives you access to >6,000 discounted AV products to choose from, free lifetime tech support, secure shopping and shipping anywhere in the world and usually on the same day.
This 1X8 VGA Splitter Over CAT5 is an ideal device for local displaying and remote viewing. It combines split function and extension function. It distributes the input of the VGA signal and audio signal into the eight identical outputs simultaneously. 8 receivers are included and their AC adapters.
1X8 VGA Splitter Over CAT5 Features:
Extend VGA video and stereo audio signal max up to 300m over one UTP cat5e/6 cable
Adjusting GAIN and PEAK to adapt for the different length of UTP cable.
GAIN: Brightness adjustment.
PEAK: Skew adjustment.
Support resolution max up to 1920x1200.
Dual output at local unit: 1 x VGA output for local site, plus 8 x UTP output for remote site.
Work with monitors, projectors, HDTV, and flat panels.
Supported resolutions:
640X480
800X600
1024X768
1280X720
1280X768
1280X960
1280X1024
1600X900
1600X1200
1920X1080
1920X1200
NOTE 1: The eight CAT-5 to VGA receivers and their AC adapters are included that install at the TV end. Eight Receivers by Cat5 x1 that are furnished receive the distributed signal from the sender and transmit to displays individually.
Each supplied receiver works with the Sender as a full functional module. Only by the most inexpensive CAT-5E/6 cable the full functional module extends the VGA display up to 300 meters with one of the below cables. This 1X8 VGA Splitter Over CAT5 Cables offer solutions for VGA retail and show site and Projector factory, noise space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.
NOTE 2: We recommend strongly that you use good CAT5 / 6 cables with any CAT5 / 6 converting products like this one. Most of our "no picture" support calls are due to poor quality and cheap or poorly made cables.
Since it is high definition video we only recommend CAT5/6 cables with specs like our CAT-5 /6 cables either bought from us or another high quality supplier. We also recommend, if possible, pre-made cables that are factory tested vs. field made cables due to the advanced testing methods used.
Why not buy this 1X8 VGA Splitter Over CAT5 today?
Q: My picture seem to be off a little, what can I do?
A: Adjust the GAIN & PEAK screws on the side of each receiver and the picture should be perfect. See your 7 page manual for more.
HDTV Supply includes a 1 Year Limited Warranty on this 1X8 VGA Splitter Over CAT5. The warranty states that (a) its products will perform substantially in accordance with the accompanying written materials for a period of 1 year from the date of receipt and (b) that the 1X8 VGA Splitter Over CAT5 will be free from defects in materials & workmanship under normal use & service for a period of 1 year. In order to get a warranty replacement for a defective item, HDTV Supplys Support Team will verify the product is eligible for warranty. An RMA number will then be issued. Shipped replacements will be in like new conditions, tested and all components included. A 30-day RETURN also comes with this warranty.
HDTV Supply also sells a 3 and 5 Year Extended Warranty for this 1X8 VGA Splitter Over CAT5. Please go to Extended Warranties or see the above Options to purchase it.
Questions & Answers about this 1X8 VGA Splitter Over CAT5 to 1,000 Feet
Ask a question about this 1X8 VGA Splitter Over CAT5 to 1,000 Feet