Buying from HDTV Supply gives you access to >6,000 discounted AV products to choose from, free lifetime tech support, secure shopping and shipping anywhere in the world and usually on the same day.
This 1X2 HDMI Splitter w/3D & Optional IR Extender is HDMI 1.4 compliant & distributes one HDMI signal to two HDMI equipped displays. The 1X2 HDMI Splitter w/3D is designed to HDMI 1.4 specification to support 3D video as well as 2D video.
1X2 HDMI Splitter with HDMI 1.4 compliancy Features:
One HDMI input signal split to two HDMI devices
Supports Full 2D and 3D
HDMI 1.4 compliant and all lower versions
Optionally supports IR to control AV devices
Built-in extender transmits video ~100 feet
Small size fits almost anywhere
HDCP 1.2 protocol compliant
Bandwidth: 2.22 Gbps per channel, 6.65 Gbps total
Supports Full HD1080p 24fps, 60Hz HDMI video
Supports deep color 30 bit and 36 bit
Supports resolution up to 1920 x 1200
Supports standard 24 bit color (RGB/YPbPr) and xvYCC color space
Supports DTS-HD, true-HD, LPCM7.1, AC3, DTS and DSD audio formats.
Supports Blue-Ray 24/50/60fs/HD-DVD/xvYCC
Supports signal retiming
Supports input up to 15 metres AWG24 HDMI 1.3 or 1.4 standard cable lengths and outputs up to 25 metres AWG24 cable length
No loss of quality
Installs in minutes
Includes DC5V/4A power supply
The 1X2 HDMI Splitter w/3D has a built-in signal compensation enables the splitter to be >50 feet from the source and >50 feet from the display using our 24 AWG HDMI cables. The LED display shows activity (blue) or inactivity (red) of the device. The small size of this 1X2 HDMI Splitter w/3D & IR Extender allows them to be placed almost anywhere.
When used with the OPTIONAL IR Extender Kit, equipment can be controlled without installing additional wires to control your source device from the viewing location. Each kit includes 1 target, 1 emitter and 1 HDMI adapter and you can optionally buy one or two.
Why not buy this 1X2 HDMI Splitter w/3D & IR Extender today?
This 1X2 HDMI Splitter w/3D works with the following devices:
Any high definition Dish Network and DirecTV receiver with HDMI outputs
High definition TiVo's with HDMI outputs
Any high definition cable receiver with HDMI outputs
Canadian Rogers, Shaw, Bell ExpressVu and Star Choice receivers with HDMI out, or DVI out with a converter
Any "Over The Air" (OTA) high definition receiver with HDMI outputs
Sony PS3, HD DVD and Blu-ray DVD players
Any Xbox360 with HDMI outputs
Any upconverting DVD player with HDMI outputs
Any DVHS VCR with HDMI outputs
Both APPLE-TV's with HDMI outputs
A Boxee with HDMI ouputs
A VuDu with HDMI outputs
A Roku with HDMI outputs
Many PC video cards with HDMI outputs
Any high definition camcorder with an optional type C to standard HDMI cable
Many A/V surround sound receivers with HDMI switching that include the proper chip set and output amp. Call your AV receiver supplier to discuss your application or us.
Any HDCP compliant HDTV, monitor and projector. If the source is HDCP compliant and your TV is not, you will not get a picture. Please check your TV manual or the manufacturers web site.
HDTV Supply is a leader in supplying 3D equipment for this new, fast growing 3DTV market. Our test lab includes the latest equipment for designing, testing and supporting 3D video equipment. The chips sets we use support the below 3D formats and work with many of our HDMI 1.3 and HDMI 1.4 compliant devices. This 1X2 HDMI Splitter w/3D supports these 3D formats:
Side-by-Side 3D Format
Top-and-Bottom 3D Format
Blu-ray 3D Format
Frame packing
and more
We not only test this 1X2 HDMI Splitter w/3D with lab equipment we also test many of our 3D devices with 3D products you are likely to use:
Sony PS3 with the 3D 3.41 firmware
Samsung model PN50C7000YF 3DTV
Samsung model BD-C6900 3D Blu-ray player FORCED to 1080p
Samsung model SSG-P2100T 3D glasses
DirecTV models HR21-100 and the HR24 high definition receiver.
It works with all HDMI devices including the new 3D units.
The 3D viewing results were awesome in our lab and did not have any picture or audio degradation. The normal and standard (2D) results equally exhibited a superb picture quality.
Q: Is it possible to run both a 1080 and 720 TV from a 1X2 HDMI Splitter w/3D like this?
A: The 1X2 HDMI Splitter w/3D will carry a signal up to 1080p resolution, and the panels will only display what they're capable of displaying. The splitter will not change the resolution of anything along the line, it simply redistributes whatever is fed into it.
HDTV Supply includes a 1 Year Limited Warranty on this 1X2 HDMI Splitter w/3D. The warranty states that (a) its products will perform substantially in accordance with the accompanying written materials for a period of 1 year from the date of receipt and (b) that the 1X2 HDMI Splitter w/3D will be free from defects in materials & workmanship under normal use & service for a period of 1 year. In order to get a warranty replacement for a defective item, HDTV Supplys Support Team will verify the product is eligible for warranty. An RMA number will then be issued. Shipped replacements will be in like new conditions, tested and all components included.
HDTV Supply also sells a 3 and 5 Year Extended Warranty for this 1X2 HDMI Splitter w/3D. Please go to Extended Warranties or see the above Options to purchase it.
Questions & Answers about this 1X2 HDMI Splitter w/3D & IR Extender - HDMI 1.4 Compliant
Ask a question about this 1X2 HDMI Splitter w/3D & IR Extender - HDMI 1.4 Compliant