This 1x2
HDMI Splitter Switch
with a manual AB Pushbutton easily switches one HDMI Source to either of two HDMI displays or amps.Why would I need an HDMI Splitter Switch with a Manual AB Pushbutton?
Since the HDMI Splitter Switch switches between its outputs they are isolated from each display.- If you have a 3D and 2D widescreen and use an standard 1x2 HDMI splitters the EDID from the 2D TV won't allow you to want the other 3DTV. This HDMI Splitter Switch will allow you to switch between them.
- If you want to switch between two outputs for privacy reasons, like in testing, this HDMI Splitter Switch will support that application.
- Switch OFF or ON an HDMI signal for a HDMI matrix switch or HDMI splitter
- Send HDMI audio to an amp when you want surround sound or to the TV when you want to listed to the TVs speakers.
- The source and the amp are isolated for the displays EDID.
- Take an HDMI source and send it to a TV in one room or send it to a TV in another room.
- Take an HDMI source and send it to a TV, OR send it to an HDMI equipped receiver.
- Swap it as it is bi-directional and use it like a 2X1 HDMI switcher.
- There are many other application that may need manually switching of 2 outputs.
HDMI Splitter Switch Features:
- Allows you to select between 2 - TV's, amps, etc and watch video on only one TV
- Supports HD resolutions up to 1080p at a range of 15 feet using 24AWG cables
- Compact chassis for easy installation.
- Font panel AB switch.
- Easy read front panel status LED?.
- Power free
- Full compliance with HDMI Specification v1.0, v1.1, v1.2, v1.3 and v1.4
- Support 3D
- button control
- 2 LED lights indicate the input / output selection and working status
- Plug and Play
Why not buy this HDMI Splitter Switch today?
HDMI Splitter Switch Features:
- Power free
- MAX operation current: 15ma
- Full compliance with the HDMI Specification V1.0,V1.1,V1.2,V1.3
- l Main control: Manual select
- With 2 LED & display working port
- 3 HDMI connectors
- LED :2 (Blue) Display working ports
- Easy install & operation
- Support HDMI Plug & Play
- Support HDMI 1920 * 1080P * 60(MAX)
- Support MAX cable length: 5m (total)
- Plug & Play
- Dimensions: 42*50*25 mm(L,W, H)
- Weight: 35g
- Housing: Plastic
Why not buy this HDMI Splitter Switch today?
This HDMI Splitter Switch can be used with:
- Any high definition Dish Network and DirecTV receiver with HDMI outputs
- High definition TiVo's with HDMI outputs
- Any high definition cable receiver with HDMI outputs
- Canadian Rogers, Shaw, Bell ExpressVu and Star Choice receivers with HDMI out, or DVI out with a converter
- Any "Over The Air" (OTA) high definition receiver with HDMI outputs
- Sony PS3, HD DVD and Blu-ray DVD players
- Any Xbox360 with HDMI outputs
- Any upconverting DVD player with HDMI outputs
- Any DVHS VCR with HDMI outputs
- An APPLE TV with HDMI outputs
- Any PC video card with HDMI outputs
- Any high definition camcorder with an optional type C to standard HDMI cable
- Many A/V surround sound receivers with HDMI switching that include the proper chip set. Call your AV receiver supplier to discuss your application or us.
- Any HDCP compliant HDTV, monitor and projector. If the source is HDCP compliant and your TV is not, you will not get a picture. Please check your TV manual or the manufacturers web site.
- and other similar devices.