Buying from HDTV Supply gives you access to >6,000 discounted AV products to choose from, free lifetime tech support, secure shopping and shipping anywhere in the world and usually on the same day.
This 1x16 HDMI Splitter uses a single HDMI source & sends it to up to 16 - HDMI equipped widescreens. It is 2D & 3D compliant.
The 1-16 HDMI Splitter allows one HDMI devices to be split easily to sixteen HDMI compatible monitors or projectors. The 1-16 HDMI Splitter can also be placed at the end of a long HDMI cable to regenerate the HDMI signal.
1-16 HDMI Splitter Features:
One HDMI 1.3 input signal split to sixteen HDMI 1.3 sink devices
HDCP 1.2 protocol compliant
Supports CEC
Supports deep color 30bit, 36bit
Supports Blue-Ray 24/50/60fs/HD-DVD/xvYCC
Digital audio format, as DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
Supports signal retiming
Supports input up to 15 metres AWG24 HDMI 1.3 standard cable length, output up to 25metres AWG24 cable length
No loss of quality
Installs in minutes
Uses DC5V/4A power supply
This 1-16 HDMI Splitter features CEC (Consumer Electronics Control).
This 1-16 HDMI Splitter works with the following devices:
Any high definition Dish Network and DirecTV receiver with HDMI outputs
High definition TiVo's with HDMI outputs
Any high definition cable receiver with HDMI outputs
Canadian Rogers, Shaw, Bell ExpressVu and Star Choice receivers with HDMI out, or DVI out with a converter
Any "Over The Air" (OTA) high definition receiver with HDMI outputs
Sony PS3, HD DVD and Blu-ray DVD players
Any Xbox360 with HDMI outputs
Any upconverting DVD player with HDMI outputs
Any DVHS VCR with HDMI outputs
Both APPLE-TV's with HDMI outputs
A Boxee with HDMI ouputs
A VuDu with HDMI outputs
A Roku with HDMI outputs
Many PC video cards with HDMI outputs
Any high definition camcorder with an optional type C to standard HDMI cable
Many A/V surround sound receivers with HDMI switching that include the proper chip set and output amp. Call your AV receiver supplier to discuss your application or us.
Any HDCP compliant HDTV, monitor and projector. If the source is HDCP compliant and your TV is not, you will not get a picture. Please check your TV manual or the manufacturers web site.
HDTV Supply is a leader in supplying 3D equipment for this new, fast growing 3DTV market. Our test lab includes the latest equipment for designing, testing and supporting 3D video equipment. The chips sets we use support the below 3D formats and work with many of our HDMI 1.3 and HDMI 1.4 compliant devices. This 1-16 HDMI Splitter supports these 3D formats:
Side-by-Side 3D Format
Top-and-Bottom 3D Format
Blu-ray 3D Format
Frame packing
and more
We not only test this 1-16 HDMI Splitter with lab equipment we also test many of our 3D devices with 3D products you are likely to use:
Sony PS3 with the 3D 3.41 firmware
Samsung model PN50C7000YF 3DTV
Samsung model BD-C6900 3D Blu-ray player FORCED to 1080p
Samsung model SSG-P2100T 3D glasses
DirecTV models HR21-100 and the HR24 high definition receiver.
It works with all HDMI devices including the new 3D units.
The 3D viewing results were awesome in our lab and did not have any picture or audio degradation. The normal and standard (2D) results equally exhibited a superb picture quality.
Q: If the resolutions of the 16 displays are not the same, what resolution will be output?
A: The 1x16 HDMI Splitter will usually detects the supported resolution of each of the 16 displays and outputs the lowest one so that the sending device won't send a signal that every connected device can't handle. Also depending upon the devices used with this 1X16 HDMI splitter you may have to manually adjust the source resolution to accommodate the lowest widescreens resolution.
Q: Your product has CEC, what is CEC?
A: This 1-16 HDMI Splitter features CEC (Consumer Electronics Control) allowing your HDTV's remote to manage up to ten devices that are connected via HDMI (such as Blu-ray Disc players or home theater receivers) with no special programming needed. For example, you can use your remote to turn on your TV, your player, and your receiver at the same time, and adjust the system volume with one button. All devices must support CEC, though.
Most major TV manufacturers now support CEC, and an HDTV with HDMI 1.3 will likely have the technology. Manufacturers call it by different names; LG Electronics, for instance, calls its implementation SimpleLink, whereas Toshiba calls its version CE-Link. Interoperability isn't mandatory, so some manufacturers limit control to their own products; Sony, for one, allows only Sony-to-Sony communication.
HDTV Supply includes a 1 Year Limited Warranty on this 1-16 HDMI Splitter. The warranty states that (a) its products will perform substantially in accordance with the accompanying written materials for a period of 1 year from the date of receipt and (b) that the Product will be free from defects in materials & workmanship under normal use & service for a period of 1 year. In order to get a warranty replacement for a defective item, HDTV Supplys Support Team will verify the product is eligible for warranty. An RMA number will then be issued. Shipped replacements will be in like new conditions, tested and all components included.
HDTV Supply also sells a 3 and 5 Year Extended Warranty for this 1x16 HDMI Splitter. Please go to Extended Warranties or see the above Options to purchase it.
Questions & Answers about this 1-16 HDMI Splitter - CEC, 2D & 3D
Ask a question about this 1-16 HDMI Splitter - CEC, 2D & 3D