1X4 HDMI Splitter over One CAT6 Cable To ~100'

HDTV Supply

1X4 HDMI Splitter over One CAT6 Cable To ~100'
$300.00
Part Number:
HDTV-04SEK
UPC:
728370333138
Availability:
Usually ships in 1 to 2 weeks
1:
Send one HDMI signal to 4-TV's over 4-CAT6 cables
2:
The 4-CAT6 to HDMI receivers are included
3:
No Power on receivers up to 120' @ 1080p & 200' @ 720p
Make a Fair Offer
Ask an Expert
This 1X4 HDMI Splitter over CAT6 sends one HDMI audio & video signal into the four identical outputs w/only one CAT-5/6 cable per output. The four CAT-5 to HDMI audio & video receivers plus their power supply's are included that install at the TV end.

1X4 HDMI Splitter Over CAT-5 / 6 Features:

  • Extends and distributes HDMI signal to 4 remote HDMI displays over CAT6 cable.
  • Receiver unit no external power required.
  • Supports resolution up to 1080p@60Hz.
  • Transmission distance up to 40M at 1080p, 70M at 720p.
  • Built-in HDMI loop out supports CEC.
  • The transmitter can be stacked to another HE04SET for 1 in 8 out application.
  • HDMI 1.4 compliance.
  • Supports AC3, DTS, Dolby TrueHD, DTS-HD
  • Supports RS232 control.
  • Supports EDID management
The supplied four HDMI CAT6/6/7 Receivers receive the distributed signal from the splitter and transmit to displays individually. Each receiver works with the splitter as a full functional module to extend the HDTV display up to 40 meters for 1080p. The unit is HDCP compliant and supports 1080p TV's at 24/30/60/100/200/240 Hz and above as well as Blu-rays at 24 FPS. This 1X4 HDMI Splitter offers solutions for HDTV retail and show site, HDTV, STB, DVD and Projector factory, noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.

This 1X4 HDMI Splitter Over CAT-5 Works With:

  1. Any high definition Dish Network and DirecTV receiver with HDMI outputs
  2. High definition TiVo's with HDMI outputs
  3. Any high definition cable receiver with HDMI outputs
  4. Canadian Rogers, Shaw, Bell ExpressVu and Star Choice receivers with HDMI out, or DVI out with a converter
  5. Any "Over The Air" (OTA) high definition receiver with HDMI outputs
  6. Sony PS3, HD DVD and Blu-ray DVD players
  7. Any Xbox360 with HDMI outputs
  8. Any upconverting DVD player with HDMI outputs
  9. Any DVHS VCR with HDMI outputs
  10. An APPLE TV with HDMI outputs
  11. Many PC video card with HDMI outputs
  12. Any high definition camcorder with a standard HDMI out or an optional type C to standard HDMI cable
  13. Many A/V surround sound receivers with HDMI switching that include the proper chip set. Call your AV receiver supplier to discuss your application or us.
  14. Any HDCP compliant HDTV, monitor and projector. If the source is HDCP compliant and your TV is not, you will not get a picture. Please check your TV manual or the manufacturers web site.
  15. and other similar devices.

Why not buy this 1X4 HDMI Splitter Over CAT-5 / 6 cable today?

Q: Can I use this HDMI extender to patch through a patch panel & wall plates to connect to a remote TV?
A: No. The CAT6/7 connection between the HDMI Transmitter and Receiver has to be a single, home run, point-to-point patch cable with CAT6 solid being the best cable for new installations. CAT6 will also work well. Patching through patch panels, couplers, wall jacks and poor conductor patch cables create multiple points of signal attenuation (loss), causing the HDMI signal to degrade to the point where the Receiver may not recognize it.

Q: Will this 1X4 HDMI Splitter over One CAT6 Cable support 3D?
A: No, for 3D you will need 1X4 HDMI Splitter over 2-CAT6 Cables Set.

Why not buy this 1X4 HDMI Splitter Over CAT-5 / 6 cable today?