Buying from HDTV Supply gives you access to >6,000 discounted AV products to choose from, free lifetime tech support, secure shopping and shipping anywhere in the world and usually on the same day.
This 1x2 HDMI Splitter w/EDID sends 1 HDMI source to 2 HDMI displays simultaneously. The 1x2 HDMI Splitter has auto-sensing EDID which is normally in professional 1x2 HDMI splitters selling >$500. This 1x2 HDMI Splitters chip-set includes a chip to assure the sound and the picture are in sync and no delays occur between them.
New 2012 1X4 HDMI Splitter Features:
New EDID chip set to prevent another TV turning off when you turn one TV off.
Supports 4080i, 480p, 720i, 720p, 1080i and 1080p resolutions
Unlike other HDMI splitters you do not have to use all the outputs
Conforms to at least HDMI 1.3 specifications for resolutions up to 1920 x 1200
Compatible with all HDMI-equipped, HDCP-enabled HDTV devices
HDMI 1.3 compliant
Built in amplifier Max. cable extension for supporting 10 meters with a 28AWG HDMI cable and 15 meters with a 26AWG HDMI cable. 22AWG or 24AWG recommended.
Universal power supply: 2 prong 100-240V at 50/60Hz AC adapter to 5VDC at 1 amp
Extended Display Identification Data (EDID) is a VESA standard data format that contains basic information about a HDTV and its capabilities, including vendor information, maximum image size, color characteristics, factory pre-set timings, frequency range limits, and character strings for the monitor name and serial number.
The information is stored in the display and is used to communicate with the system through a Display Data Channel (DDC ), which sits between the monitor and the source device. The system uses this information for configuration purposes, so the HDTV and system can work together.
1x2 HDMI Splitter with EDID In's and Outs (see the above front and rear pictures):
1 - Power LED
2 - Power Supply
3 - HDMI input
4 - HDMI Input LED
5 and 8 = HDMI Outputs
6 and 7 - HDMI output LEDs
Why not buy this 1x4 HDMI Splitter with EDID today?
1x2 HDMI Splitter with EDID Specs:
Input Video Signal: 0.5 -1.0 volts p-p
Input DDC Signal: 5 volts p-p (TTL)
Max Single Link Range: 1920X1080, 1080P
HDMI Resolutions: 480p/576i/576p/720p/1080i/1080P
DVI Resolutions: 480p/576i/576p/720p/1080i/1080P
HD Audio format: LPCM,Dolby-AC3, DTS7.1, DSD/Dolby TrueHD/DTS-HD master Audio
This 1x2 HDMI Splitter with EDID can be used with the following devices to send HDMI outputs from them to 2 HDCP compliant projectors, plasma, LCD's and/or HDTV's:
Any high definition Dish Network and DirecTV receiver with HDMI outputs
High definition TiVo's with HDMI outputs
Any high definition cable receiver with HDMI outputs
Canadian Rogers, Shaw, Bell ExpressVu and Star Choice receivers with HDMI out, or DVI out with a converter
Any "Over The Air" (OTA) high definition receiver with HDMI outputs
Sony PS3, HD DVD and Blu-ray DVD players
Any Xbox360 with HDMI outputs
Any upconverting DVD player with HDMI outputs
Any DVHS VCR with HDMI outputs
Any APPLE TV with HDMI outputs
A VuDu with HDMI outputs
Any PC video card with HDMI outputs
Any high definition camcorder with an optional type C to standard HDMI cable
Many A/V surround sound receivers with HDMI switching that include the proper chip set. Call your AV receiver supplier to discuss your application or us.
Any HDCP compliant HDTV, monitor and projector. If the source is HDCP compliant and your TV is not, you will not get a picture. Please check your TV manual or the manufacturers web site.
HDTV Supply is a leader in supplying 3D equipment for this new, fast growing 3DTV market. Our test lab includes the latest equipment for designing, testing and supporting 3D video equipment. The chips sets we use support the below 3D formats and work with many of our HDMI 1.3 and HDMI 1.4 compliant devices. This 1x2 HDMI Splitter with EDID supports these 3D formats:
Side-by-Side 3D Format
Top-and-Bottom 3D Format
Blu-ray 3D Format
Frame packing
and more
We not only test this 1x2 HDMI Splitter with EDID with lab equipment we also test many of our 3D devices with 3D products you are likely to use:
Sony PS3 with the 3D 3.41 firmware
Samsung model PN50C7000YF 3DTV
Samsung model BD-C6900 3D Blu-ray player FORCED to 1080p
Samsung model SSG-P2100T 3D glasses
DirecTV models HR21-100 and the HR24 high definition receiver.
It works with all HDMI devices including the new 3D units.
The 3D viewing results were awesome in our lab and did not have any picture or audio degradation. The normal and standard (2D) results equally exhibited a superb picture quality.
Q: Will this 1x2 HDMI Splitter with EDID work with only one display turned ON?
A: Yes, the outputs are independent and the 1x2 HDMI Splitter with EDID works even when only one display is turned ON. Many HDMI splitters have synchronized outputs which require all displays to be turned ON at the same time for those splitters to work.
Q: If the maximum resolutions of the 2 displays are not the same, what resolution will be output?
A: The 1x2 HDMI Splitter with EDID will automatically detect the maximum supported resolution of each of the 2 displays and output the lowest one. This HDMI splitter with EDID reports back the capabilities of the lowest common denominator display connected to it so that the sending device won't send a signal that every connected device can't handle.
HDTV Supply includes a 1 Year Limited Warranty on this 1x2 HDMI Splitter with EDID. The warranty states that (a) its products will perform substantially in accordance with the accompanying written materials for a period of 1 year from the date of receipt and (b) that the 1x2 HDMI Splitter with EDID will be free from defects in materials & workmanship under normal use & service for a period of 1 year. In order to get a warranty replacement for a defective item, HDTV Supplys Support Team will verify the product is eligible for warranty. An RMA number will then be issued. Shipped replacements will be in like new conditions, tested and all components included. A 30-day RETURN also comes with this warranty.
HDTV Supply also sells a 3 and 5 Year Extended Warranty for this 1x2 HDMI Splitter with EDID. Please go to Extended Warranties or see the above Options to purchase it.
Questions & Answers about this 1x2 HDMI Splitter with EDID & Built-in Booster - 2D&3D
Ask a question about this 1x2 HDMI Splitter with EDID & Built-in Booster - 2D&3D
1x2 HDMI Splitter with EDID & Built-in Booster - 2D&3D
HDTV Supply includes a 1 Year Limited Warranty on this 1x2 HDMI Splitter with EDID. The warranty states that (a) its products will perform substantially in accordance with the accompanying written materials for a period of 1 year from the date of receipt and (b) that the 1x2 HDMI Splitter with EDID will be free from defects in materials & workmanship under normal use & service for a period of 1 year. In order to get a warranty replacement for a defective item, HDTV Supplys Support Team will verify the product is eligible for warranty. An RMA number will then be issued. Shipped replacements will be in like new conditions, tested and all components included. A 30-day RETURN also comes with this warranty.